|
Jose Seabra, F. Javier Sanchez, Francesco Ciompi, & Petia Radeva. (2010). Ultrasonographic Plaque Characterization using a Rayleigh Mixture Model. In 7th IEEE International Symposium on Biomedical Imaging (1–4).
Abstract: From Nano to Macro
A correct modelling of tissue morphology is determinant for the identification of vulnerable plaques. This paper aims at describing the plaque composition by means of a Rayleigh Mixture Model applied to ultrasonic data. The effectiveness of using a mixture of distributions is established through synthetic and real ultrasonic data samples. Furthermore, the proposed mixture model is used in a plaque classification problem in Intravascular Ultrasound (IVUS) images of coronary plaques. A classifier tested on a set of 67 in-vitro plaques, yields an overall accuracy of 86% and sensitivity of 92%, 94% and 82%, for fibrotic, calcified and lipidic tissues, respectively. These results strongly suggest that different plaques types can be distinguished by means of the coefficients and Rayleigh parameters of the mixture distribution.
|
|
|
Herve Locteau, Sebastien Mace, Ernest Valveny, & Salvatore Tabbone. (2010). Extraction des pieces de un plan de habitation. In Colloque Internacional Francophone de l´Ecrit et le Document (1–12).
Abstract: In this article, a method to extract the rooms of an architectural floor plan image is described. We first present a line detection algorithm to extract long lines in the image. Those lines are analyzed to identify the existing walls. From this point, room extraction can be seen as a classical segmentation task for which each region corresponds to a room. The chosen resolution strategy consists in recursively decomposing the image until getting nearly convex regions. The notion of convexity is difficult to quantify, and the selection of separation lines can also be rough. Thus, we take advantage of knowledge associated to architectural floor plans in order to obtain mainly rectangular rooms. Preliminary tests on a set of real documents show promising results.
|
|
|
Xavier Otazu, C. Alejandro Parraga, & Maria Vanrell. (2010). Towards a unified chromatic inducction model. VSS - Journal of Vision, 10(12:5), 1–24.
Abstract: In a previous work (X. Otazu, M. Vanrell, & C. A. Párraga, 2008b), we showed how several brightness induction effects can be predicted using a simple multiresolution wavelet model (BIWaM). Here we present a new model for chromatic induction processes (termed Chromatic Induction Wavelet Model or CIWaM), which is also implemented on a multiresolution framework and based on similar assumptions related to the spatial frequency and the contrast surround energy of the stimulus. The CIWaM can be interpreted as a very simple extension of the BIWaM to the chromatic channels, which in our case are defined in the MacLeod-Boynton (lsY) color space. This new model allows us to unify both chromatic assimilation and chromatic contrast effects in a single mathematical formulation. The predictions of the CIWaM were tested by means of several color and brightness induction experiments, which showed an acceptable agreement between model predictions and psychophysical data.
Keywords: Visual system; Color induction; Wavelet transform
|
|
|
Antonio Hernandez, Carlo Gatta, Petia Radeva, Laura Igual, R. Letaz, & Sergio Escalera. (2010). Automatic Vessel Segmentation For Angiography and CT Registration. In Medical Image Computing in Catalunya: Graduate Student Workshop (1–2).
|
|
|
Paula Fritzsche, C.Roig, Ana Ripoll, Emilio Luque, & Aura Hernandez-Sabate. (2006). A Performance Prediction Methodology for Data-dependent Parallel Applications. In Proceedings of the IEEE International Conference on Cluster Computing (pp. 1–8).
Abstract: The increase in the use of parallel distributed architectures in order to solve large-scale scientific problems has generated the need for performance prediction for both deterministic applications and non-deterministic applications. In particular, the performance prediction of data dependent programs is an extremely challenging problem because for a specific issue the input datasets may cause different execution times. Generally, a parallel application is characterized as a collection of tasks and their interrelations. If the application is time-critical it is not enough to work with only one value per task, and consequently knowledge of the distribution of task execution times is crucial. The development of a new prediction methodology to estimate the performance of data-dependent parallel applications is the primary target of this study. This approach makes it possible to evaluate the parallel performance of an application without the need of implementation. A real data-dependent arterial structure detection application model is used to apply the methodology proposed. The predicted times obtained using the new methodology for genuine datasets are compared with predicted times that arise from using only one execution value per task. Finally, the experimental study shows that the new methodology generates more precise predictions.
|
|
|
Jaume Garcia, Francesc Carreras, Sandra Pujades, & Debora Gil. (2008). Regional motion patterns for the Left Ventricle function assessment. In Proc. 19th Int. Conf. Pattern Recognition ICPR 2008 (pp. 1–4).
Abstract: Regional scores (e.g. strain, perfusion) of the Left Ventricle (LV) functionality are playing an increasing role in the diagnosis of cardiac diseases. A main limitation is the lack of normality models for complementary scores oriented to assessment of the LV integrity. This paper introduces an original framework based on a parametrization of the LV domain, which allows comparison across subjects of local physiological measures of different nature. We compute regional normality patterns in a feature space characterizing the LV function. We show the consistency of the model for the regional motion on healthy and hypokinetic pathological cases
|
|
|
Josep Llados, Ernest Valveny, Gemma Sanchez, & Enric Marti. (2003). A Case Study of Pattern Recognition: Symbol Recognition in Graphic Documentsa. In Proceedings of Pattern Recognition in Information Systems (pp. 1–13). ICEIS Press.
|
|
|
Enric Marti, Ferran Poveda, Antoni Gurgui, & Debora Gil. (2011). Aprendizaje Basado en Proyectos en Ingeniería Informática. Resultados y reflexiones de seis años de experiencia.
Abstract: In this workshop a 6 years experience in Project Based Learning (PBL) in Computer Graphics, Computer Engineering course at the Autonomous University of Barcelona (UAB) is presented. We use a Moodle environment suited to manage the documentation generated in PBL. The course is organized by means of two alternative routes: a classic itinerary of lectures and test-based evaluation and another with PBL. In the PBL itinerary we explain the organization in teamgroups, homework tutoring and monitoring and evaluation guidelines for students. We provide some of the work done by students, and the results of assessment surveys carried out to students during these years. We report the evolution of our PBL itinerary in terms of, both, organization and student surveys.
The workshop aims at discussing about on the advantages and disadvantages of using these active methodologies in technical degrees such as computer engineering, in order to debate about the most suitable way of organizing PBL and assessing students learning rate.
|
|
|
H. Emrah Tasli, Cevahir Çigla, Theo Gevers, & A. Aydin Alatan. (2013). Super pixel extraction via convexity induced boundary adaptation. In 14th IEEE International Conference on Multimedia and Expo (pp. 1–6).
Abstract: This study presents an efficient super-pixel extraction algorithm with major contributions to the state-of-the-art in terms of accuracy and computational complexity. Segmentation accuracy is improved through convexity constrained geodesic distance utilization; while computational efficiency is achieved by replacing complete region processing with boundary adaptation idea. Starting from the uniformly distributed rectangular equal-sized super-pixels, region boundaries are adapted to intensity edges iteratively by assigning boundary pixels to the most similar neighboring super-pixels. At each iteration, super-pixel regions are updated and hence progressively converging to compact pixel groups. Experimental results with state-of-the-art comparisons, validate the performance of the proposed technique in terms of both accuracy and speed.
|
|
|
Petia Radeva, Jordi Vitria, Fernando Vilariño, Panagiota Spyridonos, Fernando Azpiroz, Juan Malagelada, et al. (2009). Cascade analysis for intestinal contraction detection. US Patent Office.
Abstract: A method and system cascade analysisi for intestinal contraction detection is provided by extracting from image frames captured in-vivo. The method and system also relate to the detection of turbid liquids in intestinal tracts, to automatic detection of video image frames taken in the gastrointestinal tract including a field of view obstructed by turbid media, and more particulary, to extraction of image data obstructed by turbid media.
|
|
|
Maria Salamo, & Sergio Escalera. (2011). Increasing Retrieval Quality in Conversational Recommenders. TKDE - IEEE Transactions on Knowledge and Data Engineering, 99, 1.
Abstract: IF JCR CCIA 2.286 2009 24/103
JCR Impact Factor 2010: 1.851
A major task of research in conversational recommender systems is personalization. Critiquing is a common and powerful form of feedback, where a user can express her feature preferences by applying a series of directional critiques over the recommendations instead of providing specific preference values. Incremental Critiquing is a conversational recommender system that uses critiquing as a feedback to efficiently personalize products. The expectation is that in each cycle the system retrieves the products that best satisfy the user’s soft product preferences from a minimal information input. In this paper, we present a novel technique that increases retrieval quality based on a combination of compatibility and similarity scores. Under the hypothesis that a user learns Turing the recommendation process, we propose two novel exponential reinforcement learning approaches for compatibility that take into account both the instant at which the user makes a critique and the number of satisfied critiques. Moreover, we consider that the impact of features on the similarity differs according to the preferences manifested by the user. We propose a global weighting approach that uses a common weight for nearest cases in order to focus on groups of relevant products. We show that our methodology significantly improves recommendation efficiency in four data sets of different sizes in terms of session length in comparison with state-of-the-art approaches. Moreover, our recommender shows higher robustness against noisy user data when compared to classical approaches
|
|
|
Jon Almazan, Ernest Valveny, & Alicia Fornes. (2011). Deforming the Blurred Shape Model for Shape Description and Recognition. In Jordi Vitria, Joao Miguel Raposo, & Mario Hernandez (Eds.), 5th Iberian Conference on Pattern Recognition and Image Analysis (Vol. 6669, pp. 1–8). LNCS. Berlin: Springer-Verlag.
Abstract: This paper presents a new model for the description and recognition of distorted shapes, where the image is represented by a pixel density distribution based on the Blurred Shape Model combined with a non-linear image deformation model. This leads to an adaptive structure able to capture elastic deformations in shapes. This method has been evaluated using thee different datasets where deformations are present, showing the robustness and good performance of the new model. Moreover, we show that incorporating deformation and flexibility, the new model outperforms the BSM approach when classifying shapes with high variability of appearance.
|
|
|
S. Chanda, Umapada Pal, & Oriol Ramos Terrades. (2009). Word-Wise Thai and Roman Script Identification. TALIP - ACM Transactions on Asian Language Information Processing, 1–21.
Abstract: In some Thai documents, a single text line of a printed document page may contain words of both Thai and Roman scripts. For the Optical Character Recognition (OCR) of such a document page it is better to identify, at first, Thai and Roman script portions and then to use individual OCR systems of the respective scripts on these identified portions. In this article, an SVM-based method is proposed for identification of word-wise printed Roman and Thai scripts from a single line of a document page. Here, at first, the document is segmented into lines and then lines are segmented into character groups (words). In the proposed scheme, we identify the script of a character group combining different character features obtained from structural shape, profile behavior, component overlapping information, topological properties, and water reservoir concept, etc. Based on the experiment on 10,000 data (words) we obtained 99.62% script identification accuracy from the proposed scheme.
|
|
|
H. Chouaib, Oriol Ramos Terrades, Salvatore Tabbone, F. Cloppet, & N. Vincent. (2008). Feature Selection Combining Genetic Algorithm and Adaboost Classifiers. In 19th International Conference on Pattern Recognition (pp. 1–4).
|
|
|
Salvatore Tabbone, Oriol Ramos Terrades, & S. Barrat. (2008). Histogram of radon transform. A useful descriptor for shape retrieval. In 19th International Conference on Pattern Recognition (pp. 1–4).
|
|