|
|
Sergio Vera, Miguel Angel Gonzalez Ballester, & Debora Gil. (2012). Optimal Medial Surface Generation for Anatomical Volume Representations. In MichaelW. David and Vannier H. and H. Yoshida (Ed.), Abdominal Imaging. Computational and Clinical Applications (Vol. 7601, pp. 265–273). Lecture Notes in Computer Science. Springer Berlin Heidelberg.
Abstract: Medial representations are a widely used technique in abdominal organ shape representation and parametrization. Those methods require good medial manifolds as a starting point. Any medial
surface used to parametrize a volume should be simple enough to allow an easy manipulation and complete enough to allow an accurate reconstruction of the volume. Obtaining good quality medial
surfaces is still a problem with current iterative thinning methods. This forces the usage of generic, pre-calculated medial templates that are adapted to the final shape at the cost of a drop in volume reconstruction.
This paper describes an operator for generation of medial structures that generates clean and complete manifolds well suited for their further use in medial representations of abdominal organ volumes. While being simpler than thinning surfaces, experiments show its high performance in volume reconstruction and preservation of medial surface main branching topology.
Keywords: Medial surface representation; volume reconstruction
|
|
|
|
C. Alejandro Parraga, Robert Benavente, Maria Vanrell, & Ramon Baldrich. (2009). Psychophysical measurements to model inter-colour regions of colour-naming space. Journal of Imaging Science and Technology, 53(3), 031106 (8 pages).
Abstract: JCR Impact Factor 2009: 0.391
In this paper, we present a fuzzy-set of parametric functions which segment the CIE lab space into eleven regions which correspond to the group of common universal categories present in all evolved languages as identified by anthropologists and linguists. The set of functions is intended to model a color-name assignment task by humans and differs from other models in its emphasis on the inter-color boundary regions, which were explicitly measured by means of a psychophysics experiment. In our particular implementation, the CIE lab space was segmented into eleven color categories using a Triple Sigmoid as the fuzzy sets basis, whose parameters are included in this paper. The model’s parameters were adjusted according to the psychophysical results of a yes/no discrimination paradigm where observers had to choose (English) names for isoluminant colors belonging to regions in-between neighboring categories. These colors were presented on a calibrated CRT monitor (14-bit x 3 precision). The experimental results show that inter- color boundary regions are much less defined than expected and color samples other than those near the most representatives are needed to define the position and shape of boundaries between categories. The extended set of model parameters is given as a table.
Keywords: image processing; Analysis
|
|
|
|
Fahad Shahbaz Khan, Joost Van de Weijer, Andrew Bagdanov, & Maria Vanrell. (2011). Portmanteau Vocabularies for Multi-Cue Image Representation. In 25th Annual Conference on Neural Information Processing Systems.
Abstract: We describe a novel technique for feature combination in the bag-of-words model of image classification. Our approach builds discriminative compound words from primitive cues learned independently from training images. Our main observation is that modeling joint-cue distributions independently is more statistically robust for typical classification problems than attempting to empirically estimate the dependent, joint-cue distribution directly. We use Information theoretic vocabulary compression to find discriminative combinations of cues and the resulting vocabulary of portmanteau words is compact, has the cue binding property, and supports individual weighting of cues in the final image representation. State-of-the-art results on both the Oxford Flower-102 and Caltech-UCSD Bird-200 datasets demonstrate the effectiveness of our technique compared to other, significantly more complex approaches to multi-cue image representation
|
|
|
|
Mariano Vazquez, Ruth Aris, Guillaume Hozeaux, R.Aubry, P.Villar, Jaume Garcia, et al. (2011). A massively parallel computational electrophysiology model of the heart. IJNMBE - International Journal for Numerical Methods in Biomedical Engineering, 27, 1911–1929.
Abstract: This paper presents a patient-sensitive simulation strategy capable of using the most efficient way the high-performance computational resources. The proposed strategy directly involves three different players: Computational Mechanics Scientists (CMS), Image Processing Scientists and Cardiologists, each one mastering its own expertise area within the project. This paper describes the general integrative scheme but focusing on the CMS side presents a massively parallel implementation of computational electrophysiology applied to cardiac tissue simulation. The paper covers different angles of the computational problem: equations, numerical issues, the algorithm and parallel implementation. The proposed methodology is illustrated with numerical simulations testing all the different possibilities, ranging from small domains up to very large ones. A key issue is the almost ideal scalability not only for large and complex problems but also for medium-size meshes. The explicit formulation is particularly well suited for solving this highly transient problems, with very short time-scale.
Keywords: computational electrophysiology; parallelization; finite element methods
|
|
|
|
Marcel P. Lucassen, Theo Gevers, & Arjan Gijsenij. (2011). Texture Affects Color Emotion. CRA - Color Research & Applications, 36(6), 426–436.
Abstract: Several studies have recorded color emotions in subjects viewing uniform color (UC) samples. We conduct an experiment to measure and model how these color emotions change when texture is added to the color samples. Using a computer monitor, our subjects arrange samples along four scales: warm–cool, masculine–feminine, hard–soft, and heavy–light. Three sample types of increasing visual complexity are used: UC, grayscale textures, and color textures (CTs). To assess the intraobserver variability, the experiment is repeated after 1 week. Our results show that texture fully determines the responses on the Hard-Soft scale, and plays a role of decreasing weight for the masculine–feminine, heavy–light, and warm–cool scales. Using some 25,000 observer responses, we derive color emotion functions that predict the group-averaged scale responses from the samples' color and texture parameters. For UC samples, the accuracy of our functions is significantly higher (average R2 = 0.88) than that of previously reported functions applied to our data. The functions derived for CT samples have an accuracy of R2 = 0.80. We conclude that when textured samples are used in color emotion studies, the psychological responses may be strongly affected by texture. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010
Keywords: color;texture;color emotion;observer variability;ranking
|
|
|
|
Kaida Xiao, Chenyang Fu, D.Mylonas, Dimosthenis Karatzas, & S. Wuerger. (2013). Unique Hue Data for Colour Appearance Models. Part ii: Chromatic Adaptation Transform. CRA - Color Research & Application, 38(1), 22–29.
Abstract: Unique hue settings of 185 observers under three room-lighting conditions were used to evaluate the accuracy of full and mixed chromatic adaptation transform models of CIECAM02 in terms of unique hue reproduction. Perceptual hue shifts in CIECAM02 were evaluated for both models with no clear difference using the current Commission Internationale de l'Éclairage (CIE) recommendation for mixed chromatic adaptation ratio. Using our large dataset of unique hue data as a benchmark, an optimised parameter is proposed for chromatic adaptation under mixed illumination conditions that produces more accurate results in unique hue reproduction. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2013
|
|
|
|
Olivier Penacchio. (2011). Mixed Hodge Structures and Equivariant Sheaves on the Projective Plane. MN - Mathematische Nachrichten, 284(4), 526–542.
Abstract: We describe an equivalence of categories between the category of mixed Hodge structures and a category of equivariant vector bundles on a toric model of the complex projective plane which verify some semistability condition. We then apply this correspondence to define an invariant which generalizes the notion of R-split mixed Hodge structure and give calculations for the first group of cohomology of possibly non smooth or non-complete curves of genus 0 and 1. Finally, we describe some extension groups of mixed Hodge structures in terms of equivariant extensions of coherent sheaves. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Keywords: Mixed Hodge structures, equivariant sheaves, MSC (2010) Primary: 14C30, Secondary: 14F05, 14M25
|
|
|
|
Armin Mehri, & Angel Sappa. (2019). Colorizing Near Infrared Images through a Cyclic Adversarial Approach of Unpaired Samples. In IEEE International Conference on Computer Vision and Pattern Recognition-Workshops.
Abstract: This paper presents a novel approach for colorizing near infrared (NIR) images. The approach is based on image-to-image translation using a Cycle-Consistent adversarial network for learning the color channels on unpaired dataset. This architecture is able to handle unpaired datasets. The approach uses as generators tailored networks that require less computation times, converge faster and generate high quality samples. The obtained results have been quantitatively—using standard evaluation metrics—and qualitatively evaluated showing considerable improvements with respect to the state of the art
|
|
|
|
B. Zhou, Agata Lapedriza, J. Xiao, A. Torralba, & A. Oliva. (2014). Learning Deep Features for Scene Recognition using Places Database. In 28th Annual Conference on Neural Information Processing Systems (pp. 487–495).
|
|
|
|
Enric Marti, Jordi Regincos, Jaime Lopez-Krahe, & Juan J.Villanueva. (1993). Hand line drawing interpretation as three-dimensional objects. Signal Processing – Intelligent systems for signal and image understanding, 32(1-2), 91–110.
Abstract: In this paper we present a technique to interpret hand line drawings as objects in a three-dimensional space. The object domain considered is based on planar surfaces with straight edges, concretely, on ansextension of Origami world to hidden lines. The line drawing represents the object under orthographic projection and it is sensed using a scanner. Our method is structured in two modules: feature extraction and feature interpretation. In the first one, image processing techniques are applied under certain tolerance margins to detect lines and junctions on the hand line drawing. Feature interpretation module is founded on line labelling techniques using a labelled junction dictionary. A labelling algorithm is here proposed. It uses relaxation techniques to reduce the number of incompatible labels with the junction dictionary so that the convergence of solutions can be accelerated. We formulate some labelling hypotheses tending to eliminate elements in two sets of labelled interpretations. That is, those which are compatible with the dictionary but do not correspond to three-dimensional objects and those which represent objects not very probable to be specified by means of a line drawing. New entities arise on the line drawing as a result of the extension of Origami world. These are defined to enunciate the assumptions of our method as well as to clarify the algorithms proposed. This technique is framed in a project aimed to implement a system to create 3D objects to improve man-machine interaction in CAD systems.
Keywords: Line drawing interpretation; line labelling; scene analysis; man-machine interaction; CAD input; line extraction
|
|
|
|
Joel Barajas, Jaume Garcia, Francesc Carreras, Sandra Pujades, & Petia Radeva. (2005). Angle Images Using Gabor Filters in Cardiac Tagged MRI. In Proceeding of the 2005 conference on Artificial Intelligence Research and Development (pp. 107–114). Amsterdam, The Netherlands: IOS Press.
Abstract: Tagged Magnetic Resonance Imaging (MRI) is a non-invasive technique used to examine cardiac deformation in vivo. An Angle Image is a representation of a Tagged MRI which recovers the relative position of the tissue respect to the distorted tags. Thus cardiac deformation can be estimated. This paper describes a new approach to generate Angle Images using a bank of Gabor filters in short axis cardiac Tagged MRI. Our method improves the Angle Images obtained by global techniques, like HARP, with a local frequency analysis. We propose to use the phase response of a combination of a Gabor filters bank, and use it to find a more precise deformation of the left ventricle. We demonstrate the accuracy of our method over HARP by several experimental results.
Keywords: Angle Images, Gabor Filters, Harp, Tagged Mri
|
|
|
|
Josep Llados, Horst Bunke, & Enric Marti. (1997). Using Cyclic String Matching to Find Rotational and Reflectional Symmetries in Shapes. In Intelligent Robots: Sensing, Modeling and Planning (pp. 164–179). World Scientific Press.
Abstract: Dagstuhl Workshop
|
|
|
|
Josep Llados, Ernest Valveny, Gemma Sanchez, & Enric Marti. (2002). Symbol recognition: current advances and perspectives. In Dorothea Blostein and Young- Bin Kwon (Ed.), Graphics Recognition Algorithms And Applications (Vol. 2390, pp. 104–128). LNCS. Springer-Verlag.
Abstract: The recognition of symbols in graphic documents is an intensive research activity in the community of pattern recognition and document analysis. A key issue in the interpretation of maps, engineering drawings, diagrams, etc. is the recognition of domain dependent symbols according to a symbol database. In this work we first review the most outstanding symbol recognition methods from two different points of view: application domains and pattern recognition methods. In the second part of the paper, open and unaddressed problems involved in symbol recognition are described, analyzing their current state of art and discussing future research challenges. Thus, issues such as symbol representation, matching, segmentation, learning, scalability of recognition methods and performance evaluation are addressed in this work. Finally, we discuss the perspectives of symbol recognition concerning to new paradigms such as user interfaces in handheld computers or document database and WWW indexing by graphical content.
|
|
|
|
Zhengying Liu, Zhen Xu, Shangeth Rajaa, Meysam Madadi, Julio C. S. Jacques Junior, Sergio Escalera, et al. (2020). Towards Automated Deep Learning: Analysis of the AutoDL challenge series 2019. In Proceedings of Machine Learning Research (Vol. 123, pp. 242–252).
Abstract: We present the design and results of recent competitions in Automated Deep Learning (AutoDL). In the AutoDL challenge series 2019, we organized 5 machine learning challenges: AutoCV, AutoCV2, AutoNLP, AutoSpeech and AutoDL. The first 4 challenges concern each a specific application domain, such as computer vision, natural language processing and speech recognition. At the time of March 2020, the last challenge AutoDL is still on-going and we only present its design. Some highlights of this work include: (1) a benchmark suite of baseline AutoML solutions, with emphasis on domains for which Deep Learning methods have had prior success (image, video, text, speech, etc); (2) a novel any-time learning framework, which opens doors for further theoretical consideration; (3) a repository of around 100 datasets (from all above domains) over half of which are released as public datasets to enable research on meta-learning; (4) analyses revealing that winning solutions generalize to new unseen datasets, validating progress towards universal AutoML solution; (5) open-sourcing of the challenge platform, the starting kit, the dataset formatting toolkit, and all winning solutions (All information available at {autodl.chalearn.org}).
|
|
|
|
Patricia Marquez, Debora Gil, Aura Hernandez-Sabate, & Daniel Kondermann. (2013). When Is A Confidence Measure Good Enough? In 9th International Conference on Computer Vision Systems (Vol. 7963, pp. 344–353). LNCS. Springer Link.
Abstract: Confidence estimation has recently become a hot topic in image processing and computer vision.Yet, several definitions exist of the term “confidence” which are sometimes used interchangeably. This is a position paper, in which we aim to give an overview on existing definitions,
thereby clarifying the meaning of the used terms to facilitate further research in this field. Based on these clarifications, we develop a theory to compare confidence measures with respect to their quality.
Keywords: Optical flow, confidence measure, performance evaluation
|
|
