|
Frederic Sampedro, Anna Domenech, Sergio Escalera, & Ignasi Carrio. (2017). Computing quantitative indicators of structural renal damage in pediatric DMSA scans. REMNIM - Revista Española de Medicina Nuclear e Imagen Molecular, 36(2), 72–77.
Abstract: OBJECTIVES:
The proposal and implementation of a computational framework for the quantification of structural renal damage from 99mTc-dimercaptosuccinic acid (DMSA) scans. The aim of this work is to propose, implement, and validate a computational framework for the quantification of structural renal damage from DMSA scans and in an observer-independent manner.
MATERIALS AND METHODS:
From a set of 16 pediatric DMSA-positive scans and 16 matched controls and using both expert-guided and automatic approaches, a set of image-derived quantitative indicators was computed based on the relative size, intensity and histogram distribution of the lesion. A correlation analysis was conducted in order to investigate the association of these indicators with other clinical data of interest in this scenario, including C-reactive protein (CRP), white cell count, vesicoureteral reflux, fever, relative perfusion, and the presence of renal sequelae in a 6-month follow-up DMSA scan.
RESULTS:
A fully automatic lesion detection and segmentation system was able to successfully classify DMSA-positive from negative scans (AUC=0.92, sensitivity=81% and specificity=94%). The image-computed relative size of the lesion correlated with the presence of fever and CRP levels (p<0.05), and a measurement derived from the distribution histogram of the lesion obtained significant performance results in the detection of permanent renal damage (AUC=0.86, sensitivity=100% and specificity=75%).
CONCLUSIONS:
The proposal and implementation of a computational framework for the quantification of structural renal damage from DMSA scans showed a promising potential to complement visual diagnosis and non-imaging indicators.
|
|
|
Simone Balocco, Maria Zuluaga, Guillaume Zahnd, Su-Lin Lee, & Stefanie Demirci. (2016). Computing and Visualization for Intravascular Imaging and Computer Assisted Stenting. Elsevier.
|
|
|
Cristina Sanchez Montes, F. Javier Sanchez, Jorge Bernal, Henry Cordova, Maria Lopez Ceron, Miriam Cuatrecasas, et al. (2019). Computer-aided Prediction of Polyp Histology on White-Light Colonoscopy using Surface Pattern Analysis. END - Endoscopy, 51(3), 261–265.
Abstract: Background and study aims: To evaluate a new computational histology prediction system based on colorectal polyp textural surface patterns using high definition white light images.
Patients and methods: Textural elements (textons) were characterized according to their contrast with respect to the surface, shape and number of bifurcations, assuming that dysplastic polyps are associated with highly contrasted, large tubular patterns with some degree of bifurcation. Computer-aided diagnosis (CAD) was compared with pathological diagnosis and the diagnosis by the endoscopists using Kudo and NICE classification.
Results: Images of 225 polyps were evaluated (142 dysplastic and 83 non-dysplastic). CAD system correctly classified 205 (91.1%) polyps, 131/142 (92.3%) dysplastic and 74/83 (89.2%) non-dysplastic. For the subgroup of 100 diminutive (<5 mm) polyps, CAD correctly classified 87 (87%) polyps, 43/50 (86%) dysplastic and 44/50 (88%) non-dysplastic. There were not statistically significant differences in polyp histology prediction based on CAD system and on endoscopist assessment.
Conclusion: A computer vision system based on the characterization of the polyp surface in the white light accurately predicts colorectal polyp histology.
|
|
|
Francesco Ciompi, Simone Balocco, Juan Rigla, Xavier Carrillo, J. Mauri, & Petia Radeva. (2016). Computer-Aided Detection of Intra-Coronary Stent in Intravascular Ultrasound Sequences. MP - Medical Physics, 43(10).
Abstract: Purpose: An intraluminal coronary stent is a metal mesh tube deployed in a stenotic artery during Percutaneous Coronary Intervention (PCI), in order to prevent acute vessel occlusion. The identication of struts location and the denition of the stent shape are relevant for PCI planning 15 and for patient follow-up. We present a fully-automatic framework for Computer-Aided Detection
(CAD) of intra-coronary stents in Intravascular Ultrasound (IVUS) image sequences. The CAD system is able to detect stent struts and estimate the stent shape.
Methods: The proposed CAD uses machine learning to provide a comprehensive interpretation of the local structure of the vessel by means of semantic classication. The output of the classication 20 stage is then used to detect struts and to estimate the stent shape. The proposed approach is validated using a multi-centric data-set of 1,015 images from 107 IVUS sequences containing both metallic and bio-absorbable stents.
Results: The method was able to detect structs in both metallic stents with an overall F-measure of 77.7% and a mean distance of 0.15 mm from manually annotated struts, and in bio-absorbable 25 stents with an overall F-measure of 77.4% and a mean distance of 0.09 mm from manually annotated struts.
Conclusions: The results are close to the inter-observer variability and suggest that the system has the potential of being used as method for aiding percutaneous interventions.
|
|
|
Josep Llados. (2006). Computer Vision: Progress of Research and Development ( J. Llados(ed.), Ed.).
|
|
|
Debora Gil, Jordi Gonzalez, & Gemma Sanchez (Eds.). (2007). Computer Vision: Advances in Research and Development. 2. Bellaterra (Spain): UAB.
|
|
|
Jorge Bernal, & David Vazquez (Eds.). (2013). Computer vision Trends and Challenges.
Abstract: This book contains the papers presented at the Eighth CVC Workshop on Computer Vision Trends and Challenges (CVCR&D'2013). The workshop was held at the Computer Vision Center (Universitat Autònoma de Barcelona), the October 25th, 2013. The CVC workshops provide an excellent opportunity for young researchers and project engineers to share new ideas and knowledge about the progress of their work, and also, to discuss about challenges and future perspectives. In addition, the workshop is the welcome event for new people that recently have joined the institute.
The program of CVCR&D is organized in a single-track single-day workshop. It comprises several sessions dedicated to specific topics. For each session, a doctor working on the topic introduces the general research lines. The PhD students expose their specific research. A poster session will be held for open questions. Session topics cover the current research lines and development projects of the CVC: Medical Imaging, Medical Imaging, Color & Texture Analysis, Object Recognition, Image Sequence Evaluation, Advanced Driver Assistance Systems, Machine Vision, Document Analysis, Pattern Recognition and Applications. We want to thank all paper authors and Program Committee members. Their contribution shows that the CVC has a dynamic, active, and promising scientific community.
We hope you all enjoy this Eighth workshop and we are looking forward to meeting you and new people next year in the Ninth CVCR&D.
Keywords: CVCRD; Computer Vision
|
|
|
Gemma Sanchez, Alicia Fornes, Joan Mas, & Josep Llados. (2007). Computer Vision Tools for Visually Impaired Children Learning.
|
|
|
Gemma Sanchez, Alicia Fornes, Joan Mas, & Josep Llados. (2007). Computer Vision Tools for Visually Impaired Children Learning.
|
|
|
Joan M. Nuñez. (2011). Computer vision techniques for characterization of finger joints in X-ray image (Dr. Fernando Vilariño and Dra. Debora Gil, Ed.) (Vol. 165). Master's thesis, , .
Abstract: Rheumatoid arthritis (RA) is an autoimmune inflammatory type of arthritis which mainly affects hands on its first stages. Though it is a chronic disease and there is no cure for it, treatments require an accurate assessment of illness evolution. Such assessment is based on evaluation of hand X-ray images by using one of the several available semi-quantitative methods. This task requires highly trained medical personnel. That is why the automation of the assessment would allow professionals to save time and effort. Two stages are involved in this task. Firstly, the joint detection, afterwards, the joint characterization. Unlike the little existing previous work, this contribution clearly separates those two stages and sets the foundations of a modular assessment system focusing on the characterization stage. A hand joint dataset is created and an accurate data analysis is achieved in order to identify relevant features. Since the sclerosis and the lower bone were decided to be the most important features, different computer vision techniques were used in order to develop a detector system for both of them. Joint space width measures are provided and their correlation with Sharp-Van der Heijde is verified
Keywords: Rheumatoid arthritis, X-ray, Sharp Van der Heijde, joint characterization, sclerosis detection, bone detection, edge, ridge
|
|
|
Antonio Lopez, Atsushi Imiya, Tomas Pajdla, & Jose Manuel Alvarez. (2017). Computer Vision in Vehicle Technology: Land, Sea & Air. John Wiley & Sons, Ltd.
Abstract: Summary This chapter examines different vision-based commercial solutions for real-live problems related to vehicles. It is worth mentioning the recent astonishing performance of deep convolutional neural networks (DCNNs) in difficult visual tasks such as image classification, object recognition/localization/detection, and semantic segmentation. In fact,
different DCNN architectures are already being explored for low-level tasks such as optical flow and disparity computation, and higher level ones such as place recognition.
|
|
|
Antonio Lopez, Atsushi Imiya, Tomas Pajdla, & Jose Manuel Alvarez. Computer Vision in Vehicle Technology: Land, Sea & Air.
Abstract: A unified view of the use of computer vision technology for different types of vehicles
Computer Vision in Vehicle Technology focuses on computer vision as on-board technology, bringing together fields of research where computer vision is progressively penetrating: the automotive sector, unmanned aerial and underwater vehicles. It also serves as a reference for researchers of current developments and challenges in areas of the application of computer vision, involving vehicles such as advanced driver assistance (pedestrian detection, lane departure warning, traffic sign recognition), autonomous driving and robot navigation (with visual simultaneous localization and mapping) or unmanned aerial vehicles (obstacle avoidance, landscape classification and mapping, fire risk assessment).
The overall role of computer vision for the navigation of different vehicles, as well as technology to address on-board applications, is analysed.
|
|
|
Michael Teutsch, Angel Sappa, & Riad I. Hammoud. (2021). Computer Vision in the Infrared Spectrum: Challenges and Approaches (Vol. 10).
Abstract: Human visual perception is limited to the visual-optical spectrum. Machine vision is not. Cameras sensitive to the different infrared spectra can enhance the abilities of autonomous systems and visually perceive the environment in a holistic way. Relevant scene content can be made visible especially in situations, where sensors of other modalities face issues like a visual-optical camera that needs a source of illumination. As a consequence, not only human mistakes can be avoided by increasing the level of automation, but also machine-induced errors can be reduced that, for example, could make a self-driving car crash into a pedestrian under difficult illumination conditions. Furthermore, multi-spectral sensor systems with infrared imagery as one modality are a rich source of information and can provably increase the robustness of many autonomous systems. Applications that can benefit from utilizing infrared imagery range from robotics to automotive and from biometrics to surveillance. In this book, we provide a brief yet concise introduction to the current state-of-the-art of computer vision and machine learning in the infrared spectrum. Based on various popular computer vision tasks such as image enhancement, object detection, or object tracking, we first motivate each task starting from established literature in the visual-optical spectrum. Then, we discuss the differences between processing images and videos in the visual-optical spectrum and the various infrared spectra. An overview of the current literature is provided together with an outlook for each task. Furthermore, available and annotated public datasets and common evaluation methods and metrics are presented. In a separate chapter, popular applications that can greatly benefit from the use of infrared imagery as a data source are presented and discussed. Among them are automatic target recognition, video surveillance, or biometrics including face recognition. Finally, we conclude with recommendations for well-fitting sensor setups and data processing algorithms for certain computer vision tasks. We address this book to prospective researchers and engineers new to the field but also to anyone who wants to get introduced to the challenges and the approaches of computer vision using infrared images or videos. Readers will be able to start their work directly after reading the book supported by a highly comprehensive backlog of recent and relevant literature as well as related infrared datasets including existing evaluation frameworks. Together with consistently decreasing costs for infrared cameras, new fields of application appear and make computer vision in the infrared spectrum a great opportunity to face nowadays scientific and engineering challenges.
|
|
|
Albert Ali Salah, Theo Gevers, Nicu Sebe, & Alessandro Vinciarelli. (2011). Computer Vision for Ambient Intelligence. JAISE - Journal of Ambient Intelligence and Smart Environments, 3(3), 187–191.
|
|
|
Henry Velesaca, Patricia Suarez, Raul Mira, & Angel Sappa. (2021). Computer Vision based Food Grain Classification: a Comprehensive Survey. CEA - Computers and Electronics in Agriculture, 187, 106287.
Abstract: This manuscript presents a comprehensive survey on recent computer vision based food grain classification techniques. It includes state-of-the-art approaches intended for different grain varieties. The approaches proposed in the literature are analyzed according to the processing stages considered in the classification pipeline, making it easier to identify common techniques and comparisons. Additionally, the type of images considered by each approach (i.e., images from the: visible, infrared, multispectral, hyperspectral bands) together with the strategy used to generate ground truth data (i.e., real and synthetic images) are reviewed. Finally, conclusions highlighting future needs and challenges are presented.
|
|