Xavier Soria, Angel Sappa, & Riad I. Hammoud. (2018). Wide-Band Color Imagery Restoration for RGB-NIR Single Sensor Images. SENS - Sensors, 18(7), 2059.
Abstract: Multi-spectral RGB-NIR sensors have become ubiquitous in recent years. These sensors allow the visible and near-infrared spectral bands of a given scene to be captured at the same time. With such cameras, the acquired imagery has a compromised RGB color representation due to near-infrared bands (700–1100 nm) cross-talking with the visible bands (400–700 nm).
This paper proposes two deep learning-based architectures to recover the full RGB color images, thus removing the NIR information from the visible bands. The proposed approaches directly restore the high-resolution RGB image by means of convolutional neural networks. They are evaluated with several outdoor images; both architectures reach a similar performance when evaluated in different
scenarios and using different similarity metrics. Both of them improve the state of the art approaches.
Keywords: RGB-NIR sensor; multispectral imaging; deep learning; CNNs
|
Rahat Khan, Joost Van de Weijer, Dimosthenis Karatzas, & Damien Muselet. (2013). Towards multispectral data acquisition with hand-held devices. In 20th IEEE International Conference on Image Processing (pp. 2053–2057).
Abstract: We propose a method to acquire multispectral data with handheld devices with front-mounted RGB cameras. We propose to use the display of the device as an illuminant while the camera captures images illuminated by the red, green and
blue primaries of the display. Three illuminants and three response functions of the camera lead to nine response values which are used for reflectance estimation. Results are promising and show that the accuracy of the spectral reconstruction improves in the range from 30-40% over the spectral
reconstruction based on a single illuminant. Furthermore, we propose to compute sensor-illuminant aware linear basis by discarding the part of the reflectances that falls in the sensorilluminant null-space. We show experimentally that optimizing reflectance estimation on these new basis functions decreases
the RMSE significantly over basis functions that are independent to sensor-illuminant. We conclude that, multispectral data acquisition is potentially possible with consumer hand-held devices such as tablets, mobiles, and laptops, opening up applications which are currently considered to be unrealistic.
Keywords: Multispectral; mobile devices; color measurements
|
|
Elvina Motard, Bogdan Raducanu, Viviane Cadenat, & Jordi Vitria. (2007). Incremental On-Line Topological Map Learning for A Visual Homing Application. In IEEE International Conference on Robotics and Automation (2049–2054).
|
Mikhail Mozerov. (2013). Constrained Optical Flow Estimation as a Matching Problem. TIP - IEEE Transactions on Image Processing, 22(5), 2044–2055.
Abstract: In general, discretization in the motion vector domain yields an intractable number of labels. In this paper we propose an approach that can reduce general optical flow to the constrained matching problem by pre-estimating a 2D disparity labeling map of the desired discrete motion vector function. One of the goals of the proposed paper is estimating coarse distribution of motion vectors and then utilizing this distribution as global constraints for discrete optical flow estimation. This pre-estimation is done with a simple frame-to-frame correlation technique also known as the digital symmetric-phase-only-filter (SPOF). We discover a strong correlation between the output of the SPOF and the motion vector distribution of the related optical flow. The two step matching paradigm for optical flow estimation is applied: pixel accuracy (integer flow), and subpixel accuracy estimation. The matching problem is solved by global optimization. Experiments on the Middlebury optical flow datasets confirm our intuitive assumptions about strong correlation between motion vector distribution of optical flow and maximal peaks of SPOF outputs. The overall performance of the proposed method is promising and achieves state-of-the-art results on the Middlebury benchmark.
|
Patricia Marquez, Debora Gil, & Aura Hernandez-Sabate. (2011). A Confidence Measure for Assessing Optical Flow Accuracy in the Absence of Ground Truth. In IEEE International Conference on Computer Vision – Workshops (pp. 2042–2049). Barcelona (Spain): IEEE.
Abstract: Optical flow is a valuable tool for motion analysis in autonomous navigation systems. A reliable application requires determining the accuracy of the computed optical flow. This is a main challenge given the absence of ground truth in real world sequences. This paper introduces a measure of optical flow accuracy for Lucas-Kanade based flows in terms of the numerical stability of the data-term. We call this measure optical flow condition number. A statistical analysis over ground-truth data show a good statistical correlation between the condition number and optical flow error. Experiments on driving sequences illustrate its potential for autonomous navigation systems.
Keywords: IEEE International Conference on Computer Vision – Workshops
|
David Vazquez, Jorge Bernal, F. Javier Sanchez, Gloria Fernandez Esparrach, Antonio Lopez, Adriana Romero, et al. (2017). A Benchmark for Endoluminal Scene Segmentation of Colonoscopy Images. JHCE - Journal of Healthcare Engineering, , 2040–2295.
Abstract: Colorectal cancer (CRC) is the third cause of cancer death world-wide. Currently, the standard approach to reduce CRC-related mortality is to perform regular screening in search for polyps and colonoscopy is the screening tool of choice. The main limitations of this screening procedure are polyp miss- rate and inability to perform visual assessment of polyp malignancy. These drawbacks can be reduced by designing Decision Support Systems (DSS) aim- ing to help clinicians in the different stages of the procedure by providing endoluminal scene segmentation. Thus, in this paper, we introduce an extended benchmark of colonoscopy image segmentation, with the hope of establishing a new strong benchmark for colonoscopy image analysis research. The proposed dataset consists of 4 relevant classes to inspect the endolumninal scene, tar- geting different clinical needs. Together with the dataset and taking advantage of advances in semantic segmentation literature, we provide new baselines by training standard fully convolutional networks (FCN). We perform a compar- ative study to show that FCN significantly outperform, without any further post-processing, prior results in endoluminal scene segmentation, especially with respect to polyp segmentation and localization.
Keywords: Colonoscopy images; Deep Learning; Semantic Segmentation
|
Gemma Rotger, Felipe Lumbreras, Francesc Moreno-Noguer, & Antonio Agudo. (2018). 2D-to-3D Facial Expression Transfer. In 24th International Conference on Pattern Recognition (pp. 2008–2013).
Abstract: Automatically changing the expression and physical features of a face from an input image is a topic that has been traditionally tackled in a 2D domain. In this paper, we bring this problem to 3D and propose a framework that given an
input RGB video of a human face under a neutral expression, initially computes his/her 3D shape and then performs a transfer to a new and potentially non-observed expression. For this purpose, we parameterize the rest shape –obtained from standard factorization approaches over the input video– using a triangular
mesh which is further clustered into larger macro-segments. The expression transfer problem is then posed as a direct mapping between this shape and a source shape, such as the blend shapes of an off-the-shelf 3D dataset of human facial expressions. The mapping is resolved to be geometrically consistent between 3D models by requiring points in specific regions to map on semantic
equivalent regions. We validate the approach on several synthetic and real examples of input faces that largely differ from the source shapes, yielding very realistic expression transfers even in cases with topology changes, such as a synthetic video sequence of a single-eyed cyclops.
|
Miquel Ferrer, Ernest Valveny, & F. Serratosa. (2009). Median Graphs: A Genetic Approach based on New Theoretical Properties. PR - Pattern Recognition, 42(9), 2003–2012.
Abstract: Given a set of graphs, the median graph has been theoretically presented as a useful concept to infer a representative of the set. However, the computation of the median graph is a highly complex task and its practical application has been very limited up to now. In this work we present two major contributions. On one side, and from a theoretical point of view, we show new theoretical properties of the median graph. On the other side, using these new properties, we present a new approximate algorithm based on the genetic search, that improves the computation of the median graph. Finally, we perform a set of experiments on real data, where none of the existing algorithms for the median graph computation could be applied up to now due to their computational complexity. With these results, we show how the concept of the median graph can be used in real applications and leaves the box of the only-theoretical concepts, demonstrating, from a practical point of view, that can be a useful tool to represent a set of graphs.
Keywords: Median graph; Genetic search; Maximum common subgraph; Graph matching; Structural pattern recognition
|
Javier Vazquez, Maria Vanrell, Ramon Baldrich, & Francesc Tous. (2012). Color Constancy by Category Correlation. TIP - IEEE Transactions on Image Processing, 21(4), 1997–2007.
Abstract: Finding color representations which are stable to illuminant changes is still an open problem in computer vision. Until now most approaches have been based on physical constraints or statistical assumptions derived from the scene, while very little attention has been paid to the effects that selected illuminants have
on the final color image representation. The novelty of this work is to propose
perceptual constraints that are computed on the corrected images. We define the
category hypothesis, which weights the set of feasible illuminants according to their ability to map the corrected image onto specific colors. Here we choose these colors as the universal color categories related to basic linguistic terms which have been psychophysically measured. These color categories encode natural color statistics, and their relevance across different cultures is indicated by the fact that they have received a common color name. From this category hypothesis we propose a fast implementation that allows the sampling of a large set of illuminants. Experiments prove that our method rivals current state-of-art performance without the need for training algorithmic parameters. Additionally, the method can be used as a framework to insert top-down information from other sources, thus opening further research directions in solving for color constancy.
|
Sergio Escalera, Alicia Fornes, Oriol Pujol, Alberto Escudero, & Petia Radeva. (2009). Circular Blurred Shape Model for Symbol Spotting in Documents. In 16th IEEE International Conference on Image Processing (pp. 1985–1988).
Abstract: Symbol spotting problem requires feature extraction strategies able to generalize from training samples and to localize the target object while discarding most part of the image. In the case of document analysis, symbol spotting techniques have to deal with a high variability of symbols' appearance. In this paper, we propose the Circular Blurred Shape Model descriptor. Feature extraction is performed capturing the spatial arrangement of significant object characteristics in a correlogram structure. Shape information from objects is shared among correlogram regions, being tolerant to the irregular deformations. Descriptors are learnt using a cascade of classifiers and Abadoost as the base classifier. Finally, symbol spotting is performed by means of a windowing strategy using the learnt cascade over plan and old musical score documents. Spotting and multi-class categorization results show better performance comparing with the state-of-the-art descriptors.
|
Jaume Gibert, Ernest Valveny, & Horst Bunke. (2012). Feature Selection on Node Statistics Based Embedding of Graphs. PRL - Pattern Recognition Letters, 33(15), 1980–1990.
Abstract: Representing a graph with a feature vector is a common way of making statistical machine learning algorithms applicable to the domain of graphs. Such a transition from graphs to vectors is known as graphembedding. A key issue in graphembedding is to select a proper set of features in order to make the vectorial representation of graphs as strong and discriminative as possible. In this article, we propose features that are constructed out of frequencies of node label representatives. We first build a large set of features and then select the most discriminative ones according to different ranking criteria and feature transformation algorithms. On different classification tasks, we experimentally show that only a small significant subset of these features is needed to achieve the same classification rates as competing to state-of-the-art methods.
Keywords: Structural pattern recognition; Graph embedding; Feature ranking; PCA; Graph classification
|
Partha Pratim Roy, Umapada Pal, Josep Llados, & Mathieu Nicolas Delalandre. (2012). Multi-oriented touching text character segmentation in graphical documents using dynamic programming. PR - Pattern Recognition, 45(5), 1972–1983.
Abstract: 2,292 JCR
The touching character segmentation problem becomes complex when touching strings are multi-oriented. Moreover in graphical documents sometimes characters in a single-touching string have different orientations. Segmentation of such complex touching is more challenging. In this paper, we present a scheme towards the segmentation of English multi-oriented touching strings into individual characters. When two or more characters touch, they generate a big cavity region in the background portion. Based on the convex hull information, at first, we use this background information to find some initial points for segmentation of a touching string into possible primitives (a primitive consists of a single character or part of a character). Next, the primitives are merged to get optimum segmentation. A dynamic programming algorithm is applied for this purpose using the total likelihood of characters as the objective function. A SVM classifier is used to find the likelihood of a character. To consider multi-oriented touching strings the features used in the SVM are invariant to character orientation. Experiments were performed in different databases of real and synthetic touching characters and the results show that the method is efficient in segmenting touching characters of arbitrary orientations and sizes.
|
Wenjuan Gong, Xuena Zhang, Jordi Gonzalez, Andrews Sobral, Thierry Bouwmans, Changhe Tu, et al. (2016). Human Pose Estimation from Monocular Images: A Comprehensive Survey. SENS - Sensors, 16(12), 1966.
Abstract: Human pose estimation refers to the estimation of the location of body parts and how they are connected in an image. Human pose estimation from monocular images has wide applications (e.g., image indexing). Several surveys on human pose estimation can be found in the literature, but they focus on a certain category; for example, model-based approaches or human motion analysis, etc. As far as we know, an overall review of this problem domain has yet to be provided. Furthermore, recent advancements based on deep learning have brought novel algorithms for this problem. In this paper, a comprehensive survey of human pose estimation from monocular images is carried out including milestone works and recent advancements. Based on one standard pipeline for the solution of computer vision problems, this survey splits the problem into several modules: feature extraction and description, human body models, and modeling
methods. Problem modeling methods are approached based on two means of categorization in this survey. One way to categorize includes top-down and bottom-up methods, and another way includes generative and discriminative methods. Considering the fact that one direct application of human pose estimation is to provide initialization for automatic video surveillance, there are additional sections for motion-related methods in all modules: motion features, motion models, and motion-based methods. Finally, the paper also collects 26 publicly available data sets for validation and provides error measurement methods that are frequently used.
Keywords: human pose estimation; human bodymodels; generativemethods; discriminativemethods; top-down methods; bottom-up methods
|
Anjan Dutta, Umapada Pal, Alicia Fornes, & Josep Llados. (2010). An Efficient Staff Removal Technique from Printed Musical Documents. In 20th International Conference on Pattern Recognition (1965–1968).
Abstract: Staff removal is an important preprocessing step of the Optical Music Recognition (OMR). The process aims to remove the stafflines from a musical document and retain only the musical symbols, later these symbols are used effectively to identify the music information. This paper proposes a simple but robust method to remove stafflines from printed musical scores. In the proposed methodology we have considered a staffline segment as a horizontal linkage of vertical black runs with uniform height. We have used the neighbouring properties of a staffline segment to validate it as a true segment. We have considered the dataset along with the deformations described in for evaluation purpose. From experimentation we have got encouraging results.
|
Alicia Fornes, Sergio Escalera, Josep Llados, & Ernest Valveny. (2010). Symbol Classification using Dynamic Aligned Shape Descriptor. In 20th International Conference on Pattern Recognition (1957–1960).
Abstract: Shape representation is a difficult task because of several symbol distortions, such as occlusions, elastic deformations, gaps or noise. In this paper, we propose a new descriptor and distance computation for coping with the problem of symbol recognition in the domain of Graphical Document Image Analysis. The proposed D-Shape descriptor encodes the arrangement information of object parts in a circular structure, allowing different levels of distortion. The classification is performed using a cyclic Dynamic Time Warping based method, allowing distortions and rotation. The methodology has been validated on different data sets, showing very high recognition rates.
|
