Debora Gil, Aura Hernandez-Sabate, David Castells, & Jordi Carrabina. (2017). CYBERH: Cyber-Physical Systems in Health for Personalized Assistance. In International Symposium on Symbolic and Numeric Algorithms for Scientific Computing.
Abstract: Assistance systems for e-Health applications have some specific requirements that demand of new methods for data gathering, analysis and modeling able to deal with SmallData:
1) systems should dynamically collect data from, both, the environment and the user to issue personalized recommendations; 2) data analysis should be able to tackle a limited number of samples prone to include non-informative data and possibly evolving in time due to changes in patient condition; 3) algorithms should run in real time with possibly limited computational resources and fluctuant internet access.
Electronic medical devices (and CyberPhysical devices in general) can enhance the process of data gathering and analysis in several ways: (i) acquiring simultaneously multiple sensors data instead of single magnitudes (ii) filtering data; (iii) providing real-time implementations condition by isolating tasks in individual processors of multiprocessors Systems-on-chip (MPSoC) platforms and (iv) combining information through sensor fusion
techniques.
Our approach focus on both aspects of the complementary role of CyberPhysical devices and analysis of SmallData in the process of personalized models building for e-Health applications. In particular, we will address the design of Cyber-Physical Systems in Health for Personalized Assistance (CyberHealth) in two specific application cases: 1) A Smart Assisted Driving System (SADs) for dynamical assessment of the driving capabilities of Mild Cognitive Impaired (MCI) people; 2) An Intelligent Operating Room (iOR) for improving the yield of bronchoscopic interventions for in-vivo lung cancer diagnosis.
|
Simone Balocco, Francesco Ciompi, Juan Rigla, Xavier Carrillo, J. Mauri, & Petia Radeva. (2017). Intra-Coronary Stent localization In Intravascular Ultrasound Sequences, A Preliminary Study. In International workshop on Computing and Visualization for Intravascular Imaging and Computer Assisted Stenting (CVII-STENT). LNCS.
Abstract: An intraluminal coronary stent is a metal scaold deployed in a stenotic artery during Percutaneous Coronary Intervention (PCI).
Intravascular Ultrasound (IVUS) is a catheter-based imaging technique generally used for assessing the correct placement of the stent. All the approaches proposed so far for the stent analysis only focused on the struts detection, while this paper proposes a novel approach to detect the boundaries and the position of the stent along the pullback.
The pipeline of the method requires the identi cation of the stable frames
of the sequence and the reliable detection of stent struts. Using this data,
a measure of likelihood for a frame to contain a stent is computed. Then,
a robust binary representation of the presence of the stent in the pullback
is obtained applying an iterative and multi-scale approximation of the signal to symbols using the SAX algorithm. Results obtained comparing the automatic results versus the manual annotation of two observers on 80 IVUS in-vivo sequences shows that the method approaches the inter-observer variability scores.
|
Pau Riba, Alicia Fornes, & Josep Llados. (2017). Towards the Alignment of Handwritten Music Scores. In Bart Lamiroy, & R Dueire Lins (Eds.), International Workshop on Graphics Recognition. GREC 2015.Graphic Recognition. Current Trends and Challenges (Vol. 9657, pp. 103–116). LNCS.
Abstract: It is very common to nd di erent versions of the same music work in archives of Opera Theaters. These di erences correspond to modi cations and annotations from the musicians. From the musicologist point of view, these variations are very interesting and deserve study.
This paper explores the alignment of music scores as a tool for automatically detecting the passages that contain such di erences. Given the diculties in the recognition of handwritten music scores, our goal is to align the music scores and at the same time, avoid the recognition of music elements as much as possible. After removing the sta lines, braces and ties, the bar lines are detected. Then, the bar units are described as a whole using the Blurred Shape Model. The bar units alignment is performed by using Dynamic Time Warping. The analysis of the alignment path is used to detect the variations in the music scores. The method has been evaluated on a subset of the CVC-MUSCIMA dataset, showing encouraging results.
Keywords: Optical Music Recognition; Handwritten Music Scores; Dynamic Time Warping alignment
|
Lluis Pere de las Heras, Oriol Ramos Terrades, & Josep Llados. (2017). Ontology-Based Understanding of Architectural Drawings. In International Workshop on Graphics Recognition. GREC 2015.Graphic Recognition. Current Trends and Challenges (Vol. 9657, pp. 75–85). LNCS.
Abstract: In this paper we present a knowledge base of architectural documents aiming at improving existing methods of floor plan classification and understanding. It consists of an ontological definition of the domain and the inclusion of real instances coming from both, automatically interpreted and manually labeled documents. The knowledge base has proven to be an effective tool to structure our knowledge and to easily maintain and upgrade it. Moreover, it is an appropriate means to automatically check the consistency of relational data and a convenient complement of hard-coded knowledge interpretation systems.
Keywords: Graphics recognition; Floor plan analysi; Domain ontology
|
|
Fernando Vilariño, & Dan Norton. (2017). Using mutimedia tools to spread poetry collections. In Internet librarian International Conference.
|
|
Mireia Sole, Joan Blanco, Debora Gil, G. Fonseka, Richard Frodsham, Oliver Valero, et al. (2017). Unraveling the enigmas of chromosome territoriality during spermatogenesis. In IX Jornada del Departament de Biologia Cel•lular, Fisiologia i Immunologia.
|
David Vazquez, Jorge Bernal, F. Javier Sanchez, Gloria Fernandez Esparrach, Antonio Lopez, Adriana Romero, et al. (2017). A Benchmark for Endoluminal Scene Segmentation of Colonoscopy Images. JHCE - Journal of Healthcare Engineering, , 2040–2295.
Abstract: Colorectal cancer (CRC) is the third cause of cancer death world-wide. Currently, the standard approach to reduce CRC-related mortality is to perform regular screening in search for polyps and colonoscopy is the screening tool of choice. The main limitations of this screening procedure are polyp miss- rate and inability to perform visual assessment of polyp malignancy. These drawbacks can be reduced by designing Decision Support Systems (DSS) aim- ing to help clinicians in the different stages of the procedure by providing endoluminal scene segmentation. Thus, in this paper, we introduce an extended benchmark of colonoscopy image segmentation, with the hope of establishing a new strong benchmark for colonoscopy image analysis research. The proposed dataset consists of 4 relevant classes to inspect the endolumninal scene, tar- geting different clinical needs. Together with the dataset and taking advantage of advances in semantic segmentation literature, we provide new baselines by training standard fully convolutional networks (FCN). We perform a compar- ative study to show that FCN significantly outperform, without any further post-processing, prior results in endoluminal scene segmentation, especially with respect to polyp segmentation and localization.
Keywords: Colonoscopy images; Deep Learning; Semantic Segmentation
|
Jordi Esquirol, Cristina Palmero, Vanessa Bayo, Miquel Angel Cos, Sergio Escalera, David Sanchez, et al. (2017). Automatic RBG-depth-pressure anthropometric analysis and individualised sleep solution prescription. JMET - Journal of Medical Engineering & Technology, 486–497.
Abstract: INTRODUCTION:
Sleep surfaces must adapt to individual somatotypic features to maintain a comfortable, convenient and healthy sleep, preventing diseases and injuries. Individually determining the most adequate rest surface can often be a complex and subjective question.
OBJECTIVES:
To design and validate an automatic multimodal somatotype determination model to automatically recommend an individually designed mattress-topper-pillow combination.
METHODS:
Design and validation of an automated prescription model for an individualised sleep system is performed through a single-image 2 D-3 D analysis and body pressure distribution, to objectively determine optimal individual sleep surfaces combining five different mattress densities, three different toppers and three cervical pillows.
RESULTS:
A final study (n = 151) and re-analysis (n = 117) defined and validated the model, showing high correlations between calculated and real data (>85% in height and body circumferences, 89.9% in weight, 80.4% in body mass index and more than 70% in morphotype categorisation).
CONCLUSIONS:
Somatotype determination model can accurately prescribe an individualised sleep solution. This can be useful for healthy people and for health centres that need to adapt sleep surfaces to people with special needs. Next steps will increase model's accuracy and analise, if this prescribed individualised sleep solution can improve sleep quantity and quality; additionally, future studies will adapt the model to mattresses with technological improvements, tailor-made production and will define interfaces for people with special needs.
|
Ivet Rafegas, Javier Vazquez, Robert Benavente, Maria Vanrell, & Susana Alvarez. (2017). Enhancing spatio-chromatic representation with more-than-three color coding for image description. JOSA A - Journal of the Optical Society of America A, 34(5), 827–837.
Abstract: Extraction of spatio-chromatic features from color images is usually performed independently on each color channel. Usual 3D color spaces, such as RGB, present a high inter-channel correlation for natural images. This correlation can be reduced using color-opponent representations, but the spatial structure of regions with small color differences is not fully captured in two generic Red-Green and Blue-Yellow channels. To overcome these problems, we propose a new color coding that is adapted to the specific content of each image. Our proposal is based on two steps: (a) setting the number of channels to the number of distinctive colors we find in each image (avoiding the problem of channel correlation), and (b) building a channel representation that maximizes contrast differences within each color channel (avoiding the problem of low local contrast). We call this approach more-than-three color coding (MTT) to enhance the fact that the number of channels is adapted to the image content. The higher color complexity an image has, the more channels can be used to represent it. Here we select distinctive colors as the most predominant in the image, which we call color pivots, and we build the new color coding using these color pivots as a basis. To evaluate the proposed approach we measure its efficiency in an image categorization task. We show how a generic descriptor improves its performance at the description level when applied on the MTT coding.
|
Marta Diez-Ferrer, Debora Gil, Elena Carreño, Susana Padrones, & Samantha Aso. (2017). Positive Airway Pressure-Enhanced CT to Improve Virtual Bronchoscopic Navigation. JTO - Journal of Thoracic Oncology, 12(1S), S596–S597.
Abstract: A main weakness of virtual bronchoscopic navigation (VBN) is unsuccessful segmentation of distal branches approaching peripheral pulmonary nodules (PPN). CT scan acquisition protocol is pivotal for segmentation covering the utmost periphery. We hypothesize that application of continuous positive airway pressure (CPAP) during CT acquisition could improve visualization and segmentation of peripheral bronchi. The purpose of the present pilot study is to compare quality of segmentations under 4 CT acquisition modes: inspiration (INSP), expiration (EXP) and both with CPAP (INSP-CPAP and EXP-CPAP).
Keywords: Thorax CT; diagnosis; Peripheral Pulmonary Nodule
|
Arash Akbarinia, & Karl R. Gegenfurtner. (2017). Metameric Mismatching in Natural and Artificial Reflectances. JV - Journal of Vision, 17(10), 390.
Abstract: The human visual system and most digital cameras sample the continuous spectral power distribution through three classes of receptors. This implies that two distinct spectral reflectances can result in identical tristimulus values under one illuminant and differ under another – the problem of metamer mismatching. It is still debated how frequent this issue arises in the real world, using naturally occurring reflectance functions and common illuminants.
We gathered more than ten thousand spectral reflectance samples from various sources, covering a wide range of environments (e.g., flowers, plants, Munsell chips) and evaluated their responses under a number of natural and artificial source of lights. For each pair of reflectance functions, we estimated the perceived difference using the CIE-defined distance ΔE2000 metric in Lab color space.
The degree of metamer mismatching depended on the lower threshold value l when two samples would be considered to lead to equal sensor excitations (ΔE < l), and on the higher threshold value h when they would be considered different. For example, for l=h=1, we found that 43.129 comparisons out of a total of 6×107 pairs would be considered metameric (1 in 104). For l=1 and h=5, this number reduced to 705 metameric pairs (2 in 106). Extreme metamers, for instance l=1 and h=10, were rare (22 pairs or 6 in 108), as were instances where the two members of a metameric pair would be assigned to different color categories. Not unexpectedly, we observed variations among different reflectance databases and illuminant spectra with more frequency under artificial illuminants than natural ones.
Overall, our numbers are not very different from those obtained earlier (Foster et al, JOSA A, 2006). However, our results also show that the degree of metamerism is typically not very strong and that category switches hardly ever occur.
Keywords: Metamer; colour perception; spectral discrimination; photoreceptors
|
Katerine Diaz, Jesus Martinez del Rincon, & Aura Hernandez-Sabate. (2017). Decremental generalized discriminative common vectors applied to images classification. KBS - Knowledge-Based Systems, 131, 46–57.
Abstract: In this paper, a novel decremental subspace-based learning method called Decremental Generalized Discriminative Common Vectors method (DGDCV) is presented. The method makes use of the concept of decremental learning, which we introduce in the field of supervised feature extraction and classification. By efficiently removing unnecessary data and/or classes for a knowledge base, our methodology is able to update the model without recalculating the full projection or accessing to the previously processed training data, while retaining the previously acquired knowledge. The proposed method has been validated in 6 standard face recognition datasets, showing a considerable computational gain without compromising the accuracy of the model.
Keywords: Decremental learning; Generalized Discriminative Common Vectors; Feature extraction; Linear subspace methods; Classification
|
F. Javier Sanchez, Jorge Bernal, Cristina Sanchez Montes, Cristina Rodriguez de Miguel, & Gloria Fernandez Esparrach. (2017). Bright spot regions segmentation and classification for specular highlights detection in colonoscopy videos. MVAP - Machine Vision and Applications, , 1–20.
Abstract: A novel specular highlights detection method in colonoscopy videos is presented. The method is based on a model of appearance de ning specular
highlights as bright spots which are highly contrasted with respect to adjacent regions. Our approach proposes two stages; segmentation, and then classi cation
of bright spot regions. The former de nes a set of candidate regions obtained through a region growing process with local maxima as initial region seeds. This process creates a tree structure which keeps track, at each growing iteration, of the region frontier contrast; nal regions provided depend on restrictions over contrast value. Non-specular regions are ltered through a classi cation stage performed by a linear SVM classi er using model-based features from each region. We introduce a new validation database with more than 25; 000 regions along with their corresponding pixel-wise annotations. We perform a comparative study against other approaches. Results show that our method is superior to other approaches, with our segmented regions being
closer to actual specular regions in the image. Finally, we also present how our methodology can also be used to obtain an accurate prediction of polyp histology.
Keywords: Specular highlights; bright spot regions segmentation; region classification; colonoscopy
|
Laura Lopez-Fuentes, Joost Van de Weijer, Marc Bolaños, & Harald Skinnemoen. (2017). Multi-modal Deep Learning Approach for Flood Detection. In MediaEval Benchmarking Initiative for Multimedia Evaluation.
Abstract: In this paper we propose a multi-modal deep learning approach to detect floods in social media posts. Social media posts normally contain some metadata and/or visual information, therefore in order to detect the floods we use this information. The model is based on a Convolutional Neural Network which extracts the visual features and a bidirectional Long Short-Term Memory network to extract the semantic features from the textual metadata. We validate the
method on images extracted from Flickr which contain both visual information and metadata and compare the results when using both, visual information only or metadata only. This work has been done in the context of the MediaEval Multimedia Satellite Task.
|
Debora Gil, Sergio Vera, Agnes Borras, Albert Andaluz, & Miguel Angel Gonzalez Ballester. (2017). Anatomical Medial Surfaces with Efficient Resolution of Branches Singularities. MIA - Medical Image Analysis, 35, 390–402.
Abstract: Medial surfaces are powerful tools for shape description, but their use has been limited due to the sensibility existing methods to branching artifacts. Medial branching artifacts are associated to perturbations of the object boundary rather than to geometric features. Such instability is a main obstacle for a con dent application in shape recognition and description. Medial branches correspond to singularities of the medial surface and, thus, they are problematic for existing morphological and energy-based algorithms. In this paper, we use algebraic geometry concepts in an energy-based approach to compute a medial surface presenting a stable branching topology. We also present an ecient GPU-CPU implementation using standard image processing tools. We show the method computational eciency and quality on a custom made synthetic database. Finally, we present some results on a medical imaging application for localization of abdominal pathologies.
Keywords: Medial Representations; Shape Recognition; Medial Branching Stability ; Singular Points
|
