|
|
Enric Marti, Ferran Poveda, Antoni Gurgui, & Debora Gil. (2011). Aprendizaje Basado en Proyectos en Ingeniería Informática. Resultados y reflexiones de seis años de experiencia.
Abstract: In this workshop a 6 years experience in Project Based Learning (PBL) in Computer Graphics, Computer Engineering course at the Autonomous University of Barcelona (UAB) is presented. We use a Moodle environment suited to manage the documentation generated in PBL. The course is organized by means of two alternative routes: a classic itinerary of lectures and test-based evaluation and another with PBL. In the PBL itinerary we explain the organization in teamgroups, homework tutoring and monitoring and evaluation guidelines for students. We provide some of the work done by students, and the results of assessment surveys carried out to students during these years. We report the evolution of our PBL itinerary in terms of, both, organization and student surveys.
The workshop aims at discussing about on the advantages and disadvantages of using these active methodologies in technical degrees such as computer engineering, in order to debate about the most suitable way of organizing PBL and assessing students learning rate.
|
|
|
|
Maria Salamo, & Sergio Escalera. (2011). Increasing Retrieval Quality in Conversational Recommenders. TKDE - IEEE Transactions on Knowledge and Data Engineering, 99, 1.
Abstract: IF JCR CCIA 2.286 2009 24/103
JCR Impact Factor 2010: 1.851
A major task of research in conversational recommender systems is personalization. Critiquing is a common and powerful form of feedback, where a user can express her feature preferences by applying a series of directional critiques over the recommendations instead of providing specific preference values. Incremental Critiquing is a conversational recommender system that uses critiquing as a feedback to efficiently personalize products. The expectation is that in each cycle the system retrieves the products that best satisfy the user’s soft product preferences from a minimal information input. In this paper, we present a novel technique that increases retrieval quality based on a combination of compatibility and similarity scores. Under the hypothesis that a user learns Turing the recommendation process, we propose two novel exponential reinforcement learning approaches for compatibility that take into account both the instant at which the user makes a critique and the number of satisfied critiques. Moreover, we consider that the impact of features on the similarity differs according to the preferences manifested by the user. We propose a global weighting approach that uses a common weight for nearest cases in order to focus on groups of relevant products. We show that our methodology significantly improves recommendation efficiency in four data sets of different sizes in terms of session length in comparison with state-of-the-art approaches. Moreover, our recommender shows higher robustness against noisy user data when compared to classical approaches
|
|
|
|
Jon Almazan, Ernest Valveny, & Alicia Fornes. (2011). Deforming the Blurred Shape Model for Shape Description and Recognition. In Jordi Vitria, Joao Miguel Raposo, & Mario Hernandez (Eds.), 5th Iberian Conference on Pattern Recognition and Image Analysis (Vol. 6669, pp. 1–8). LNCS. Berlin: Springer-Verlag.
Abstract: This paper presents a new model for the description and recognition of distorted shapes, where the image is represented by a pixel density distribution based on the Blurred Shape Model combined with a non-linear image deformation model. This leads to an adaptive structure able to capture elastic deformations in shapes. This method has been evaluated using thee different datasets where deformations are present, showing the robustness and good performance of the new model. Moreover, we show that incorporating deformation and flexibility, the new model outperforms the BSM approach when classifying shapes with high variability of appearance.
|
|
|
|
Laura Igual, Joan Carles Soliva, Antonio Hernandez, Sergio Escalera, Xavier Jimenez, Oscar Vilarroya, et al. (2011). A fully-automatic caudate nucleus segmentation of brain MRI: Application in volumetric analysis of pediatric attention-deficit/hyperactivity disorder. BEO - BioMedical Engineering Online, 10(105), 1–23.
Abstract: Background
Accurate automatic segmentation of the caudate nucleus in magnetic resonance images (MRI) of the brain is of great interest in the analysis of developmental disorders. Segmentation methods based on a single atlas or on multiple atlases have been shown to suitably localize caudate structure. However, the atlas prior information may not represent the structure of interest correctly. It may therefore be useful to introduce a more flexible technique for accurate segmentations.
Method
We present Cau-dateCut: a new fully-automatic method of segmenting the caudate nucleus in MRI. CaudateCut combines an atlas-based segmentation strategy with the Graph Cut energy-minimization framework. We adapt the Graph Cut model to make it suitable for segmenting small, low-contrast structures, such as the caudate nucleus, by defining new energy function data and boundary potentials. In particular, we exploit information concerning the intensity and geometry, and we add supervised energies based on contextual brain structures. Furthermore, we reinforce boundary detection using a new multi-scale edgeness measure.
Results
We apply the novel CaudateCut method to the segmentation of the caudate nucleus to a new set of 39 pediatric attention-deficit/hyperactivity disorder (ADHD) patients and 40 control children, as well as to a public database of 18 subjects. We evaluate the quality of the segmentation using several volumetric and voxel by voxel measures. Our results show improved performance in terms of segmentation compared to state-of-the-art approaches, obtaining a mean overlap of 80.75%. Moreover, we present a quantitative volumetric analysis of caudate abnormalities in pediatric ADHD, the results of which show strong correlation with expert manual analysis.
Conclusion
CaudateCut generates segmentation results that are comparable to gold-standard segmentations and which are reliable in the analysis of differentiating neuroanatomical abnormalities between healthy controls and pediatric ADHD.
Keywords: Brain caudate nucleus; segmentation; MRI; atlas-based strategy; Graph Cut framework
|
|
|
|
Jaime Moreno, & Xavier Otazu. (2011). Image compression algorithm based on Hilbert scanning of embedded quadTrees: an introduction of the Hi-SET coder. In IEEE International Conference on Multimedia and Expo (pp. 1–6).
Abstract: In this work we present an effective and computationally simple algorithm for image compression based on Hilbert Scanning of Embedded quadTrees (Hi-SET). It allows to represent an image as an embedded bitstream along a fractal function. Embedding is an important feature of modern image compression algorithms, in this way Salomon in [1, pg. 614] cite that another feature and perhaps a unique one is the fact of achieving the best quality for the number of bits input by the decoder at any point during the decoding. Hi-SET possesses also this latter feature. Furthermore, the coder is based on a quadtree partition strategy, that applied to image transformation structures such as discrete cosine or wavelet transform allows to obtain an energy clustering both in frequency and space. The coding algorithm is composed of three general steps, using just a list of significant pixels. The implementation of the proposed coder is developed for gray-scale and color image compression. Hi-SET compressed images are, on average, 6.20dB better than the ones obtained by other compression techniques based on the Hilbert scanning. Moreover, Hi-SET improves the image quality in 1.39dB and 1.00dB in gray-scale and color compression, respectively, when compared with JPEG2000 coder.
|
|
|
|
David Roche, Debora Gil, & Jesus Giraldo. (2011). Using statistical inference for designing termination conditions ensuring convergence of Evolutionary Algorithms. In 11th European Conference on Artificial Life.
Abstract: A main challenge in Evolutionary Algorithms (EAs) is determining a termination condition ensuring stabilization close to the optimum in real-world applications. Although for known test functions distribution-based quantities are good candidates (as far as suitable parameters are used), in real-world problems an open question still remains unsolved. How can we estimate an upper-bound for the termination condition value ensuring a given accuracy for the (unknown) EA solution?
We claim that the termination problem would be fully solved if we defined a quantity (depending only on the EA output) behaving like the solution accuracy. The open question would be, then, satisfactorily answered if we had a model relating both quantities, since accuracy could be predicted from the alternative quantity. We present a statistical inference framework addressing two topics: checking the correlation between the two quantities and defining a regression model for predicting (at a given confidence level) accuracy values from the EA output.
|
|
|
|
Ferran Poveda, Debora Gil, Albert Andaluz, & Enric Marti. (2011). Multiscale Tractography for Representing Heart Muscular Architecture. In In MICCAI 2011 Workshop on Computational Diffusion MRI.
Abstract: Deep understanding of myocardial structure of the heart would unravel crucial knowledge for clinical and medical procedures. Although the muscular architecture of the heart has been debated by countless researchers, the controversy is still alive. Diffusion Tensor MRI, DT-MRI, is a unique imaging technique for computational validation of the muscular structure of the heart. By the complex arrangement of myocites, existing techniques can not provide comprehensive descriptions of the global muscular architecture. In this paper we introduce a multiresolution reconstruction technique based on DT-MRI streamlining for simplified global myocardial model generation. Our reconstructions can restore the most complex myocardial structures and indicate a global helical organization
|
|
|
|
Debora Gil, Agnes Borras, Manuel Ballester, Francesc Carreras, Ruth Aris, Manuel Vazquez, et al. (2011). MIOCARDIA: Integrating cardiac function and muscular architecture for a better diagnosis. In Association for Computing Machinery (Ed.), 14th International Symposium on Applied Sciences in Biomedical and Communication Technologies. Barcelona, Spain.
Abstract: Deep understanding of myocardial structure of the heart would unravel crucial knowledge for clinical and medical procedures. The MIOCARDIA project is a multidisciplinary project in cooperation with l'Hospital de la Santa Creu i de Sant Pau, Clinica la Creu Blanca and Barcelona Supercomputing Center. The ultimate goal of this project is defining a computational model of the myocardium. The model takes into account the deep interrelation between the anatomy and the mechanics of the heart. The paper explains the workflow of the MIOCARDIA project. It also introduces a multiresolution reconstruction technique based on DT-MRI streamlining for simplified global myocardial model generation. Our reconstructions can restore the most complex myocardial structures and provides evidences of a global helical organization.
|
|
|
|
Panagiota Spyridonos, Fernando Vilariño, Jordi Vitria, Petia Radeva, Fernando Azpiroz, & Juan Malagelada. (2011). Device, system and method for automatic detection of contractile activity in an image frame.
Abstract: A device, system and method for automatic detection of contractile activity of a body lumen in an image frame is provided, wherein image frames during contractile activity are captured and/or image frames including contractile activity are automatically detected, such as through pattern recognition and/or feature extraction to trace image frames including contractions, e.g., with wrinkle patterns. A manual procedure of annotation of contractions, e.g. tonic contractions in capsule endoscopy, may consist of the visualization of the whole video by a specialist, and the labeling of the contraction frames. Embodiments of the present invention may be suitable for implementation in an in vivo imaging system.
|
|
|
|
Gerard Lacey, & Fernando Vilariño. (2011). Endoscopy system with motion sensors.
Abstract: An endoscopy system (1) comprises an endoscope (2) with a camera (3) at its tip. The endoscope extends through an endoscope guide (4) for guiding movement of the endoscope and for measurement of its movement as it enters the body. The guide (4) comprises a generally conical body (5) having a through passage (105) through which the endoscope (2) extends. A motion sensor comprises an optical transmitter (7) and a detector (8) mounted alongside the passage (105) to measure the insertion-withdrawal linear motion and also rotation of the endoscope by the endoscopist's hand. The system (1) also comprises a flexure controller (10) having wheels operated by the endoscopist. The camera (3), the motion sensor (7/8), and the flexure controller (10) are all connected to a processor (11) which feeds a display.
|
|
|
|
Jordi Vitria, Joao Sanchez, Miguel Raposo, & Mario Hernandez. (2011). Pattern Recognition and Image Analysis (J. Vitrià, J. Sanchez, M. Raposo, & M. Hernandez, Eds.) (Vol. 6669). Berlin: Springer-Verlag.
|
|
|
|
Antonio Hernandez, Carlo Gatta, Laura Igual, Sergio Escalera, & Petia Radeva. (2011). Automatic Angiography Segmentation Based on Improved Graph-cut. In Jornada TIC Salut Girona.
|
|
|
|
Laura Igual, Antonio Hernandez, Sergio Escalera, Miguel Reyes, Josep Moya, Joan Carles Soliva, et al. (2011). Automatic Techniques for Studying Attention-Deficit/Hyperactivity Disorder. In Jornada TIC Salut Girona.
|
|
|
|
David Vazquez, Antonio Lopez, Daniel Ponsa, & Javier Marin. (2011). Cool world: domain adaptation of virtual and real worlds for human detection using active learning. In NIPS Domain Adaptation Workshop: Theory and Application. Granada, Spain.
Abstract: Image based human detection is of paramount interest for different applications. The most promising human detectors rely on discriminatively learnt classifiers, i.e., trained with labelled samples. However, labelling is a manual intensive task, especially in cases like human detection where it is necessary to provide at least bounding boxes framing the humans for training. To overcome such problem, in Marin et al. we have proposed the use of a virtual world where the labels of the different objects are obtained automatically. This means that the human models (classifiers) are learnt using the appearance of realistic computer graphics. Later, these models are used for human detection in images of the real world. The results of this technique are surprisingly good. However, these are not always as good as the classical approach of training and testing with data coming from the same camera and the same type of scenario. Accordingly, in Vazquez et al. we cast the problem as one of supervised domain adaptation. In doing so, we assume that a small amount of manually labelled samples from real-world images is required. To collect these labelled samples we use an active learning technique. Thus, ultimately our human model is learnt by the combination of virtual- and real-world labelled samples which, to the best of our knowledge, was not done before. Here, we term such combined space cool world. In this extended abstract we summarize our proposal, and include quantitative results from Vazquez et al. showing its validity.
Keywords: Pedestrian Detection; Virtual; Domain Adaptation; Active Learning
|
|
|
|
Pierluigi Casale, Oriol Pujol, & Petia Radeva. (2011). User Verification From Walking Activity. First Steps Towards a Personal Verification System. In 1st International Conference on Pervasive and Embedded Computing and Communication Systems.
|
|
