Robert Benavente, C. Alejandro Parraga, & Maria Vanrell. (2010). La influencia del contexto en la definicion de las fronteras entre las categorias cromaticas. In 9th Congreso Nacional del Color (92–95).
Abstract: En este artículo presentamos los resultados de un experimento de categorización de color en el que las muestras se presentaron sobre un fondo multicolor (Mondrian) para simular los efectos del contexto. Los resultados se comparan con los de un experimento previo que, utilizando un paradigma diferente, determinó las fronteras sin tener en cuenta el contexto. El análisis de los resultados muestra que las fronteras obtenidas con el experimento en contexto presentan menos confusión que las obtenidas en el experimento sin contexto.
Keywords: Categorización del color; Apariencia del color; Influencia del contexto; Patrones de Mondrian; Modelos paramétricos
|
Enric Marti, Jaume Rocarias, Ricardo Toledo, & Aura Hernandez-Sabate. (2009). Caronte: plataforma Moodle con gestion flexible de grupos. Primeras experiencias en asignaturas de Ingenieria Informatica.
Abstract: En este artículo se presenta Caronte, entorno LMS (Learning Management System) basado en Moodle. Una característica importante del entorno es la gestión flexible de grupos en una asignatura. Entendemos por grupo un conjunto de alumnos que realizan un trabajo y uno de ellos entrega la actividad propuesta (práctica, encuesta, etc.) en representación del grupo. Hemos trabajado en la confección de estos grupos, implementando un sistema de inscripción por contraseña.
Caronte ofrece un conjunto de actividades basadas en este concepto de grupo: encuestas, tareas (entrega de trabajos o prácticas), encuestas de autoevaluación y cuestionarios, entre otras.
Basada en nuestra actividad de encuesta, hemos definido una actividad de Control, que permite un cierto feedback electrónico del profesor sobre la actividad de los alumnos.
Finalmente, se presenta un resumen de las experiencias de uso de Caronte sobre asignaturas de Ingeniería Informática en el curso 2007-08.
|
Enric Marti. (1996). Análisis de elementos gráficos en documentos. CVC UAB: Computer Vision Centre.
Abstract: En este texto se presenta un estudio sobre las t’ecnicas y aplicaciones de an’alisis de documentos, y más concretamente abordando la problem’atica del an’alisis de de entidades gr’aficas. El ’area de an’alisis de documentos tiene como objetivo la interpretaci’on de documentos impresos sobre papel por m’etodos computacionales, para obtener una descripci’on con un alto nivel de abstracci’on, que permita su posterior tratamiento y archivo por m’etodos inform’aticos. Este objetivo, junto a los trabajos realizados hasta el momento, le otorgan a esta ’area un amplio ’ambito de aplicaciones para la manipulaci’on y archivo de documentos sobre papel, que puede llegar a significar un salto cualitativo importante (del papel al disco ’optico) en el uso de soportes de informaci’on, debido a las importantes prestaciones de acceso y capacidad de archivo que suponen los medios inform’aticos. Generalmente los documentos son introducidos en los sistemas de an’alisis de documentos mediante scanner, obt...
|
Enric Marti, Debora Gil, Marc Vivet, & Carme Julia. (2008). Balance de cuatro años de experiencia en la implantación de la metodología de Aprendizaje Basado en Proyectos en la asignatura de Gráficos por Computador en ingeniería Informática.
Abstract: En este trabajo se presentan los resultados de la aplicación de la metodología del aprendizaje cooperativo a la docencia de dos asignaturas de programación en ingeniería informática. ‘Algoritmos y programación’ y ‘Lenguajes de programación’ son dos asignaturas complementarias que se organizan entorno a un proyecto común que engloba los contenidos de ambas asignaturas. En la docencia de una parte muy importante de estas asignaturas, la metodología del aprendizaje cooperativo se ha adaptado a sus características específicas. Como muestra de esta adaptación presentamos dos ejemplos de las actividades desarrolladas dentro de la docencia de estas asignaturas. Después de tres años de aplicación, el análisis a nivel cualitativo y cuantitativo de los resultados muestra que éstos son muy satisfactorios y que la aplicación del método cooperativo ha mejorado de forma considerable el rendimiento de los alumnos en ambas asignaturas.
Keywords: Aprendizaje cooperativo; aprendizaje basado en proyectos; experiencias docentes.
|
Josep Llados, Enric Marti, & Jordi Regincos. (1993). Interpretación de diseños a mano alzada como técnica de entrada a un sistema CAD en un ámbito de arquitectura. In III National Conference on Computer Graphics. Granada.
Abstract: En los últimos años, se ha introducido ámpliamente el uso de los sistemas CAD en dominios relacionados con la arquitectura. Dichos sistemas CAD son muy útiles para el arquitecto en el diseño de planos de plantas de edificios. Sin embargo, la utilización eficiente de un CAD requiere un tiempo de aprendizaje, en especial, en la etapa de creación y edición del diseño. Además, una vez familiarizado con un CAD, el arquitecto debe adaptarse a la simbología que éste le permite que, en algunos casos puede ser poco flexible.Con esta motivación, se propone una técnica alternativa de entrada de documentos en sistemas CAD. Dicha técnica se basa en el diseño del plano sobre papel mediante un dibujo lineal hecho a mano alzada a modo de boceto e introducido mediante scanner. Una vez interpretado este dibujo inicial e introducido en el CAD, el arquitecto sólo deber hacer sobre éste los retoques finales del documento.El sistema de entrada propuesto se compone de dos módulos principales: En primer lugar, la extracción de características (puntos característicos, rectas y arcos) de la imagen obtenida mediante scanner. En dicho módulo se aplican principalmente técnicas de procesamiento de imágenes obteniendo como resultado una representaci¢n del dibujo de entrada basada en grafos de atributos. El objetivo del segundo módulo es el de encontrar y reconocer las entidades integrantes del documento (puertas, mesas, etc.) en base a una biblioteca de símbolos definida en el sistema CAD. La implementación de dicho módulo se basa en técnicas de isomorfismo de grafos.El sistema propone una alternativa que permita, mediante el diseño a mano alzada, la introducción de la informaci¢n m s significativa del plano de forma rápida, sencilla y estandarizada por parte del usuario.
|
Mohamed Ali Souibgui, Alicia Fornes, Y.Kessentini, & C.Tudor. (2021). A Few-shot Learning Approach for Historical Encoded Manuscript Recognition. In 25th International Conference on Pattern Recognition (pp. 5413–5420).
Abstract: Encoded (or ciphered) manuscripts are a special type of historical documents that contain encrypted text. The automatic recognition of this kind of documents is challenging because: 1) the cipher alphabet changes from one document to another, 2) there is a lack of annotated corpus for training and 3) touching symbols make the symbol segmentation difficult and complex. To overcome these difficulties, we propose a novel method for handwritten ciphers recognition based on few-shot object detection. Our method first detects all symbols of a given alphabet in a line image, and then a decoding step maps the symbol similarity scores to the final sequence of transcribed symbols. By training on synthetic data, we show that the proposed architecture is able to recognize handwritten ciphers with unseen alphabets. In addition, if few labeled pages with the same alphabet are used for fine tuning, our method surpasses existing unsupervised and supervised HTR methods for ciphers recognition.
|
Lluis Gomez, Y. Patel, Marçal Rusiñol, C.V. Jawahar, & Dimosthenis Karatzas. (2017). Self‐supervised learning of visual features through embedding images into text topic spaces. In 30th IEEE Conference on Computer Vision and Pattern Recognition.
Abstract: End-to-end training from scratch of current deep architectures for new computer vision problems would require Imagenet-scale datasets, and this is not always possible. In this paper we present a method that is able to take advantage of freely available multi-modal content to train computer vision algorithms without human supervision. We put forward the idea of performing self-supervised learning of visual features by mining a large scale corpus of multi-modal (text and image) documents. We show that discriminative visual features can be learnt efficiently by training a CNN to predict the semantic context in which a particular image is more probable to appear as an illustration. For this we leverage the hidden semantic structures discovered in the text corpus with a well-known topic modeling technique. Our experiments demonstrate state of the art performance in image classification, object detection, and multi-modal retrieval compared to recent self-supervised or natural-supervised approaches.
|
Debora Gil, Rosa Maria Ortiz, Carles Sanchez, & Antoni Rosell. (2018). Objective endoscopic measurements of central airway stenosis. A pilot study. RES - Respiration, 95, 63–69.
Abstract: Endoscopic estimation of the degree of stenosis in central airway obstruction is subjective and highly variable. Objective: To determine the benefits of using SENSA (System for Endoscopic Stenosis Assessment), an image-based computational software, for obtaining objective stenosis index (SI) measurements among a group of expert bronchoscopists and general pulmonologists. Methods: A total of 7 expert bronchoscopists and 7 general pulmonologists were enrolled to validate SENSA usage. The SI obtained by the physicians and by SENSA were compared with a reference SI to set their precision in SI computation. We used SENSA to efficiently obtain this reference SI in 11 selected cases of benign stenosis. A Web platform with three user-friendly microtasks was designed to gather the data. The users had to visually estimate the SI from videos with and without contours of the normal and the obstructed area provided by SENSA. The users were able to modify the SENSA contours to define the reference SI using morphometric bronchoscopy. Results: Visual SI estimation accuracy was associated with neither bronchoscopic experience (p = 0.71) nor the contours of the normal and the obstructed area provided by the system (p = 0.13). The precision of the SI by SENSA was 97.7% (95% CI: 92.4-103.7), which is significantly better than the precision of the SI by visual estimation (p < 0.001), with an improvement by at least 15%. Conclusion: SENSA provides objective SI measurements with a precision of up to 99.5%, which can be calculated from any bronchoscope using an affordable scalable interface. Providing normal and obstructed contours on bronchoscopic videos does not improve physicians' visual estimation of the SI.
Keywords: Bronchoscopy; Tracheal stenosis; Airway stenosis; Computer-assisted analysis
|
Carles Sanchez. (2011). Tracheal ring detection in bronchoscopy (F. J. S. Debora Gil, Ed.) (Vol. 168). Master's thesis, , .
Abstract: Endoscopy is the process in which a camera is introduced inside a human.
Given that endoscopy provides realistic images (in contrast to other modalities) and allows non-invase minimal intervention procedures (which can aid in diagnosis and surgical interventions), its use has spreaded during last decades.
In this project we will focus on bronchoscopic procedures, during which the camera is introduced through the trachea in order to have a diagnostic of the patient. The diagnostic interventions are focused on: degree of stenosis (reduction in tracheal area), prosthesis or early diagnosis of tumors. In the first case, assessment of the luminal area and the calculation of the diameters of the tracheal rings are required. A main limitation is that all the process is done by hand,
which means that the doctor takes all the measurements and decisions just by looking at the screen. As far as we know there is no computational framework for helping the doctors in the diagnosis.
This project will consist of analysing bronchoscopic videos in order to extract useful information for the diagnostic of the degree of stenosis. In particular we will focus on segmentation of the tracheal rings. As a result of this project several strategies (for detecting tracheal rings) had been implemented in order to compare their performance.
Keywords: Bronchoscopy, tracheal ring, segmentation
|
Yaxing Wang, L. Zhang, & Joost Van de Weijer. (2016). Ensembles of generative adversarial networks. In 30th Annual Conference on Neural Information Processing Systems Worshops.
Abstract: Ensembles are a popular way to improve results of discriminative CNNs. The
combination of several networks trained starting from different initializations
improves results significantly. In this paper we investigate the usage of ensembles of GANs. The specific nature of GANs opens up several new ways to construct ensembles. The first one is based on the fact that in the minimax game which is played to optimize the GAN objective the generator network keeps on changing even after the network can be considered optimal. As such ensembles of GANs can be constructed based on the same network initialization but just taking models which have different amount of iterations. These so-called self ensembles are much faster to train than traditional ensembles. The second method, called cascade GANs, redirects part of the training data which is badly modeled by the first GAN to another GAN. In experiments on the CIFAR10 dataset we show that ensembles of GANs obtain model probability distributions which better model the data distribution. In addition, we show that these improved results can be obtained at little additional computational cost.
|
Jose M. Armingol, Jorge Alfonso, Nourdine Aliane, Miguel Clavijo, Sergio Campos-Cordobes, Arturo de la Escalera, et al. (2018). Environmental Perception for Intelligent Vehicles. In Intelligent Vehicles. Enabling Technologies and Future Developments (23–101).
Abstract: Environmental perception represents, because of its complexity, a challenge for Intelligent Transport Systems due to the great variety of situations and different elements that can happen in road environments and that must be faced by these systems. In connection with this, so far there are a variety of solutions as regards sensors and methods, so the results of precision, complexity, cost, or computational load obtained by these works are different. In this chapter some systems based on computer vision and laser techniques are presented. Fusion methods are also introduced in order to provide advanced and reliable perception systems.
Keywords: Computer vision; laser techniques; data fusion; advanced driver assistance systems; traffic monitoring systems; intelligent vehicles
|
Miguel Angel Bautista, Oriol Pujol, Xavier Baro, & Sergio Escalera. (2011). Introducing the Separability Matrix for Error Correcting Output Codes Coding. In Carlo Sansone, Josef Kittler, & Fabio Roli (Eds.), 10th International conference on Multiple Classifier Systems (Vol. 6713, pp. 227–236). LNCS. Springer-Verlag Berlin Heidelberg.
Abstract: Error Correcting Output Codes (ECOC) have demonstrate to be a powerful tool for treating multi-class problems. Nevertheless, predefined ECOC designs may not benefit from Error-correcting principles for particular multi-class data. In this paper, we introduce the Separability matrix as a tool to study and enhance designs for ECOC coding. In addition, a novel problem-dependent coding design based on the Separability matrix is tested over a wide set of challenging multi-class problems, obtaining very satisfactory results.
|
Miguel Angel Bautista, Oriol Pujol, Xavier Baro, & Sergio Escalera. (2011). Introducing the Separability Matrix for Error Correcting Output Codes Coding. In Carlo Sansone, Josef Kittler, & Fabio Roli (Eds.), 10th International Conference on Multiple Classifier Systems (Vol. 6713, pp. 227–236). LNCS. Springer-Verlag Berlin, Heidelberg.
Abstract: Error Correcting Output Codes (ECOC) have demonstrate to be a powerful tool for treating multi-class problems. Nevertheless, predefined ECOC designs may not benefit from Error-correcting principles for particular multi-class data. In this paper, we introduce the Separability matrix as a tool to study and enhance designs for ECOC coding. In addition, a novel problem-dependent coding design based on the Separability matrix is tested over a wide set of challenging multi-class problems, obtaining very satisfactory results.
|
Miguel Angel Bautista, Oriol Pujol, Fernando De la Torre, & Sergio Escalera. (2018). Error-Correcting Factorization. TPAMI - IEEE Transactions on Pattern Analysis and Machine Intelligence, 40, 2388–2401.
Abstract: Error Correcting Output Codes (ECOC) is a successful technique in multi-class classification, which is a core problem in Pattern Recognition and Machine Learning. A major advantage of ECOC over other methods is that the multi- class problem is decoupled into a set of binary problems that are solved independently. However, literature defines a general error-correcting capability for ECOCs without analyzing how it distributes among classes, hindering a deeper analysis of pair-wise error-correction. To address these limitations this paper proposes an Error-Correcting Factorization (ECF) method, our contribution is three fold: (I) We propose a novel representation of the error-correction capability, called the design matrix, that enables us to build an ECOC on the basis of allocating correction to pairs of classes. (II) We derive the optimal code length of an ECOC using rank properties of the design matrix. (III) ECF is formulated as a discrete optimization problem, and a relaxed solution is found using an efficient constrained block coordinate descent approach. (IV) Enabled by the flexibility introduced with the design matrix we propose to allocate the error-correction on classes that are prone to confusion. Experimental results in several databases show that when allocating the error-correction to confusable classes ECF outperforms state-of-the-art approaches.
|
Sergio Escalera, Oriol Pujol, & Petia Radeva. (2009). Separability of Ternary Codes for Sparse Designs of Error-Correcting Output Codes. PRL - Pattern Recognition Letters, 30(3), 285–297.
Abstract: Error Correcting Output Codes (ECOC) represent a successful framework to deal with multi-class categorization problems based on combining binary classifiers. In this paper, we present a new formulation of the ternary ECOC distance and the error-correcting capabilities in the ternary ECOC framework. Based on the new measure, we stress on how to design coding matrices preventing codification ambiguity and propose a new Sparse Random coding matrix with ternary distance maximization. The results on the UCI Repository and in a real speed traffic categorization problem show that when the coding design satisfies the new ternary measures, significant performance improvement is obtained independently of the decoding strategy applied.
|
