Aura Hernandez-Sabate, Debora Gil, David Roche, Monica M. S. Matsumoto, & Sergio S. Furuie. (2011). Inferring the Performance of Medical Imaging Algorithms. In Pedro Real, Daniel Diaz-Pernil, Helena Molina-Abril, Ainhoa Berciano, & Walter Kropatsch (Eds.), 14th International Conference on Computer Analysis of Images and Patterns (Vol. 6854, pp. 520–528). LNCS. Berlin: Springer-Verlag Berlin Heidelberg.
Abstract: Evaluation of the performance and limitations of medical imaging algorithms is essential to estimate their impact in social, economic or clinical aspects. However, validation of medical imaging techniques is a challenging task due to the variety of imaging and clinical problems involved, as well as, the difficulties for systematically extracting a reliable solely ground truth. Although specific validation protocols are reported in any medical imaging paper, there are still two major concerns: definition of standardized methodologies transversal to all problems and generalization of conclusions to the whole clinical data set.
We claim that both issues would be fully solved if we had a statistical model relating ground truth and the output of computational imaging techniques. Such a statistical model could conclude to what extent the algorithm behaves like the ground truth from the analysis of a sampling of the validation data set. We present a statistical inference framework reporting the agreement and describing the relationship of two quantities. We show its transversality by applying it to validation of two different tasks: contour segmentation and landmark correspondence.
Keywords: Validation, Statistical Inference, Medical Imaging Algorithms.
|
David Roche, Debora Gil, & Jesus Giraldo. (2011). Using statistical inference for designing termination conditions ensuring convergence of Evolutionary Algorithms. In 11th European Conference on Artificial Life.
Abstract: A main challenge in Evolutionary Algorithms (EAs) is determining a termination condition ensuring stabilization close to the optimum in real-world applications. Although for known test functions distribution-based quantities are good candidates (as far as suitable parameters are used), in real-world problems an open question still remains unsolved. How can we estimate an upper-bound for the termination condition value ensuring a given accuracy for the (unknown) EA solution?
We claim that the termination problem would be fully solved if we defined a quantity (depending only on the EA output) behaving like the solution accuracy. The open question would be, then, satisfactorily answered if we had a model relating both quantities, since accuracy could be predicted from the alternative quantity. We present a statistical inference framework addressing two topics: checking the correlation between the two quantities and defining a regression model for predicting (at a given confidence level) accuracy values from the EA output.
|
Ferran Poveda, Debora Gil, Albert Andaluz, & Enric Marti. (2011). Multiscale Tractography for Representing Heart Muscular Architecture. In In MICCAI 2011 Workshop on Computational Diffusion MRI.
Abstract: Deep understanding of myocardial structure of the heart would unravel crucial knowledge for clinical and medical procedures. Although the muscular architecture of the heart has been debated by countless researchers, the controversy is still alive. Diffusion Tensor MRI, DT-MRI, is a unique imaging technique for computational validation of the muscular structure of the heart. By the complex arrangement of myocites, existing techniques can not provide comprehensive descriptions of the global muscular architecture. In this paper we introduce a multiresolution reconstruction technique based on DT-MRI streamlining for simplified global myocardial model generation. Our reconstructions can restore the most complex myocardial structures and indicate a global helical organization
|
Patricia Marquez, Debora Gil, & Aura Hernandez-Sabate. (2011). A Confidence Measure for Assessing Optical Flow Accuracy in the Absence of Ground Truth. In IEEE International Conference on Computer Vision – Workshops (pp. 2042–2049). Barcelona (Spain): IEEE.
Abstract: Optical flow is a valuable tool for motion analysis in autonomous navigation systems. A reliable application requires determining the accuracy of the computed optical flow. This is a main challenge given the absence of ground truth in real world sequences. This paper introduces a measure of optical flow accuracy for Lucas-Kanade based flows in terms of the numerical stability of the data-term. We call this measure optical flow condition number. A statistical analysis over ground-truth data show a good statistical correlation between the condition number and optical flow error. Experiments on driving sequences illustrate its potential for autonomous navigation systems.
Keywords: IEEE International Conference on Computer Vision – Workshops
|
Andrew Nolan, Daniel Serrano, Aura Hernandez-Sabate, Daniel Ponsa, & Antonio Lopez. (2013). Obstacle mapping module for quadrotors on outdoor Search and Rescue operations. In International Micro Air Vehicle Conference and Flight Competition.
Abstract: Obstacle avoidance remains a challenging task for Micro Aerial Vehicles (MAV), due to their limited payload capacity to carry advanced sensors. Unlike larger vehicles, MAV can only carry light weight sensors, for instance a camera, which is our main assumption in this work. We explore passive monocular depth estimation and propose a novel method Position Aided Depth Estimation
(PADE). We analyse PADE performance and compare it against the extensively used Time To Collision (TTC). We evaluate the accuracy, robustness to noise and speed of three Optical Flow (OF) techniques, combined with both depth estimation methods. Our results show PADE is more accurate than TTC at depths between 0-12 meters and is less sensitive to noise. Our findings highlight the potential application of PADE for MAV to perform safe autonomous navigation in
unknown and unstructured environments.
Keywords: UAV
|
|
Anastasios Doulamis, Nikolaos Doulamis, Marco Bertini, Jordi Gonzalez, & Thomas B. Moeslund. (2013). Analysis and Retrieval of Tracked Events and Motion in Imagery Streams.
|
Lluis Pere de las Heras, Ahmed Sheraz, Marcus Liwicki, Ernest Valveny, & Gemma Sanchez. (2014). Statistical Segmentation and Structural Recognition for Floor Plan Interpretation. IJDAR - International Journal on Document Analysis and Recognition, 17(3), 221–237.
Abstract: A generic method for floor plan analysis and interpretation is presented in this article. The method, which is mainly inspired by the way engineers draw and interpret floor plans, applies two recognition steps in a bottom-up manner. First, basic building blocks, i.e., walls, doors, and windows are detected using a statistical patch-based segmentation approach. Second, a graph is generated, and structural pattern recognition techniques are applied to further locate the main entities, i.e., rooms of the building. The proposed approach is able to analyze any type of floor plan regardless of the notation used. We have evaluated our method on different publicly available datasets of real architectural floor plans with different notations. The overall detection and recognition accuracy is about 95 %, which is significantly better than any other state-of-the-art method. Our approach is generic enough such that it could be easily adopted to the recognition and interpretation of any other printed machine-generated structured documents.
|
H. Emrah Tasli, Cevahir Çigla, Theo Gevers, & A. Aydin Alatan. (2013). Super pixel extraction via convexity induced boundary adaptation. In 14th IEEE International Conference on Multimedia and Expo (pp. 1–6).
Abstract: This study presents an efficient super-pixel extraction algorithm with major contributions to the state-of-the-art in terms of accuracy and computational complexity. Segmentation accuracy is improved through convexity constrained geodesic distance utilization; while computational efficiency is achieved by replacing complete region processing with boundary adaptation idea. Starting from the uniformly distributed rectangular equal-sized super-pixels, region boundaries are adapted to intensity edges iteratively by assigning boundary pixels to the most similar neighboring super-pixels. At each iteration, super-pixel regions are updated and hence progressively converging to compact pixel groups. Experimental results with state-of-the-art comparisons, validate the performance of the proposed technique in terms of both accuracy and speed.
|
H. Emrah Tasli, Jan van Gemert, & Theo Gevers. (2013). Spot the differences: from a photograph burst to the single best picture. In 21ST ACM International Conference on Multimedia (pp. 729–732).
Abstract: With the rise of the digital camera, people nowadays typically take several near-identical photos of the same scene to maximize the chances of a good shot. This paper proposes a user-friendly tool for exploring a personal photo gallery for selecting or even creating the best shot of a scene between its multiple alternatives. This functionality is realized through a graphical user interface where the best viewpoint can be selected from a generated panorama of the scene. Once the viewpoint is selected, the user is able to go explore possible alternatives coming from the other images. Using this tool, one can explore a photo gallery efficiently. Moreover, additional compositions from other images are also possible. With such additional compositions, one can go from a burst of photographs to the single best one. Even funny compositions of images, where you can duplicate a person in the same image, are possible with our proposed tool.
|
|
Sezer Karaoglu, Jan van Gemert, & Theo Gevers. (2013). Con-text: text detection using background connectivity for fine-grained object classification. In 21ST ACM International Conference on Multimedia (pp. 757–760).
|
|
Eric Amiel. (2005). Visualisation de vaisseaux sanguins (Enric Marti, Ed.). Bachelor's thesis, Université Paul Sabatier Toulouse III, Toulouse.
|
Ivo Everts, Jan van Gemert, & Theo Gevers. (2013). Evaluation of Color STIPs for Human Action Recognition. In IEEE Conference on Computer Vision and Pattern Recognition (pp. 2850–2857).
Abstract: This paper is concerned with recognizing realistic human actions in videos based on spatio-temporal interest points (STIPs). Existing STIP-based action recognition approaches operate on intensity representations of the image data. Because of this, these approaches are sensitive to disturbing photometric phenomena such as highlights and shadows. Moreover, valuable information is neglected by discarding chromaticity from the photometric representation. These issues are addressed by Color STIPs. Color STIPs are multi-channel reformulations of existing intensity-based STIP detectors and descriptors, for which we consider a number of chromatic representations derived from the opponent color space. This enhanced modeling of appearance improves the quality of subsequent STIP detection and description. Color STIPs are shown to substantially outperform their intensity-based counterparts on the challenging UCF~sports, UCF11 and UCF50 action recognition benchmarks. Moreover, the results show that color STIPs are currently the single best low-level feature choice for STIP-based approaches to human action recognition.
|
Fares Alnajar, Theo Gevers, Roberto Valenti, & Sennay Ghebreab. (2013). Calibration-free Gaze Estimation using Human Gaze Patterns. In 15th IEEE International Conference on Computer Vision (pp. 137–144).
Abstract: We present a novel method to auto-calibrate gaze estimators based on gaze patterns obtained from other viewers. Our method is based on the observation that the gaze patterns of humans are indicative of where a new viewer will look at [12]. When a new viewer is looking at a stimulus, we first estimate a topology of gaze points (initial gaze points). Next, these points are transformed so that they match the gaze patterns of other humans to find the correct gaze points. In a flexible uncalibrated setup with a web camera and no chin rest, the proposed method was tested on ten subjects and ten images. The method estimates the gaze points after looking at a stimulus for a few seconds with an average accuracy of 4.3 im. Although the reported performance is lower than what could be achieved with dedicated hardware or calibrated setup, the proposed method still provides a sufficient accuracy to trace the viewer attention. This is promising considering the fact that auto-calibration is done in a flexible setup , without the use of a chin rest, and based only on a few seconds of gaze initialization data. To the best of our knowledge, this is the first work to use human gaze patterns in order to auto-calibrate gaze estimators.
|
Hamdi Dibeklioglu, Albert Ali Salah, & Theo Gevers. (2013). Like Father, Like Son: Facial Expression Dynamics for Kinship Verification. In 15th IEEE International Conference on Computer Vision (pp. 1497–1504).
Abstract: Kinship verification from facial appearance is a difficult problem. This paper explores the possibility of employing facial expression dynamics in this problem. By using features that describe facial dynamics and spatio-temporal appearance over smile expressions, we show that it is possible to improve the state of the art in this problem, and verify that it is indeed possible to recognize kinship by resemblance of facial expressions. The proposed method is tested on different kin relationships. On the average, 72.89% verification accuracy is achieved on spontaneous smiles.
|
Jorge Bernal. (2009). Use of Projection and Back-projection Methods in Bidimensional Computed Tomography Image Reconstruction (Vol. 141). Master's thesis, , Barcelona, Spain.
Abstract: One of the biggest drawbacks related to the use of CT scanners is the cost (in memory and in time) associated. In this project many methods to simulate their functioning, but in a more feasible way (taking an industrial point of view), will be studied.
The main group of techniques that are being used are the one entitled as ’back-projection’. The concept behind is to simulate the X ray emission in CT scans by lines that cross with the image we want to reconstruct.
In the first part of this document euclidean geometry is used to face the tasks of projec- tion and back-projection. After analysing the results achieved it has been proved that this approach does not lead to a fully perfect reconstruction (and also has some other problems related to running time and memory cost). Because of this in the second part of the document ’Filtered Back-projection’ method is introduced in order to improve the results.
Filtered Back-projection methods rely on mathematical transforms (Fourier, Radon) in order to provide more accurate results that can be obtained in much less time. The main cause of this better results is the use of a filtering process before the back-projection in order to avoid high frequency-caused errors.
As a result of this project two different implementations (one for each approach) had been implemented in order to compare their performance.
Keywords: Projection, Back-projection, CT scan, Euclidean geometry, Radon transform
|
