David Vazquez, Antonio Lopez, Daniel Ponsa, & Javier Marin. (2011). Virtual Worlds and Active Learning for Human Detection. In 13th International Conference on Multimodal Interaction (pp. 393–400). New York, NY, USA, USA: ACM DL.
Abstract: Image based human detection is of paramount interest due to its potential applications in fields such as advanced driving assistance, surveillance and media analysis. However, even detecting non-occluded standing humans remains a challenge of intensive research. The most promising human detectors rely on classifiers developed in the discriminative paradigm, i.e., trained with labelled samples. However, labeling is a manual intensive step, especially in cases like human detection where it is necessary to provide at least bounding boxes framing the humans for training. To overcome such problem, some authors have proposed the use of a virtual world where the labels of the different objects are obtained automatically. This means that the human models (classifiers) are learnt using the appearance of rendered images, i.e., using realistic computer graphics. Later, these models are used for human detection in images of the real world. The results of this technique are surprisingly good. However, these are not always as good as the classical approach of training and testing with data coming from the same camera, or similar ones. Accordingly, in this paper we address the challenge of using a virtual world for gathering (while playing a videogame) a large amount of automatically labelled samples (virtual humans and background) and then training a classifier that performs equal, in real-world images, than the one obtained by equally training from manually labelled real-world samples. For doing that, we cast the problem as one of domain adaptation. In doing so, we assume that a small amount of manually labelled samples from real-world images is required. To collect these labelled samples we propose a non-standard active learning technique. Therefore, ultimately our human model is learnt by the combination of virtual and real world labelled samples (Fig. 1), which has not been done before. We present quantitative results showing that this approach is valid.
Keywords: Pedestrian Detection; Human detection; Virtual; Domain Adaptation; Active Learning
|
Naveen Onkarappa, & Angel Sappa. (2011). Space Variant Representations for Mobile Platform Vision Applications. In W. Kropatsch A. Berciano H. Molina D. D. P. Real (Ed.), 14th International Conference on Computer Analysis of Images and Patterns (Vol. 6855, pp. 146–154). Springer Berlin Heidelberg.
Abstract: The log-polar space variant representation, motivated by biological vision, has been widely studied in the literature. Its data reduction and invariance properties made it useful in many vision applications. However, due to its nature, it fails in preserving features in the periphery. In the current work, as an attempt to overcome this problem, we propose a novel space-variant representation. It is evaluated and proved to be better than the log-polar representation in preserving the peripheral information, crucial for on-board mobile vision applications. The evaluation is performed by comparing log-polar and the proposed representation once they are used for estimating dense optical flow.
|
Carme Julia, Angel Sappa, Felipe Lumbreras, Joan Serrat, & Antonio Lopez. (2011). Rank Estimation in Missing Data Matrix Problems. JMIV - Journal of Mathematical Imaging and Vision, 39(2), 140–160.
Abstract: A novel technique for missing data matrix rank estimation is presented. It is focused on matrices of trajectories, where every element of the matrix corresponds to an image coordinate from a feature point of a rigid moving object at a given frame; missing data are represented as empty entries. The objective of the proposed approach is to estimate the rank of a missing data matrix in order to fill in empty entries with some matrix completion method, without using or assuming neither the number of objects contained in the scene nor the kind of their motion. The key point of the proposed technique consists in studying the frequency behaviour of the individual trajectories, which are seen as 1D signals. The main assumption is that due to the rigidity of the moving objects, the frequency content of the trajectories will be similar after filling in their missing entries. The proposed rank estimation approach can be used in different computer vision problems, where the rank of a missing data matrix needs to be estimated. Experimental results with synthetic and real data are provided in order to empirically show the good performance of the proposed approach.
|
Carme Julia, Felipe Lumbreras, & Angel Sappa. (2011). A Factorization-based Approach to Photometric Stereo. IJIST - International Journal of Imaging Systems and Technology, 21(1), 115–119.
Abstract: This article presents an adaptation of a factorization technique to tackle the photometric stereo problem. That is to recover the surface normals and reflectance of an object from a set of images obtained under different lighting conditions. The main contribution of the proposed approach is to consider pixels in shadow and saturated regions as missing data, in order to reduce their influence to the result. Concretely, an adapted Alternation technique is used to deal with missing data. Experimental results considering both synthetic and real images show the viability of the proposed factorization-based strategy. © 2011 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 21, 115–119, 2011.
|
David Vazquez, Antonio Lopez, Daniel Ponsa, & Javier Marin. (2011). Cool world: domain adaptation of virtual and real worlds for human detection using active learning. In NIPS Domain Adaptation Workshop: Theory and Application. Granada, Spain.
Abstract: Image based human detection is of paramount interest for different applications. The most promising human detectors rely on discriminatively learnt classifiers, i.e., trained with labelled samples. However, labelling is a manual intensive task, especially in cases like human detection where it is necessary to provide at least bounding boxes framing the humans for training. To overcome such problem, in Marin et al. we have proposed the use of a virtual world where the labels of the different objects are obtained automatically. This means that the human models (classifiers) are learnt using the appearance of realistic computer graphics. Later, these models are used for human detection in images of the real world. The results of this technique are surprisingly good. However, these are not always as good as the classical approach of training and testing with data coming from the same camera and the same type of scenario. Accordingly, in Vazquez et al. we cast the problem as one of supervised domain adaptation. In doing so, we assume that a small amount of manually labelled samples from real-world images is required. To collect these labelled samples we use an active learning technique. Thus, ultimately our human model is learnt by the combination of virtual- and real-world labelled samples which, to the best of our knowledge, was not done before. Here, we term such combined space cool world. In this extended abstract we summarize our proposal, and include quantitative results from Vazquez et al. showing its validity.
Keywords: Pedestrian Detection; Virtual; Domain Adaptation; Active Learning
|
Miguel Oliveira, Angel Sappa, & V.Santos. (2011). Unsupervised Local Color Correction for Coarsely Registered Images. In IEEE conference on Computer Vision and Pattern Recognition (pp. 201–208).
Abstract: The current paper proposes a new parametric local color correction technique. Initially, several color transfer functions are computed from the output of the mean shift color segmentation algorithm. Secondly, color influence maps are calculated. Finally, the contribution of every color transfer function is merged using the weights from the color influence maps. The proposed approach is compared with both global and local color correction approaches. Results show that our method outperforms the technique ranked first in a recent performance evaluation on this topic. Moreover, the proposed approach is computed in about one tenth of the time.
|
|
Mohammad Rouhani, & Angel Sappa. (2011). Implicit B-Spline Fitting Using the 3L Algorithm. In 18th IEEE International Conference on Image Processing (pp. 893–896).
|
Ferran Diego. (2011). Probabilistic Alignment of Video Sequences Recorded by Moving Cameras (Joan Serrat, Ed.). Ph.D. thesis, Ediciones Graficas Rey, .
Abstract: Video alignment consists of integrating multiple video sequences recorded independently into a single video sequence. This means to register both in time (synchronize
frames) and space (image registration) so that the two videos sequences can be fused
or compared pixel–wise. In spite of being relatively unknown, many applications today may benefit from the availability of robust and efficient video alignment methods.
For instance, video surveillance requires to integrate video sequences that are recorded
of the same scene at different times in order to detect changes. The problem of aligning videos has been addressed before, but in the relatively simple cases of fixed or rigidly attached cameras and simultaneous acquisition. In addition, most works rely
on restrictive assumptions which reduce its difficulty such as linear time correspondence or the knowledge of the complete trajectories of corresponding scene points on the images; to some extent, these assumptions limit the practical applicability of the solutions developed until now. In this thesis, we focus on the challenging problem of aligning sequences recorded at different times from independent moving cameras following similar but not coincident trajectories. More precisely, this thesis covers four studies that advance the state-of-the-art in video alignment. First, we focus on analyzing and developing a probabilistic framework for video alignment, that is, a principled way to integrate multiple observations and prior information. In this way, two different approaches are presented to exploit the combination of several purely visual features (image–intensities, visual words and dense motion field descriptor), and
global positioning system (GPS) information. Second, we focus on reformulating the
problem into a single alignment framework since previous works on video alignment
adopt a divide–and–conquer strategy, i.e., first solve the synchronization, and then
register corresponding frames. This also generalizes the ’classic’ case of fixed geometric transform and linear time mapping. Third, we focus on exploiting directly the
time domain of the video sequences in order to avoid exhaustive cross–frame search.
This provides relevant information used for learning the temporal mapping between
pairs of video sequences. Finally, we focus on adapting these methods to the on–line
setting for road detection and vehicle geolocation. The qualitative and quantitative
results presented in this thesis on a variety of real–world pairs of video sequences show that the proposed method is: robust to varying imaging conditions, different image
content (e.g., incoming and outgoing vehicles), variations on camera velocity, and
different scenarios (indoor and outdoor) going beyond the state–of–the–art. Moreover, the on–line video alignment has been successfully applied for road detection and
vehicle geolocation achieving promising results.
|
Mohammad Rouhani, & Angel Sappa. (2011). Correspondence Free Registration through a Point-to-Model Distance Minimization. In 13th IEEE International Conference on Computer Vision (pp. 2150–2157).
Abstract: This paper presents a novel formulation, which derives in a smooth minimization problem, to tackle the rigid registration between a given point set and a model set. Unlike most of the existing works, which are based on minimizing a point-wise correspondence term, we propose to describe the model set by means of an implicit representation. It allows a new definition of the registration error, which works beyond the point level representation. Moreover, it could be used in a gradient-based optimization framework. The proposed approach consists of two stages. Firstly, a novel formulation is proposed that relates the registration parameters with the distance between the model and data set. Secondly, the registration parameters are obtained by means of the Levengberg-Marquardt algorithm. Experimental results and comparisons with state of the art show the validity of the proposed framework.
|
Fadi Dornaika, Jose Manuel Alvarez, Angel Sappa, & Antonio Lopez. (2011). A New Framework for Stereo Sensor Pose through Road Segmentation and Registration. TITS - IEEE Transactions on Intelligent Transportation Systems, 12(4), 954–966.
Abstract: This paper proposes a new framework for real-time estimation of the onboard stereo head's position and orientation relative to the road surface, which is required for any advanced driver-assistance application. This framework can be used with all road types: highways, urban, etc. Unlike existing works that rely on feature extraction in either the image domain or 3-D space, we propose a framework that directly estimates the unknown parameters from the stream of stereo pairs' brightness. The proposed approach consists of two stages that are invoked for every stereo frame. The first stage segments the road region in one monocular view. The second stage estimates the camera pose using a featureless registration between the segmented monocular road region and the other view in the stereo pair. This paper has two main contributions. The first contribution combines a road segmentation algorithm with a registration technique to estimate the online stereo camera pose. The second contribution solves the registration using a featureless method, which is carried out using two different optimization techniques: 1) the differential evolution algorithm and 2) the Levenberg-Marquardt (LM) algorithm. We provide experiments and evaluations of performance. The results presented show the validity of our proposed framework.
Keywords: road detection
|
Naveen Onkarappa, Sujay M. Veerabhadrappa, & Angel Sappa. (2012). Optical Flow in Onboard Applications: A Study on the Relationship Between Accuracy and Scene Texture. In 4th International Conference on Signal and Image Processing (Vol. 221, pp. 257–267).
Abstract: Optical flow has got a major role in making advanced driver assistance systems (ADAS) a reality. ADAS applications are expected to perform efficiently in all kinds of environments, those are highly probable, that one can drive the vehicle in different kinds of roads, times and seasons. In this work, we study the relationship of optical flow with different roads, that is by analyzing optical flow accuracy on different road textures. Texture measures such as TeX , TeX and TeX are evaluated for this purpose. Further, the relation of regularization weight to the flow accuracy in the presence of different textures is also analyzed. Additionally, we present a framework to generate synthetic sequences of different textures in ADAS scenarios with ground-truth optical flow.
|
Mohammad Rouhani, & Angel Sappa. (2012). Implicit Polynomial Representation through a Fast Fitting Error Estimation. TIP - IEEE Transactions on Image Processing, 21(4), 2089–2098.
Abstract: Impact Factor
This paper presents a simple distance estimation for implicit polynomial fitting. It is computed as the height of a simplex built between the point and the surface (i.e., a triangle in 2-D or a tetrahedron in 3-D), which is used as a coarse but reliable estimation of the orthogonal distance. The proposed distance can be described as a function of the coefficients of the implicit polynomial. Moreover, it is differentiable and has a smooth behavior . Hence, it can be used in any gradient-based optimization. In this paper, its use in a Levenberg-Marquardt framework is shown, which is particularly devoted for nonlinear least squares problems. The proposed estimation is a generalization of the gradient-based distance estimation, which is widely used in the literature. Experimental results, both in 2-D and 3-D data sets, are provided. Comparisons with state-of-the-art techniques are presented, showing the advantages of the proposed approach.
|
G.D. Evangelidis, Ferran Diego, Joan Serrat, & Antonio Lopez. (2011). Slice Matching for Accurate Spatio-Temporal Alignment. In In ICCV Workshop on Visual Surveillance.
Abstract: Video synchronization and alignment is a rather recent topic in computer vision. It usually deals with the problem of aligning sequences recorded simultaneously by static, jointly- or independently-moving cameras. In this paper, we investigate the more difficult problem of matching videos captured at different times from independently-moving cameras, whose trajectories are approximately coincident or parallel. To this end, we propose a novel method that pixel-wise aligns videos and allows thus to automatically highlight their differences. This primarily aims at visual surveillance but the method can be adopted as is by other related video applications, like object transfer (augmented reality) or high dynamic range video. We build upon a slice matching scheme to first synchronize the sequences, while we develop a spatio-temporal alignment scheme to spatially register corresponding frames and refine the temporal mapping. We investigate the performance of the proposed method on videos recorded from vehicles driven along different types of roads and compare with related previous works.
Keywords: video alignment
|
G. Roig, Xavier Boix, F. de la Torre, Joan Serrat, & C. Vilella. (2011). Hierarchical CRF with product label spaces for parts-based Models. In IEEE Conference on Automatic Face and Gesture Recognition.
Abstract: Non-rigid object detection is a challenging an open research problem in computer vision. It is a critical part in many applications such as image search, surveillance, human-computer interaction or image auto-annotation. Most successful approaches to non-rigid object detection make use of part-based models. In particular, Conditional Random Fields (CRF) have been successfully embedded into a discriminative parts-based model framework due to its effectiveness for learning and inference (usually based on a tree structure). However, CRF-based approaches do not incorporate global constraints and only model pairwise interactions. This is especially important when modeling object classes that may have complex parts interactions (e.g. facial features or body articulations), because neglecting them yields an oversimplified model with suboptimal performance. To overcome this limitation, this paper proposes a novel hierarchical CRF (HCRF). The main contribution is to build a hierarchy of part combinations by extending the label set to a hierarchy of product label spaces. In order to keep the inference computation tractable, we propose an effective method to reduce the new label set. We test our method on two applications: facial feature detection on the Multi-PIE database and human pose estimation on the Buffy dataset.
|
Jose Carlos Rubio, Joan Serrat, Antonio Lopez, & Daniel Ponsa. (2012). Multiple target tracking for intelligent headlights control. TITS - IEEE Transactions on Intelligent Transportation Systems, 13(2), 594–605.
Abstract: Intelligent vehicle lighting systems aim at automatically regulating the headlights' beam to illuminate as much of the road ahead as possible while avoiding dazzling other drivers. A key component of such a system is computer vision software that is able to distinguish blobs due to vehicles' headlights and rear lights from those due to road lamps and reflective elements such as poles and traffic signs. In a previous work, we have devised a set of specialized supervised classifiers to make such decisions based on blob features related to its intensity and shape. Despite the overall good performance, there remain challenging that have yet to be solved: notably, faint and tiny blobs corresponding to quite distant vehicles. In fact, for such distant blobs, classification decisions can be taken after observing them during a few frames. Hence, incorporating tracking could improve the overall lighting system performance by enforcing the temporal consistency of the classifier decision. Accordingly, this paper focuses on the problem of constructing blob tracks, which is actually one of multiple-target tracking (MTT), but under two special conditions: We have to deal with frequent occlusions, as well as blob splits and merges. We approach it in a novel way by formulating the problem as a maximum a posteriori inference on a Markov random field. The qualitative (in video form) and quantitative evaluation of our new MTT method shows good tracking results. In addition, we will also see that the classification performance of the problematic blobs improves due to the proposed MTT algorithm.
Keywords: Intelligent Headlights
|
