|
|
Ferran Poveda, Debora Gil, & Enric Marti. (2012). Multi-resolution DT-MRI cardiac tractography. In Statistical Atlases And Computational Models Of The Heart: Imaging and Modelling Challenges (Vol. 7746, pp. 270–277). LNCS. Springer Berlin Heidelberg.
Abstract: Even using objective measures from DT-MRI no consensus about myocardial architecture has been achieved so far. Streamlining provides good reconstructions at low level of detail, but falls short to give global abstract interpretations. In this paper, we present a multi-resolution methodology that is able to produce simplified representations of cardiac architecture. Our approach produces a reduced set of tracts that are representative of the main geometric features of myocardial anatomical structure. Experiments show that fiber geometry is preserved along reductions, which validates the simplified model for interpretation of cardiac architecture.
|
|
|
|
Sergio Vera, Miguel Angel Gonzalez Ballester, & Debora Gil. (2012). Optimal Medial Surface Generation for Anatomical Volume Representations. In MichaelW. David and Vannier H. and H. Yoshida (Ed.), Abdominal Imaging. Computational and Clinical Applications (Vol. 7601, pp. 265–273). Lecture Notes in Computer Science. Springer Berlin Heidelberg.
Abstract: Medial representations are a widely used technique in abdominal organ shape representation and parametrization. Those methods require good medial manifolds as a starting point. Any medial
surface used to parametrize a volume should be simple enough to allow an easy manipulation and complete enough to allow an accurate reconstruction of the volume. Obtaining good quality medial
surfaces is still a problem with current iterative thinning methods. This forces the usage of generic, pre-calculated medial templates that are adapted to the final shape at the cost of a drop in volume reconstruction.
This paper describes an operator for generation of medial structures that generates clean and complete manifolds well suited for their further use in medial representations of abdominal organ volumes. While being simpler than thinning surfaces, experiments show its high performance in volume reconstruction and preservation of medial surface main branching topology.
Keywords: Medial surface representation; volume reconstruction
|
|
|
|
Mohammad Rouhani, & Angel Sappa. (2012). Non-Rigid Shape Registration: A Single Linear Least Squares Framework. In 12th European Conference on Computer Vision (Vol. 7578, pp. 264–277). LNCS. Springer Berlin Heidelberg.
Abstract: This paper proposes a non-rigid registration formulation capturing both global and local deformations in a single framework. This formulation is based on a quadratic estimation of the registration distance together with a quadratic regularization term. Hence, the optimal transformation parameters are easily obtained by solving a liner system of equations, which guarantee a fast convergence. Experimental results with challenging 2D and 3D shapes are presented to show the validity of the proposed framework. Furthermore, comparisons with the most relevant approaches are provided.
|
|
|
|
Naveen Onkarappa, Sujay M. Veerabhadrappa, & Angel Sappa. (2012). Optical Flow in Onboard Applications: A Study on the Relationship Between Accuracy and Scene Texture. In 4th International Conference on Signal and Image Processing (Vol. 221, pp. 257–267).
Abstract: Optical flow has got a major role in making advanced driver assistance systems (ADAS) a reality. ADAS applications are expected to perform efficiently in all kinds of environments, those are highly probable, that one can drive the vehicle in different kinds of roads, times and seasons. In this work, we study the relationship of optical flow with different roads, that is by analyzing optical flow accuracy on different road textures. Texture measures such as TeX , TeX and TeX are evaluated for this purpose. Further, the relation of regularization weight to the flow accuracy in the presence of different textures is also analyzed. Additionally, we present a framework to generate synthetic sequences of different textures in ADAS scenarios with ground-truth optical flow.
|
|
|
|
Debora Gil, Agnes Borras, Ruth Aris, Mariano Vazquez, Pierre Lafortune, & Guillame Houzeaux. (2012). What a difference in biomechanics cardiac fiber makes. In Statistical Atlases And Computational Models Of The Heart: Imaging and Modelling Challenges (Vol. 7746, pp. 253–260). Springer Berlin Heidelberg.
Abstract: Computational simulations of the heart are a powerful tool for a comprehensive understanding of cardiac function and its intrinsic relationship with its muscular architecture. Cardiac biomechanical models require a vector field representing the orientation of cardiac fibers. A wrong orientation of the fibers can lead to a
non-realistic simulation of the heart functionality. In this paper we explore the impact of the fiber information on the simulated biomechanics of cardiac muscular anatomy. We have used the John Hopkins database to perform a biomechanical simulation using both a synthetic benchmark fiber distribution and the data obtained experimentally from DTI. Results illustrate how differences in fiber orientation affect heart deformation along cardiac cycle.
|
|
|
|
Muhammad Muzzamil Luqman, Jean-Yves Ramel, & Josep Llados. (2012). Improving Fuzzy Multilevel Graph Embedding through Feature Selection Technique. In Structural, Syntactic, and Statistical Pattern Recognition, Joint IAPR International Workshop (Vol. 7626, pp. 243–253). LNCS. Springer Berlin Heidelberg.
Abstract: Graphs are the most powerful, expressive and convenient data structures but there is a lack of efficient computational tools and algorithms for processing them. The embedding of graphs into numeric vector spaces permits them to access the state-of-the-art computational efficient statistical models and tools. In this paper we take forward our work on explicit graph embedding and present an improvement to our earlier proposed method, named “fuzzy multilevel graph embedding – FMGE”, through feature selection technique. FMGE achieves the embedding of attributed graphs into low dimensional vector spaces by performing a multilevel analysis of graphs and extracting a set of global, structural and elementary level features. Feature selection permits FMGE to select the subset of most discriminating features and to discard the confusing ones for underlying graph dataset. Experimental results for graph classification experimentation on IAM letter, GREC and fingerprint graph databases, show improvement in the performance of FMGE.
|
|
|
|
Ernest Valveny, Robert Benavente, Agata Lapedriza, Miquel Ferrer, Jaume Garcia, & Gemma Sanchez. (2012). Adaptation of a computer programming course to the EXHE requirements: evaluation five years later (Vol. 37).
|
|
|
|
Alicia Fornes, Anjan Dutta, Albert Gordo, & Josep Llados. (2012). CVC-MUSCIMA: A Ground-Truth of Handwritten Music Score Images for Writer Identification and Staff Removal. IJDAR - International Journal on Document Analysis and Recognition, 15(3), 243–251.
Abstract: 0,405JCR
The analysis of music scores has been an active research field in the last decades. However, there are no publicly available databases of handwritten music scores for the research community. In this paper we present the CVC-MUSCIMA database and ground-truth of handwritten music score images. The dataset consists of 1,000 music sheets written by 50 different musicians. It has been especially designed for writer identification and staff removal tasks. In addition to the description of the dataset, ground-truth, partitioning and evaluation metrics, we also provide some base-line results for easing the comparison between different approaches.
Keywords: Music scores; Handwritten documents; Writer identification; Staff removal; Performance evaluation; Graphics recognition; Ground truths
|
|
|
|
Partha Pratim Roy, Umapada Pal, & Josep Llados. (2012). Text line extraction in graphical documents using background and foreground. IJDAR - International Journal on Document Analysis and Recognition, 15(3), 227–241.
Abstract: 0,405 JCR
In graphical documents (e.g., maps, engineering drawings), artistic documents etc., the text lines are annotated in multiple orientations or curvilinear way to illustrate different locations or symbols. For the optical character recognition of such documents, individual text lines from the documents need to be extracted. In this paper, we propose a novel method to segment such text lines and the method is based on the foreground and background information of the text components. To effectively utilize the background information, a water reservoir concept is used here. In the proposed scheme, at first, individual components are detected and grouped into character clusters in a hierarchical way using size and positional information. Next, the clusters are extended in two extreme sides to determine potential candidate regions. Finally, with the help of these candidate regions,
individual lines are extracted. The experimental results are presented on different datasets of graphical documents, camera-based warped documents, noisy images containing seals, etc. The results demonstrate that our approach is robust and invariant to size and orientation of the text lines present in
the document.
|
|
|
|
Simeon Petkov, Adriana Romero, Xavier Carrillo, Petia Radeva, & Carlo Gatta. (2012). Robust and accurate diaphragm border detection in cardiac X-Ray angiographies. In Statistical Atlases And Computational Models Of The Heart: Imaging and Modelling Challenges (Vol. 7746, pp. 225–234). LNCS.
Abstract: Workshop STACOM, dins del MICCAI
X-ray angiography is the most common imaging modality employed in the diagnosis of coronary diseases prior to or during a catheter-based intervention. The analysis of the patient X-Ray sequence can provide useful information about the degree of arterial stenosis, the myocardial perfusion and other clinical parameters. If the sequence has been acquired to evaluate the perfusion grade, the opacity due to the diaphragm could potentially hinder any kind of visual inspection and make more difficult a computer aided measurements. In this paper we propose an accurate and robust method to automatically identify the diaphragm border in each frame. Quantitative evaluation on a set of 11 sequences shows that the proposed algorithm outperforms previous methods.
|
|
|
|
Karel Paleček, David Geronimo, & Frederic Lerasle. (2012). Pre-attention cues for person detection. In Cognitive Behavioural Systems, COST 2102 International Training School (pp. 225–235). LNCS. Springer Berlin Heidelberg.
Abstract: Current state-of-the-art person detectors have been proven reliable and achieve very good detection rates. However, the performance is often far from real time, which limits their use to low resolution images only. In this paper, we deal with candidate window generation problem for person detection, i.e. we want to reduce the computational complexity of a person detector by reducing the number of regions that has to be evaluated. We base our work on Alexe’s paper [1], which introduced several pre-attention cues for generic object detection. We evaluate these cues in the context of person detection and show that their performance degrades rapidly for scenes containing multiple objects of interest such as pictures from urban environment. We extend this set by new cues, which better suits our class-specific task. The cues are designed to be simple and efficient, so that they can be used in the pre-attention phase of a more complex sliding window based person detector.
|
|
|
|
Carolina Malagelada, F.De Lorio, Santiago Segui, S. Mendez, Michal Drozdzal, Jordi Vitria, et al. (2012). Functional gut disorders or disordered gut function? Small bowel dysmotility evidenced by an original technique. NEUMOT - Neurogastroenterology & Motility, 24(3), 223–230.
Abstract: JCR Impact Factor 2010: 3.349
Background This study aimed to determine the proportion of cases with abnormal intestinal motility among patients with functional bowel disorders. To this end, we applied an original method, previously developed in our laboratory, for analysis of endoluminal images obtained by capsule endoscopy. This novel technology is based on computer vision and machine learning techniques.
Methods The endoscopic capsule (Pillcam SB1; Given Imaging, Yokneam, Israel) was administered to 80 patients with functional bowel disorders and 70 healthy subjects. Endoluminal image analysis was performed with a computer vision program developed for the evaluation of contractile events (luminal occlusions and radial wrinkles), non-contractile patterns (open tunnel and smooth wall patterns), type of content (secretions, chyme) and motion of wall and contents. Normality range and discrimination of abnormal cases were established by a machine learning technique. Specifically, an iterative classifier (one-class support vector machine) was applied in a random population of 50 healthy subjects as a training set and the remaining subjects (20 healthy subjects and 80 patients) as a test set.
Key Results The classifier identified as abnormal 29% of patients with functional diseases of the bowel (23 of 80), and as normal 97% of healthy subjects (68 of 70) (P < 0.05 by chi-squared test). Patients identified as abnormal clustered in two groups, which exhibited either a hyper- or a hypodynamic motility pattern. The motor behavior was unrelated to clinical features.
Conclusions & Inferences With appropriate methodology, abnormal intestinal motility can be demonstrated in a significant proportion of patients with functional bowel disorders, implying a pathologic disturbance of gut physiology.
Keywords: capsule endoscopy;computer vision analysis;machine learning technique;small bowel motility
|
|
|
|
Sergio Vera, Debora Gil, Agnes Borras, F. Javier Sanchez, Frederic Perez, Marius G. Linguraru, et al. (2012). Computation and Evaluation of Medial Surfaces for Shape Representation of Abdominal Organs. In H. Yoshida et al (Ed.), Workshop on Computational and Clinical Applications in Abdominal Imaging (Vol. 7029, 223–230). LNCS. Berlin: Springer Link.
Abstract: Medial representations are powerful tools for describing and parameterizing the volumetric shape of anatomical structures. Existing methods show excellent results when applied to 2D
objects, but their quality drops across dimensions. This paper contributes to the computation of medial manifolds in two aspects. First, we provide a standard scheme for the computation of medial
manifolds that avoid degenerated medial axis segments; second, we introduce an energy based method which performs independently of the dimension. We evaluate quantitatively the performance of our
method with respect to existing approaches, by applying them to synthetic shapes of known medial geometry. Finally, we show results on shape representation of multiple abdominal organs,
exploring the use of medial manifolds for the representation of multi-organ relations.
Keywords: medial manifolds, abdomen.
|
|
|
|
Laura Igual, Joan Carles Soliva, Roger Gimeno, Sergio Escalera, Oscar Vilarroya, & Petia Radeva. (2012). Automatic Internal Segmentation of Caudate Nucleus for Diagnosis of Attention Deficit Hyperactivity Disorder. In 9th International Conference on Image Analysis and Recognition (Vol. 7325, pp. 222–229). LNCS.
Abstract: Poster
Studies on volumetric brain Magnetic Resonance Imaging (MRI) showed neuroanatomical abnormalities in pediatric Attention-Deficit/Hyperactivity Disorder (ADHD). In particular, the diminished right caudate volume is one of the most replicated findings among ADHD samples in morphometric MRI studies. In this paper, we propose a fully-automatic method for internal caudate nucleus segmentation based on machine learning. Moreover, the ratio between right caudate body volume and the bilateral caudate body volume is applied in a ADHD diagnostic test. We separately validate the automatic internal segmentation of caudate in head and body structures and the diagnostic test using real data from ADHD and control subjects. As a result, we show accurate internal caudate segmentation and similar performance among the proposed automatic diagnostic test and the manual annotation.
|
|
|
|
David Masip, Alexander Todorov, & Jordi Vitria. (2012). The Role of Facial Regions in Evaluating Social Dime. In Rita Cucchiara V. M. Andrea Fusiello (Ed.), 12th European Conference on Computer Vision – Workshops and Demonstrations (Vol. 7584, pp. 210–219). LNCS. Springer Berlin Heidelberg.
Abstract: Facial trait judgments are an important information cue for people. Recent works in the Psychology field have stated the basis of face evaluation, defining a set of traits that we evaluate from faces (e.g. dominance, trustworthiness, aggressiveness, attractiveness, threatening or intelligence among others). We rapidly infer information from others faces, usually after a short period of time (< 1000ms) we perceive a certain degree of dominance or trustworthiness of another person from the face. Although these perceptions are not necessarily accurate, they influence many important social outcomes (such as the results of the elections or the court decisions). This topic has also attracted the attention of Computer Vision scientists, and recently a computational model to automatically predict trait evaluations from faces has been proposed. These systems try to mimic the human perception by means of applying machine learning classifiers to a set of labeled data. In this paper we perform an experimental study on the specific facial features that trigger the social inferences. Using previous results from the literature, we propose to use simple similarity maps to evaluate which regions of the face influence the most the trait inferences. The correlation analysis is performed using only appearance, and the results from the experiments suggest that each trait is correlated with specific facial characteristics.
Keywords: Workshops and Demonstrations
|
|
