|
|
Eduard Vazquez. (2011). Unsupervised image segmentation based on material reflectance description and saliency (Ramon Baldrich, Ed.). Ph.D. thesis, , .
Abstract: Image segmentations aims to partition an image into a set of non-overlapped regions, called segments. Despite the simplicity of the definition, image segmentation raises as a very complex problem in all its stages. The definition of segment is still unclear. When asking to a human to perform a segmentation, this person segments at different levels of abstraction. Some segments might be a single, well-defined texture whereas some others correspond with an object in the scene which might including multiple textures and colors. For this reason, segmentation is divided in bottom-up segmentation and top-down segmentation. Bottom up-segmentation is problem independent, that is, focused on general properties of the images such as textures or illumination. Top-down segmentation is a problem-dependent approach which looks for specific entities in the scene, such as known objects. This work is focused on bottom-up segmentation. Beginning from the analysis of the lacks of current methods, we propose an approach called RAD. Our approach overcomes the main shortcomings of those methods which use the physics of the light to perform the segmentation. RAD is a topological approach which describes a single-material reflectance. Afterwards, we cope with one of the main problems in image segmentation: non supervised adaptability to image content. To yield a non-supervised method, we use a model of saliency yet presented in this thesis. It computes the saliency of the chromatic transitions of an image by means of a statistical analysis of the images derivatives. This method of saliency is used to build our final approach of segmentation: spRAD. This method is a non-supervised segmentation approach. Our saliency approach has been validated with a psychophysical experiment as well as computationally, overcoming a state-of-the-art saliency method. spRAD also outperforms state-of-the-art segmentation techniques as results obtained with a widely-used segmentation dataset show
|
|
|
|
Santiago Segui. (2011). Contributions to the Diagnosis of Intestinal Motility by Automatic Image Analysis (Jordi Vitria, Ed.). Ph.D. thesis, Ediciones Graficas Rey, .
Abstract: In the early twenty first century Given Imaging Ltd. presented wireless capsule endoscopy (WCE) as a new technological breakthrough that allowed the visualization of
the intestine by using a small, swallowed camera. This small size device was received
with a high enthusiasm within the medical community, and until now, it is still one
of the medical devices with the highest use growth rate. WCE can be used as a novel
diagnostic tool that presents several clinical advantages, since it is non-invasive and
at the same time it provides, for the first time, a full picture of the small bowel morphology, contents and dynamics. Since its appearance, the WCE has been used to
detect several intestinal dysfunctions such as: polyps, ulcers and bleeding. However,
the visual analysis of WCE videos presents an important drawback: the long time
required by the physicians for proper video visualization. In this sense and regarding
to this limitation, the development of computer aided systems is required for the extensive use of WCE in the medical community.
The work presented in this thesis is a set of contributions for the automatic image
analysis and computer-aided diagnosis of intestinal motility disorders using WCE.
Until now, the diagnosis of small bowel motility dysfunctions was basically performed
by invasive techniques such as the manometry test, which can only be conducted at
some referral centers around the world owing to the complexity of the procedure and
the medial expertise required in the interpretation of the results.
Our contributions are divided in three main blocks:
1. Image analysis by computer vision techniques to detect events in the endoluminal WCE scene. Several methods have been proposed to detect visual events
such as: intestinal contractions, intestinal content, tunnel and wrinkles;
2. Machine learning techniques for the analysis and the manipulation of the data
from WCE. These methods have been proposed in order to overcome the problems that the analysis of WCE presents such as: video acquisition cost, unlabeled data and large number of data;
3. Two different systems for the computer-aided diagnosis of intestinal motility
disorders using WCE. The first system presents a fully automatic method that
aids at discriminating healthy subjects from patients with severe intestinal motor disorders like pseudo-obstruction or food intolerance. The second system presents another automatic method that models healthy subjects and discriminate them from mild intestinal motility patients.
|
|
|
|
Pierluigi Casale. (2011). Approximate Ensemble Methods for Physical Activity Recognition Applications (Oriol Pujol, & Petia Radeva, Eds.). Ph.D. thesis, Ediciones Graficas Rey, .
Abstract: The main interest of this thesis focuses on computational methodologies able to
reduce the degree of complexity of learning algorithms and its application to physical
activity recognition.
Random Projections will be used to reduce the computational complexity in Multiple Classifier Systems. A new boosting algorithm and a new one-class classification
methodology have been developed. In both cases, random projections are used for
reducing the dimensionality of the problem and for generating diversity, exploiting in
this way the benefits that ensembles of classifiers provide in terms of performances
and stability. Moreover, the new one-class classification methodology, based on an ensemble strategy able to approximate a multidimensional convex-hull, has been proved
to over-perform state-of-the-art one-class classification methodologies.
The practical focus of the thesis is towards Physical Activity Recognition. A new
hardware platform for wearable computing application has been developed and used
for collecting data of activities of daily living allowing to study the optimal features
set able to successful classify activities.
Based on the classification methodologies developed and the study conducted on
physical activity classification, a machine learning architecture capable to provide a
continuous authentication mechanism for mobile-devices users has been worked out,
as last part of the thesis. The system, based on a personalized classifier, states on
the analysis of the characteristic gait patterns typical of each individual ensuring an
unobtrusive and continuous authentication mechanism
|
|
|
|
Fahad Shahbaz Khan. (2011). Coloring bag-of-words based image representations (Joost Van de Weijer, & Maria Vanrell, Eds.). Ph.D. thesis, , .
Abstract: Put succinctly, the bag-of-words based image representation is the most successful approach for object and scene recognition. Within the bag-of-words framework the optimal fusion of multiple cues, such as shape, texture and color, still remains an active research domain. There exist two main approaches to combine color and shape information within the bag-of-words framework. The first approach called, early fusion, fuses color and shape at the feature level as a result of which a joint colorshape vocabulary is produced. The second approach, called late fusion, concatenates histogram representation of both color and shape, obtained independently. In the first part of this thesis, we analyze the theoretical implications of both early and late feature fusion. We demonstrate that both these approaches are suboptimal for a subset of object categories. Consequently, we propose a novel method for recognizing object categories when using multiple cues by separately processing the shape and color cues and combining them by modulating the shape features by category specific color attention. Color is used to compute bottom-up and top-down attention maps. Subsequently, the color attention maps are used to modulate the weights of the shape features. Shape features are given more weight in regions with higher attention and vice versa. The approach is tested on several benchmark object recognition data sets and the results clearly demonstrate the effectiveness of our proposed method. In the second part of the thesis, we investigate the problem of obtaining compact spatial pyramid representations for object and scene recognition. Spatial pyramids have been successfully applied to incorporate spatial information into bag-of-words based image representation. However, a major drawback of spatial pyramids is that it leads to high dimensional image representations. We present a novel framework for obtaining compact pyramid representation. The approach reduces the size of a high dimensional pyramid representation upto an order of magnitude without any significant reduction in accuracy. Moreover, we also investigate the optimal combination of multiple features such as color and shape within the context of our compact pyramid representation. Finally, we describe a novel technique to build discriminative visual words from multiple cues learned independently from training images. To this end, we use an information theoretic vocabulary compression technique to find discriminative combinations of visual cues and the resulting visual vocabulary is compact, has the cue binding property, and supports individual weighting of cues in the final image representation. The approach is tested on standard object recognition data sets. The results obtained clearly demonstrate the effectiveness of our approach.
|
|
|
|
Jürgen Brauer, Wenjuan Gong, Jordi Gonzalez, & Michael Arens. (2011). On the Effect of Temporal Information on Monocular 3D Human Pose Estimation. In 2nd IEEE International Workshop on Analysis and Retrieval of Tracked Events and Motion in Imagery Streams (pp. 906–913).
Abstract: We address the task of estimating 3D human poses from monocular camera sequences. Many works make use of multiple consecutive frames for the estimation of a 3D pose in a frame. Although such an approach should ease the pose estimation task substantially since multiple consecutive frames allow to solve for 2D projection ambiguities in principle, it has not yet been investigated systematically how much we can improve the 3D pose estimates when using multiple consecutive frames opposed to single frame information. In this paper we analyze the difference in quality of 3D pose estimates based on different numbers of consecutive frames from which 2D pose estimates are available. We validate the use of temporal information on two major different approaches for human pose estimation – modeling and learning approaches. The results of our experiments show that both learning and modeling approaches benefit from using multiple frames opposed to single frame input but that the benefit is small when the 2D pose estimates show a high quality in terms of precision.
|
|
|
|
Carles Sanchez. (2011). Tracheal ring detection in bronchoscopy (F. J. S. Debora Gil, Ed.) (Vol. 168). Master's thesis, , .
Abstract: Endoscopy is the process in which a camera is introduced inside a human.
Given that endoscopy provides realistic images (in contrast to other modalities) and allows non-invase minimal intervention procedures (which can aid in diagnosis and surgical interventions), its use has spreaded during last decades.
In this project we will focus on bronchoscopic procedures, during which the camera is introduced through the trachea in order to have a diagnostic of the patient. The diagnostic interventions are focused on: degree of stenosis (reduction in tracheal area), prosthesis or early diagnosis of tumors. In the first case, assessment of the luminal area and the calculation of the diameters of the tracheal rings are required. A main limitation is that all the process is done by hand,
which means that the doctor takes all the measurements and decisions just by looking at the screen. As far as we know there is no computational framework for helping the doctors in the diagnosis.
This project will consist of analysing bronchoscopic videos in order to extract useful information for the diagnostic of the degree of stenosis. In particular we will focus on segmentation of the tracheal rings. As a result of this project several strategies (for detecting tracheal rings) had been implemented in order to compare their performance.
Keywords: Bronchoscopy, tracheal ring, segmentation
|
|
|
|
G.D. Evangelidis, Ferran Diego, Joan Serrat, & Antonio Lopez. (2011). Slice Matching for Accurate Spatio-Temporal Alignment. In In ICCV Workshop on Visual Surveillance.
Abstract: Video synchronization and alignment is a rather recent topic in computer vision. It usually deals with the problem of aligning sequences recorded simultaneously by static, jointly- or independently-moving cameras. In this paper, we investigate the more difficult problem of matching videos captured at different times from independently-moving cameras, whose trajectories are approximately coincident or parallel. To this end, we propose a novel method that pixel-wise aligns videos and allows thus to automatically highlight their differences. This primarily aims at visual surveillance but the method can be adopted as is by other related video applications, like object transfer (augmented reality) or high dynamic range video. We build upon a slice matching scheme to first synchronize the sequences, while we develop a spatio-temporal alignment scheme to spatially register corresponding frames and refine the temporal mapping. We investigate the performance of the proposed method on videos recorded from vehicles driven along different types of roads and compare with related previous works.
Keywords: video alignment
|
|
|
|
Gemma Roig, Xavier Boix, F. de la Torre, Joan Serrat, & C. Vilella. (2011). Hierarchical CRF with product label spaces for parts-based Models. In IEEE Conference on Automatic Face and Gesture Recognition (pp. 657–664).
Abstract: Non-rigid object detection is a challenging an open research problem in computer vision. It is a critical part in many applications such as image search, surveillance, human-computer interaction or image auto-annotation. Most successful approaches to non-rigid object detection make use of part-based models. In particular, Conditional Random Fields (CRF) have been successfully embedded into a discriminative parts-based model framework due to its effectiveness for learning and inference (usually based on a tree structure). However, CRF-based approaches do not incorporate global constraints and only model pairwise interactions. This is especially important when modeling object classes that may have complex parts interactions (e.g. facial features or body articulations), because neglecting them yields an oversimplified model with suboptimal performance. To overcome this limitation, this paper proposes a novel hierarchical CRF (HCRF). The main contribution is to build a hierarchy of part combinations by extending the label set to a hierarchy of product label spaces. In order to keep the inference computation tractable, we propose an effective method to reduce the new label set. We test our method on two applications: facial feature detection on the Multi-PIE database and human pose estimation on the Buffy dataset.
Keywords: Shape; Computational modeling; Principal component analysis; Random variables; Color; Upper bound; Facial features
|
|
|
|
Fahad Shahbaz Khan, Joost Van de Weijer, Andrew Bagdanov, & Maria Vanrell. (2011). Portmanteau Vocabularies for Multi-Cue Image Representation. In 25th Annual Conference on Neural Information Processing Systems.
Abstract: We describe a novel technique for feature combination in the bag-of-words model of image classification. Our approach builds discriminative compound words from primitive cues learned independently from training images. Our main observation is that modeling joint-cue distributions independently is more statistically robust for typical classification problems than attempting to empirically estimate the dependent, joint-cue distribution directly. We use Information theoretic vocabulary compression to find discriminative combinations of cues and the resulting vocabulary of portmanteau words is compact, has the cue binding property, and supports individual weighting of cues in the final image representation. State-of-the-art results on both the Oxford Flower-102 and Caltech-UCSD Bird-200 datasets demonstrate the effectiveness of our technique compared to other, significantly more complex approaches to multi-cue image representation
|
|
|
|
Naila Murray, Sandra Skaff, Luca Marchesotti, & Florent Perronnin. (2011). Towards Automatic Concept Transfer. In Proceedings of the ACM SIGGRAPH/Eurographics Symposium on Non-Photorealistic Animation and Rendering (167.176). ACM Press.
Abstract: This paper introduces a novel approach to automatic concept transfer; examples of concepts are “romantic”, “earthy”, and “luscious”. The approach modifies the color content of an input image given only a concept specified by a user in natural language, thereby requiring minimal user input. This approach is particularly useful for users who are aware of the message they wish to convey in the transferred image while being unsure of the color combination needed to achieve the corresponding transfer. The user may adjust the intensity level of the concept transfer to his/her liking with a single parameter. The proposed approach uses a convex clustering algorithm, with a novel pruning mechanism, to automatically set the complexity of models of chromatic content. It also uses the Earth-Mover's Distance to compute a mapping between the models of the input image and the target chromatic concept. Results show that our approach yields transferred images which effectively represent concepts, as confirmed by a user study.
Keywords: chromatic modeling, color concepts, color transfer, concept transfer
|
|
|
|
Jordi Roca, C. Alejandro Parraga, & Maria Vanrell. (2011). Categorical Focal Colours are Structurally Invariant Under Illuminant Changes. In European Conference on Visual Perception (196). Perception 40.
Abstract: The visual system perceives the colour of surfaces approximately constant under changes of illumination. In this work, we investigate how stable is the perception of categorical \“focal\” colours and their interrelations with varying illuminants and simple chromatic backgrounds. It has been proposed that best examples of colour categories across languages cluster in small regions of the colour space and are restricted to a set of 11 basic terms (Kay and Regier, 2003 Proceedings of the National Academy of Sciences of the USA 100 9085\–9089). Following this, we developed a psychophysical paradigm that exploits the ability of subjects to reliably reproduce the most representative examples of each category, adjusting multiple test patches embedded in a coloured Mondrian. The experiment was run on a CRT monitor (inside a dark room) under various simulated illuminants. We modelled the recorded data for each subject and adapted state as a 3D interconnected structure (graph) in Lab space. The graph nodes were the subject\’s focal colours at each adaptation state. The model allowed us to get a better distance measure between focal structures under different illuminants. We found that perceptual focal structures tend to be preserved better than the structures of the physical \“ideal\” colours under illuminant changes.
|
|
|
|
Miguel Angel Bautista, Sergio Escalera, Xavier Baro, Oriol Pujol, Jordi Vitria, & Petia Radeva. (2011). On the Design of Low Redundancy Error-Correcting Output Codes. In Ensembles in Machine Learning Applications (Vol. 373, pp. 21–38). Springer Berlin Heidelberg.
Abstract: The classification of large number of object categories is a challenging trend in the Pattern Recognition field. In the literature, this is often addressed using an ensemble of classifiers . In this scope, the Error-Correcting Output Codes framework has demonstrated to be a powerful tool for combining classifiers. However, most of the state-of-the-art ECOC approaches use a linear or exponential number of classifiers, making the discrimination of a large number of classes unfeasible. In this paper, we explore and propose a compact design of ECOC in terms of the number of classifiers. Evolutionary computation is used for tuning the parameters of the classifiers and looking for the best compact ECOC code configuration. The results over several public UCI data sets and different multi-class Computer Vision problems show that the proposed methodology obtains comparable (even better) results than the state-of-the-art ECOC methodologies with far less number of dichotomizers.
|
|
|
|
Miguel Angel Bautista, Oriol Pujol, Xavier Baro, & Sergio Escalera. (2011). Introducing the Separability Matrix for Error Correcting Output Codes Coding. In Carlo Sansone, Josef Kittler, & Fabio Roli (Eds.), 10th International Conference on Multiple Classifier Systems (Vol. 6713, pp. 227–236). LNCS. Springer-Verlag Berlin, Heidelberg.
Abstract: Error Correcting Output Codes (ECOC) have demonstrate to be a powerful tool for treating multi-class problems. Nevertheless, predefined ECOC designs may not benefit from Error-correcting principles for particular multi-class data. In this paper, we introduce the Separability matrix as a tool to study and enhance designs for ECOC coding. In addition, a novel problem-dependent coding design based on the Separability matrix is tested over a wide set of challenging multi-class problems, obtaining very satisfactory results.
|
|
|
|
Ruth Aylett, Ginevra Castellano, Bogdan Raducanu, Ana Paiva, & Marc Hanheide. (2011). Long-term socially perceptive and interactive robot companions: challenges and future perspectives. In 13th International Conference on Multimodal Interaction (pp. 323–326). ACM.
Abstract: This paper gives a brief overview of the challenges for multi-model perception and generation applied to robot companions located in human social environments. It reviews the current position in both perception and generation and the immediate technical challenges and goes on to consider the extra issues raised by embodiment and social context. Finally, it briefly discusses the impact of systems that must function continually over months rather than just for a few hours.
Keywords: human-robot interaction, multimodal interaction, social robotics
|
|
|
|
Antonio Hernandez, Carlos Primo, & Sergio Escalera. (2011). Automatic user interaction correction via Multi-label Graph cuts. In In ICCV 2011 1st IEEE International Workshop on Human Interaction in Computer Vision HICV (pp. 1276–1281).
Abstract: Most applications in image segmentation requires from user interaction in order to achieve accurate results. However, user wants to achieve the desired segmentation accuracy reducing effort of manual labelling. In this work, we extend standard multi-label α-expansion Graph Cut algorithm so that it analyzes the interaction of the user in order to modify the object model and improve final segmentation of objects. The approach is inspired in the fact that fast user interactions may introduce some pixel errors confusing object and background. Our results with different degrees of user interaction and input errors show high performance of the proposed approach on a multi-label human limb segmentation problem compared with classical α-expansion algorithm.
|
|
