Antonio Esteban Lansaque. (2014). 3D reconstruction and recognition using structured ligth (Vol. 179). Master's thesis, , .
Abstract: This work covers the problem of 3D reconstruction, recognition and 6DOF pose estimation. The goal of this project is to reconstruct a 3D scene and to align an object model of the industrial pieces onto the reconstructed scene. The reconstruction algorithm is based on stereo techniques and the recognition algorithm is based on SHOT descriptors computed on a set of uniform keypoints. Correspondences are used to estimate a first 6DOF transformation that maps the model onto the scene and then ICP algorithm is used to refine the transformation. In order to check the effectiveness of the proposed algorithm, several experiments were performed. These experiments were conducted on a lab environment in order to get results under the same conditions in all of them. Although obtained results are not real time results, the proposed algorithm ends up with high rates of object recognition.
|
Ricard Balague. (2014). Exploring the combination of color cues for intrinsic image decomposition (Vol. 178). Master's thesis, , .
Abstract: Intrinsic image decomposition is a challenging problem that consists in separating an image into its physical characteristics: reflectance and shading. This problem can be solved in different ways, but most methods have combined information from several visual cues. In this work we describe an extension of an existing method proposed by Serra et al. which considers two color descriptors and combines them by means of a Markov Random Field. We analyze in depth the weak points of the method and we explore more possibilities to use in both descriptors. The proposed extension depends on the combination of the cues considered to overcome some of the limitations of the original method. Our approach is tested on the MIT dataset and Beigpour et al. dataset, which contain images of real objects acquired under controlled conditions and synthetic images respectively, with their corresponding ground truth.
|
Cristhian A. Aguilera-Carrasco. (2014). Evaluation of feature detectors and descriptors in VISIBLE-LWIR cross-spectral imaging (Vol. 177). Master's thesis, , .
Abstract: This thesis evaluates the performance of different state-of-art feature detectors and descriptors algorithms in the Visible-LWIR cross-spectral scenario. The focus is to determine if current detector and descriptor algorithms can be used to match features between the LWIR spectrum and the visible spectrum in applications such as, visual odometry, object recognition, image registration and stereo vision. An outdoor cross-spectral dataset was created to evaluate the suitability of the different algorithms. The results
show that the tested algorithms are not suitable to the task of matching features across different spectra. The repeatability ratio was smaller than the 30 percent in the best case and in general matched features were not accurate located. Additionally, these results also suggest that is necessary to create new algorithms that take into account the nature of the different spectra, describing characteristics that exist in both spectra such as discontinuities.
Keywords: Multi-spectral; Cross-spectral; Visible-LWIR imaging; Multimodal.
|
Francesco Brughi. (2013). Artistic Heritage Motive Retrieval: an Explorative Study (Vol. 176). Master's thesis, , .
|
Ivet Rafegas. (2013). Exploring Low-Level Vision Models. Case Study: Saliency Prediction (Vol. 175). Master's thesis, , .
|
Nuria Cirera. (2012). Recognition of Handwritten Historical Documents (Vol. 174). Master's thesis, , .
|
Lluis Gomez. (2012). Perceptual Organization for Text Extraction in Natural Scenes (Vol. 173). Master's thesis, , .
|
Onur Ferhat. (2012). Eye-Tracking with Webcam-Based Setups: Implementation of a Real-Time System and an Analysis of Factors Affecting Performance (Fernando Vilariño, Ed.) (Vol. 172). Master's thesis, , .
Abstract: In the recent years commercial eye-tracking hardware has become more common, with the introduction of new models from several brands that have better performance and easier setup procedures. A cause and at the same time a result of this phenomenon is the popularity of eye-tracking research directed at marketing, accessibility and usability, among others.
One problem with these hardware components is scalability, because both the price and the necessary expertise to operate them makes it practically impossible in the large scale. In this work, we analyze the feasibility of a software eye-tracking system based on a single, ordinary webcam. Our aim is to discover the limits of such a system and to see whether it provides acceptable performances.
The significance of this setup is that it is the most common setup found in consumer environments, off-the-shelf electronic devices such as laptops, mobile phones and tablet computers. As no special equipment such as infrared lights, mirrors or zoom lenses are used; setting up and calibrating the system is easier compared to other approaches using these components.
Our work is based on the open source application Opengazer, which provides a good starting point for our contributions. We propose several improvements in order to push the system's performance further and make it feasible as a robust, real-time device. Then we carry out an elaborate experiment involving 18 human subjects and 4 different system setups. Finally, we give an analysis of the results and discuss the effects of setup changes, subject differences and modifications in the software.
Keywords: Computer vision, eye-tracking, gaussian process, feature selection, optical flow
|
Xu Hu. (2012). Real-Time Part Based Models for Object Detection (Vol. 171). Master's thesis, , .
|
German Ros. (2012). Visual SLAM for Driverless Cars: An Initial Survey (Vol. 170). Master's thesis, , .
|
Maria del Camp Davesa. (2011). Human action categorization in image sequences (Vol. 169). Master's thesis, , .
|
Carles Sanchez. (2011). Tracheal ring detection in bronchoscopy (F. J. S. Debora Gil, Ed.) (Vol. 168). Master's thesis, , .
Abstract: Endoscopy is the process in which a camera is introduced inside a human.
Given that endoscopy provides realistic images (in contrast to other modalities) and allows non-invase minimal intervention procedures (which can aid in diagnosis and surgical interventions), its use has spreaded during last decades.
In this project we will focus on bronchoscopic procedures, during which the camera is introduced through the trachea in order to have a diagnostic of the patient. The diagnostic interventions are focused on: degree of stenosis (reduction in tracheal area), prosthesis or early diagnosis of tumors. In the first case, assessment of the luminal area and the calculation of the diameters of the tracheal rings are required. A main limitation is that all the process is done by hand,
which means that the doctor takes all the measurements and decisions just by looking at the screen. As far as we know there is no computational framework for helping the doctors in the diagnosis.
This project will consist of analysing bronchoscopic videos in order to extract useful information for the diagnostic of the degree of stenosis. In particular we will focus on segmentation of the tracheal rings. As a result of this project several strategies (for detecting tracheal rings) had been implemented in order to compare their performance.
Keywords: Bronchoscopy, tracheal ring, segmentation
|
Yainuvis Socarras. (2011). Image segmentation for improving pedestrian detection (Vol. 167). Master's thesis, , .
|
Alejandro Gonzalez Alzate. (2011). Evaluation of spatiotemporal descriptors for pedestrian detection in video sequences (Vol. 166). Master's thesis, , .
|
Joan M. Nuñez. (2011). Computer vision techniques for characterization of finger joints in X-ray image (Dr. Fernando Vilariño and Dra. Debora Gil, Ed.) (Vol. 165). Master's thesis, , .
Abstract: Rheumatoid arthritis (RA) is an autoimmune inflammatory type of arthritis which mainly affects hands on its first stages. Though it is a chronic disease and there is no cure for it, treatments require an accurate assessment of illness evolution. Such assessment is based on evaluation of hand X-ray images by using one of the several available semi-quantitative methods. This task requires highly trained medical personnel. That is why the automation of the assessment would allow professionals to save time and effort. Two stages are involved in this task. Firstly, the joint detection, afterwards, the joint characterization. Unlike the little existing previous work, this contribution clearly separates those two stages and sets the foundations of a modular assessment system focusing on the characterization stage. A hand joint dataset is created and an accurate data analysis is achieved in order to identify relevant features. Since the sclerosis and the lower bone were decided to be the most important features, different computer vision techniques were used in order to develop a detector system for both of them. Joint space width measures are provided and their correlation with Sharp-Van der Heijde is verified
Keywords: Rheumatoid arthritis, X-ray, Sharp Van der Heijde, joint characterization, sclerosis detection, bone detection, edge, ridge
|