|
Daniel Ponsa, Joan Serrat, & Antonio Lopez. (2011). On-board image-based vehicle detection and tracking. TIM - Transactions of the Institute of Measurement and Control, 33(7), 783–805.
Abstract: In this paper we present a computer vision system for daytime vehicle detection and localization, an essential step in the development of several types of advanced driver assistance systems. It has a reduced processing time and high accuracy thanks to the combination of vehicle detection with lane-markings estimation and temporal tracking of both vehicles and lane markings. Concerning vehicle detection, our main contribution is a frame scanning process that inspects images according to the geometry of image formation, and with an Adaboost-based detector that is robust to the variability in the different vehicle types (car, van, truck) and lighting conditions. In addition, we propose a new method to estimate the most likely three-dimensional locations of vehicles on the road ahead. With regards to the lane-markings estimation component, we have two main contributions. First, we employ a different image feature to the other commonly used edges: we use ridges, which are better suited to this problem. Second, we adapt RANSAC, a generic robust estimation method, to fit a parametric model of a pair of lane markings to the image features. We qualitatively assess our vehicle detection system in sequences captured on several road types and under very different lighting conditions. The processed videos are available on a web page associated with this paper. A quantitative evaluation of the system has shown quite accurate results (a low number of false positives and negatives) at a reasonable computation time.
Keywords: vehicle detection
|
|
|
Jose Manuel Alvarez, & Antonio Lopez. (2011). Road Detection Based on Illuminant Invariance. TITS - IEEE Transactions on Intelligent Transportation Systems, 12(1), 184–193.
Abstract: By using an onboard camera, it is possible to detect the free road surface ahead of the ego-vehicle. Road detection is of high relevance for autonomous driving, road departure warning, and supporting driver-assistance systems such as vehicle and pedestrian detection. The key for vision-based road detection is the ability to classify image pixels as belonging or not to the road surface. Identifying road pixels is a major challenge due to the intraclass variability caused by lighting conditions. A particularly difficult scenario appears when the road surface has both shadowed and nonshadowed areas. Accordingly, we propose a novel approach to vision-based road detection that is robust to shadows. The novelty of our approach relies on using a shadow-invariant feature space combined with a model-based classifier. The model is built online to improve the adaptability of the algorithm to the current lighting and the presence of other vehicles in the scene. The proposed algorithm works in still images and does not depend on either road shape or temporal restrictions. Quantitative and qualitative experiments on real-world road sequences with heavy traffic and shadows show that the method is robust to shadows and lighting variations. Moreover, the proposed method provides the highest performance when compared with hue-saturation-intensity (HSI)-based algorithms.
Keywords: road detection
|
|
|
Debora Gil, Aura Hernandez-Sabate, Mireia Brunat, Steven Jansen, & Jordi Martinez-Vilalta. (2011). Structure-preserving smoothing of biomedical images. PR - Pattern Recognition, 44(9), 1842–1851.
Abstract: Smoothing of biomedical images should preserve gray-level transitions between adjacent tissues, while restoring contours consistent with anatomical structures. Anisotropic diffusion operators are based on image appearance discontinuities (either local or contextual) and might fail at weak inter-tissue transitions. Meanwhile, the output of block-wise and morphological operations is prone to present a block structure due to the shape and size of the considered pixel neighborhood. In this contribution, we use differential geometry concepts to define a diffusion operator that restricts to image consistent level-sets. In this manner, the final state is a non-uniform intensity image presenting homogeneous inter-tissue transitions along anatomical structures, while smoothing intra-structure texture. Experiments on different types of medical images (magnetic resonance, computerized tomography) illustrate its benefit on a further process (such as segmentation) of images.
Keywords: Non-linear smoothing; Differential geometry; Anatomical structures; segmentation; Cardiac magnetic resonance; Computerized tomography
|
|
|
Aura Hernandez-Sabate, Debora Gil, Jaume Garcia, & Enric Marti. (2011). Image-based Cardiac Phase Retrieval in Intravascular Ultrasound Sequences. T-UFFC - IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 58(1), 60–72.
Abstract: Longitudinal motion during in vivo pullbacks acquisition of intravascular ultrasound (IVUS) sequences is a major artifact for 3-D exploring of coronary arteries. Most current techniques are based on the electrocardiogram (ECG) signal to obtain a gated pullback without longitudinal motion by using specific hardware or the ECG signal itself. We present an image-based approach for cardiac phase retrieval from coronary IVUS sequences without an ECG signal. A signal reflecting cardiac motion is computed by exploring the image intensity local mean evolution. The signal is filtered by a band-pass filter centered at the main cardiac frequency. Phase is retrieved by computing signal extrema. The average frame processing time using our setup is 36 ms. Comparison to manually sampled sequences encourages a deeper study comparing them to ECG signals.
Keywords: 3-D exploring; ECG; band-pass filter; cardiac motion; cardiac phase retrieval; coronary arteries; electrocardiogram signal; image intensity local mean evolution; image-based cardiac phase retrieval; in vivo pullbacks acquisition; intravascular ultrasound sequences; longitudinal motion; signal extrema; time 36 ms; band-pass filters; biomedical ultrasonics; cardiovascular system; electrocardiography; image motion analysis; image retrieval; image sequences; medical image processing; ultrasonic imaging
|
|
|
Enric Marti, Ferran Poveda, Antoni Gurgui, & Debora Gil. (2011). Aprendizaje Basado en Proyectos en Ingeniería Informática. Resultados y reflexiones de seis años de experiencia.
Abstract: In this workshop a 6 years experience in Project Based Learning (PBL) in Computer Graphics, Computer Engineering course at the Autonomous University of Barcelona (UAB) is presented. We use a Moodle environment suited to manage the documentation generated in PBL. The course is organized by means of two alternative routes: a classic itinerary of lectures and test-based evaluation and another with PBL. In the PBL itinerary we explain the organization in teamgroups, homework tutoring and monitoring and evaluation guidelines for students. We provide some of the work done by students, and the results of assessment surveys carried out to students during these years. We report the evolution of our PBL itinerary in terms of, both, organization and student surveys.
The workshop aims at discussing about on the advantages and disadvantages of using these active methodologies in technical degrees such as computer engineering, in order to debate about the most suitable way of organizing PBL and assessing students learning rate.
|
|
|
David Roche, Debora Gil, & Jesus Giraldo. (2011). An inference model for analyzing termination conditions of Evolutionary Algorithms. In 14th Congrès Català en Intel·ligencia Artificial (pp. 216–225).
Abstract: In real-world problems, it is mandatory to design a termination condition for Evolutionary Algorithms (EAs) ensuring stabilization close to the unknown optimum. Distribution-based quantities are good candidates as far as suitable parameters are used. A main limitation for application to real-world problems is that such parameters strongly depend on the topology of the objective function, as well as, the EA paradigm used.
We claim that the termination problem would be fully solved if we had a model measuring to what extent a distribution-based quantity asymptotically behaves like the solution accuracy. We present a regression-prediction model that relates any two given quantities and reports if they can be statistically swapped as termination conditions. Our framework is applied to two issues. First, exploring if the parameters involved in the computation of distribution-based quantities influence their asymptotic behavior. Second, to what extent existing distribution-based quantities can be asymptotically exchanged for the accuracy of the EA solution.
Keywords: Evolutionary Computation Convergence, Termination Conditions, Statistical Inference
|
|
|
David Roche, Debora Gil, & Jesus Giraldo. (2011). Using statistical inference for designing termination conditions ensuring convergence of Evolutionary Algorithms. In 11th European Conference on Artificial Life.
Abstract: A main challenge in Evolutionary Algorithms (EAs) is determining a termination condition ensuring stabilization close to the optimum in real-world applications. Although for known test functions distribution-based quantities are good candidates (as far as suitable parameters are used), in real-world problems an open question still remains unsolved. How can we estimate an upper-bound for the termination condition value ensuring a given accuracy for the (unknown) EA solution?
We claim that the termination problem would be fully solved if we defined a quantity (depending only on the EA output) behaving like the solution accuracy. The open question would be, then, satisfactorily answered if we had a model relating both quantities, since accuracy could be predicted from the alternative quantity. We present a statistical inference framework addressing two topics: checking the correlation between the two quantities and defining a regression model for predicting (at a given confidence level) accuracy values from the EA output.
|
|
|
Ferran Poveda, Debora Gil, Albert Andaluz, & Enric Marti. (2011). Multiscale Tractography for Representing Heart Muscular Architecture. In In MICCAI 2011 Workshop on Computational Diffusion MRI.
Abstract: Deep understanding of myocardial structure of the heart would unravel crucial knowledge for clinical and medical procedures. Although the muscular architecture of the heart has been debated by countless researchers, the controversy is still alive. Diffusion Tensor MRI, DT-MRI, is a unique imaging technique for computational validation of the muscular structure of the heart. By the complex arrangement of myocites, existing techniques can not provide comprehensive descriptions of the global muscular architecture. In this paper we introduce a multiresolution reconstruction technique based on DT-MRI streamlining for simplified global myocardial model generation. Our reconstructions can restore the most complex myocardial structures and indicate a global helical organization
|
|
|
Debora Gil, Agnes Borras, Manuel Ballester, Francesc Carreras, Ruth Aris, Manuel Vazquez, et al. (2011). MIOCARDIA: Integrating cardiac function and muscular architecture for a better diagnosis. In Association for Computing Machinery (Ed.), 14th International Symposium on Applied Sciences in Biomedical and Communication Technologies. Barcelona, Spain.
Abstract: Deep understanding of myocardial structure of the heart would unravel crucial knowledge for clinical and medical procedures. The MIOCARDIA project is a multidisciplinary project in cooperation with l'Hospital de la Santa Creu i de Sant Pau, Clinica la Creu Blanca and Barcelona Supercomputing Center. The ultimate goal of this project is defining a computational model of the myocardium. The model takes into account the deep interrelation between the anatomy and the mechanics of the heart. The paper explains the workflow of the MIOCARDIA project. It also introduces a multiresolution reconstruction technique based on DT-MRI streamlining for simplified global myocardial model generation. Our reconstructions can restore the most complex myocardial structures and provides evidences of a global helical organization.
|
|
|
Jorge Bernal, F. Javier Sanchez, & Fernando Vilariño. (2011). A Region Segmentation Method for Colonoscopy Images Using a Model of Polyp Appearance. In Mario João and Hernández J. and S. Vitrià (Ed.), 5th Iberian Conference on Pattern Recognition and Image Analysis (Vol. 6669, pp. 134–143 ). LNCS.
Abstract: This work aims at the segmentation of colonoscopy images into a minimum number of informative regions. Our method performs in a way such, if a polyp is present in the image, it will be exclusively and totally contained in a single region. This result can be used in later stages to classify regions as polyp-containing candidates. The output of the algorithm also defines which regions can be considered as non-informative. The algorithm starts with a high number of initial regions and merges them taking into account the model of polyp appearance obtained from available data. The results show that our segmentations of polyp regions are more accurate than state-of-the-art methods.
Keywords: Colonoscopy, Polyp Detection, Region Merging, Region Segmentation.
|
|
|
Jorge Bernal, F. Javier Sanchez, & Fernando Vilariño. (2011). Depth of Valleys Accumulation Algorithm for Object Detection. In 14th Congrès Català en Intel·ligencia Artificial (Vol. 1, pp. 71–80).
Abstract: This work aims at detecting in which regions the objects in the image are by using information about the intensity of valleys, which appear to surround ob- jects in images where the source of light is in the line of direction than the camera. We present our depth of valleys accumulation method, which consists of two stages: first, the definition of the depth of valleys image which combines the output of a ridges and valleys detector with the morphological gradient to measure how deep is a point inside a valley and second, an algorithm that denotes points of the image as interior to objects those which are inside complete or incomplete boundaries in the depth of valleys image. To evaluate the performance of our method we have tested it on several application domains. Our results on object region identification are promising, specially in the field of polyp detection in colonoscopy videos, and we also show its applicability in different areas.
Keywords: Object Recognition, Object Region Identification, Image Analysis, Image Processing
|
|
|
Panagiota Spyridonos, Fernando Vilariño, Jordi Vitria, Petia Radeva, Fernando Azpiroz, & Juan Malagelada. (2011). Device, system and method for automatic detection of contractile activity in an image frame.
Abstract: A device, system and method for automatic detection of contractile activity of a body lumen in an image frame is provided, wherein image frames during contractile activity are captured and/or image frames including contractile activity are automatically detected, such as through pattern recognition and/or feature extraction to trace image frames including contractions, e.g., with wrinkle patterns. A manual procedure of annotation of contractions, e.g. tonic contractions in capsule endoscopy, may consist of the visualization of the whole video by a specialist, and the labeling of the contraction frames. Embodiments of the present invention may be suitable for implementation in an in vivo imaging system.
|
|
|
Gerard Lacey, & Fernando Vilariño. (2011). Endoscopy system with motion sensors.
Abstract: An endoscopy system (1) comprises an endoscope (2) with a camera (3) at its tip. The endoscope extends through an endoscope guide (4) for guiding movement of the endoscope and for measurement of its movement as it enters the body. The guide (4) comprises a generally conical body (5) having a through passage (105) through which the endoscope (2) extends. A motion sensor comprises an optical transmitter (7) and a detector (8) mounted alongside the passage (105) to measure the insertion-withdrawal linear motion and also rotation of the endoscope by the endoscopist's hand. The system (1) also comprises a flexure controller (10) having wheels operated by the endoscopist. The camera (3), the motion sensor (7/8), and the flexure controller (10) are all connected to a processor (11) which feeds a display.
|
|
|
Ferran Diego, Daniel Ponsa, Joan Serrat, & Antonio Lopez. (2011). Video Alignment for Change Detection. TIP - IEEE Transactions on Image Processing, 20(7), 1858–1869.
Abstract: In this work, we address the problem of aligning two video sequences. Such alignment refers to synchronization, i.e., the establishment of temporal correspondence between frames of the first and second video, followed by spatial registration of all the temporally corresponding frames. Video synchronization and alignment have been attempted before, but most often in the relatively simple cases of fixed or rigidly attached cameras and simultaneous acquisition. In addition, restrictive assumptions have been applied, including linear time correspondence or the knowledge of the complete trajectories of corresponding scene points; to some extent, these assumptions limit the practical applicability of any solutions developed. We intend to solve the more general problem of aligning video sequences recorded by independently moving cameras that follow similar trajectories, based only on the fusion of image intensity and GPS information. The novelty of our approach is to pose the synchronization as a MAP inference problem on a Bayesian network including the observations from these two sensor types, which have been proved complementary. Alignment results are presented in the context of videos recorded from vehicles driving along the same track at different times, for different road types. In addition, we explore two applications of the proposed video alignment method, both based on change detection between aligned videos. One is the detection of vehicles, which could be of use in ADAS. The other is online difference spotting videos of surveillance rounds.
Keywords: video alignment
|
|
|
Marco Pedersoli, Jordi Gonzalez, Andrew Bagdanov, & Xavier Roca. (2011). Efficient Discriminative Multiresolution Cascade for Real-Time Human Detection Applications. PRL - Pattern Recognition Letters, 32(13), 1581–1587.
Abstract: Human detection is fundamental in many machine vision applications, like video surveillance, driving assistance, action recognition and scene understanding. However in most of these applications real-time performance is necessary and this is not achieved yet by current detection methods.
This paper presents a new method for human detection based on a multiresolution cascade of Histograms of Oriented Gradients (HOG) that can highly reduce the computational cost of detection search without affecting accuracy. The method consists of a cascade of sliding window detectors. Each detector is a linear Support Vector Machine (SVM) composed of HOG features at different resolutions, from coarse at the first level to fine at the last one.
In contrast to previous methods, our approach uses a non-uniform stride of the sliding window that is defined by the feature resolution and allows the detection to be incrementally refined as going from coarse-to-fine resolution. In this way, the speed-up of the cascade is not only due to the fewer number of features computed at the first levels of the cascade, but also to the reduced number of windows that need to be evaluated at the coarse resolution. Experimental results show that our method reaches a detection rate comparable with the state-of-the-art of detectors based on HOG features, while at the same time the detection search is up to 23 times faster.
|
|