Andrew Nolan, Daniel Serrano, Aura Hernandez-Sabate, Daniel Ponsa, & Antonio Lopez. (2013). Obstacle mapping module for quadrotors on outdoor Search and Rescue operations. In International Micro Air Vehicle Conference and Flight Competition.
Abstract: Obstacle avoidance remains a challenging task for Micro Aerial Vehicles (MAV), due to their limited payload capacity to carry advanced sensors. Unlike larger vehicles, MAV can only carry light weight sensors, for instance a camera, which is our main assumption in this work. We explore passive monocular depth estimation and propose a novel method Position Aided Depth Estimation
(PADE). We analyse PADE performance and compare it against the extensively used Time To Collision (TTC). We evaluate the accuracy, robustness to noise and speed of three Optical Flow (OF) techniques, combined with both depth estimation methods. Our results show PADE is more accurate than TTC at depths between 0-12 meters and is less sensitive to noise. Our findings highlight the potential application of PADE for MAV to perform safe autonomous navigation in
unknown and unstructured environments.
Keywords: UAV
|
|
Anastasios Doulamis, Nikolaos Doulamis, Marco Bertini, Jordi Gonzalez, & Thomas B. Moeslund. (2013). Analysis and Retrieval of Tracked Events and Motion in Imagery Streams.
|
Naveen Onkarappa, & Angel Sappa. (2011). Space Variant Representations for Mobile Platform Vision Applications. In W. Kropatsch A. Berciano H. Molina D. D. P. Real (Ed.), 14th International Conference on Computer Analysis of Images and Patterns (Vol. 6855, pp. 146–154). Springer Berlin Heidelberg.
Abstract: The log-polar space variant representation, motivated by biological vision, has been widely studied in the literature. Its data reduction and invariance properties made it useful in many vision applications. However, due to its nature, it fails in preserving features in the periphery. In the current work, as an attempt to overcome this problem, we propose a novel space-variant representation. It is evaluated and proved to be better than the log-polar representation in preserving the peripheral information, crucial for on-board mobile vision applications. The evaluation is performed by comparing log-polar and the proposed representation once they are used for estimating dense optical flow.
|
Lluis Pere de las Heras, Ahmed Sheraz, Marcus Liwicki, Ernest Valveny, & Gemma Sanchez. (2014). Statistical Segmentation and Structural Recognition for Floor Plan Interpretation. IJDAR - International Journal on Document Analysis and Recognition, 17(3), 221–237.
Abstract: A generic method for floor plan analysis and interpretation is presented in this article. The method, which is mainly inspired by the way engineers draw and interpret floor plans, applies two recognition steps in a bottom-up manner. First, basic building blocks, i.e., walls, doors, and windows are detected using a statistical patch-based segmentation approach. Second, a graph is generated, and structural pattern recognition techniques are applied to further locate the main entities, i.e., rooms of the building. The proposed approach is able to analyze any type of floor plan regardless of the notation used. We have evaluated our method on different publicly available datasets of real architectural floor plans with different notations. The overall detection and recognition accuracy is about 95 %, which is significantly better than any other state-of-the-art method. Our approach is generic enough such that it could be easily adopted to the recognition and interpretation of any other printed machine-generated structured documents.
|
H. Emrah Tasli, Cevahir Çigla, Theo Gevers, & A. Aydin Alatan. (2013). Super pixel extraction via convexity induced boundary adaptation. In 14th IEEE International Conference on Multimedia and Expo (pp. 1–6).
Abstract: This study presents an efficient super-pixel extraction algorithm with major contributions to the state-of-the-art in terms of accuracy and computational complexity. Segmentation accuracy is improved through convexity constrained geodesic distance utilization; while computational efficiency is achieved by replacing complete region processing with boundary adaptation idea. Starting from the uniformly distributed rectangular equal-sized super-pixels, region boundaries are adapted to intensity edges iteratively by assigning boundary pixels to the most similar neighboring super-pixels. At each iteration, super-pixel regions are updated and hence progressively converging to compact pixel groups. Experimental results with state-of-the-art comparisons, validate the performance of the proposed technique in terms of both accuracy and speed.
|
H. Emrah Tasli, Jan van Gemert, & Theo Gevers. (2013). Spot the differences: from a photograph burst to the single best picture. In 21ST ACM International Conference on Multimedia (pp. 729–732).
Abstract: With the rise of the digital camera, people nowadays typically take several near-identical photos of the same scene to maximize the chances of a good shot. This paper proposes a user-friendly tool for exploring a personal photo gallery for selecting or even creating the best shot of a scene between its multiple alternatives. This functionality is realized through a graphical user interface where the best viewpoint can be selected from a generated panorama of the scene. Once the viewpoint is selected, the user is able to go explore possible alternatives coming from the other images. Using this tool, one can explore a photo gallery efficiently. Moreover, additional compositions from other images are also possible. With such additional compositions, one can go from a burst of photographs to the single best one. Even funny compositions of images, where you can duplicate a person in the same image, are possible with our proposed tool.
|
|
Sezer Karaoglu, Jan van Gemert, & Theo Gevers. (2013). Con-text: text detection using background connectivity for fine-grained object classification. In 21ST ACM International Conference on Multimedia (pp. 757–760).
|
Ivo Everts, Jan van Gemert, & Theo Gevers. (2013). Evaluation of Color STIPs for Human Action Recognition. In IEEE Conference on Computer Vision and Pattern Recognition (pp. 2850–2857).
Abstract: This paper is concerned with recognizing realistic human actions in videos based on spatio-temporal interest points (STIPs). Existing STIP-based action recognition approaches operate on intensity representations of the image data. Because of this, these approaches are sensitive to disturbing photometric phenomena such as highlights and shadows. Moreover, valuable information is neglected by discarding chromaticity from the photometric representation. These issues are addressed by Color STIPs. Color STIPs are multi-channel reformulations of existing intensity-based STIP detectors and descriptors, for which we consider a number of chromatic representations derived from the opponent color space. This enhanced modeling of appearance improves the quality of subsequent STIP detection and description. Color STIPs are shown to substantially outperform their intensity-based counterparts on the challenging UCF~sports, UCF11 and UCF50 action recognition benchmarks. Moreover, the results show that color STIPs are currently the single best low-level feature choice for STIP-based approaches to human action recognition.
|
Fares Alnajar, Theo Gevers, Roberto Valenti, & Sennay Ghebreab. (2013). Calibration-free Gaze Estimation using Human Gaze Patterns. In 15th IEEE International Conference on Computer Vision (pp. 137–144).
Abstract: We present a novel method to auto-calibrate gaze estimators based on gaze patterns obtained from other viewers. Our method is based on the observation that the gaze patterns of humans are indicative of where a new viewer will look at [12]. When a new viewer is looking at a stimulus, we first estimate a topology of gaze points (initial gaze points). Next, these points are transformed so that they match the gaze patterns of other humans to find the correct gaze points. In a flexible uncalibrated setup with a web camera and no chin rest, the proposed method was tested on ten subjects and ten images. The method estimates the gaze points after looking at a stimulus for a few seconds with an average accuracy of 4.3 im. Although the reported performance is lower than what could be achieved with dedicated hardware or calibrated setup, the proposed method still provides a sufficient accuracy to trace the viewer attention. This is promising considering the fact that auto-calibration is done in a flexible setup , without the use of a chin rest, and based only on a few seconds of gaze initialization data. To the best of our knowledge, this is the first work to use human gaze patterns in order to auto-calibrate gaze estimators.
|
Hamdi Dibeklioglu, Albert Ali Salah, & Theo Gevers. (2013). Like Father, Like Son: Facial Expression Dynamics for Kinship Verification. In 15th IEEE International Conference on Computer Vision (pp. 1497–1504).
Abstract: Kinship verification from facial appearance is a difficult problem. This paper explores the possibility of employing facial expression dynamics in this problem. By using features that describe facial dynamics and spatio-temporal appearance over smile expressions, we show that it is possible to improve the state of the art in this problem, and verify that it is indeed possible to recognize kinship by resemblance of facial expressions. The proposed method is tested on different kin relationships. On the average, 72.89% verification accuracy is achieved on spontaneous smiles.
|
Jasper Uilings, Koen E.A. van de Sande, Theo Gevers, & Arnold Smeulders. (2013). Selective Search for Object Recognition. IJCV - International Journal of Computer Vision, 104(2), 154–171.
Abstract: This paper addresses the problem of generating possible object locations for use in object recognition. We introduce selective search which combines the strength of both an exhaustive search and segmentation. Like segmentation, we use the image structure to guide our sampling process. Like exhaustive search, we aim to capture all possible object locations. Instead of a single technique to generate possible object locations, we diversify our search and use a variety of complementary image partitionings to deal with as many image conditions as possible. Our selective search results in a small set of data-driven, class-independent, high quality locations, yielding 99 % recall and a Mean Average Best Overlap of 0.879 at 10,097 locations. The reduced number of locations compared to an exhaustive search enables the use of stronger machine learning techniques and stronger appearance models for object recognition. In this paper we show that our selective search enables the use of the powerful Bag-of-Words model for recognition. The selective search software is made publicly available (Software: http://disi.unitn.it/~uijlings/SelectiveSearch.html).
|
Zeynep Yucel, Albert Ali Salah, Çetin Meriçli, Tekin Meriçli, Roberto Valenti, & Theo Gevers. (2013). Joint Attention by Gaze Interpolation and Saliency. T-CIBER - IEEE Transactions on cybernetics, 829–842.
Abstract: Joint attention, which is the ability of coordination of a common point of reference with the communicating party, emerges as a key factor in various interaction scenarios. This paper presents an image-based method for establishing joint attention between an experimenter and a robot. The precise analysis of the experimenter's eye region requires stability and high-resolution image acquisition, which is not always available. We investigate regression-based interpolation of the gaze direction from the head pose of the experimenter, which is easier to track. Gaussian process regression and neural networks are contrasted to interpolate the gaze direction. Then, we combine gaze interpolation with image-based saliency to improve the target point estimates and test three different saliency schemes. We demonstrate the proposed method on a human-robot interaction scenario. Cross-subject evaluations, as well as experiments under adverse conditions (such as dimmed or artificial illumination or motion blur), show that our method generalizes well and achieves rapid gaze estimation for establishing joint attention.
|
Jorge Bernal, F. Javier Sanchez, & Fernando Vilariño. (2011). Current Challenges on Polyp Detection in Colonoscopy Videos: From Region Segmentation to Region Classification. a Pattern Recognition-based Approach.ased Approach. In K. Djemal (Ed.), 2nd International Workshop on Medical Image Analysis and Descriptionfor Diagnosis Systems (pp. 62–71). SciTePress.
Abstract: In this paper we present our approach on real-time polyp detection in colonoscopy videos. Our method consists of three stages: Image Segmentation, Region Description and Image Classification. Taking into account the constraints of our project, we introduce our segmentation system that is based on the model of appearance of the polyp that we have defined after observing real videos from colonoscopy processes. The output of this stage will ideally be a low number of regions of which one of them should cover the whole polyp region (if there is one in the image). This regions will be described in terms of features and, as a result of a machine learning schema, classified based on the values that they have for the several features that we will use on their description. Although we are still on the early stages of the project, we present some preliminary segmentation results that indicates that we are going in a good direction.
Keywords: Medical Imaging, Colonoscopy, Pattern Recognition, Segmentation, Polyp Detection, Region Description, Machine Learning, Real-time.
|
Jorge Bernal, Fernando Vilariño, & F. Javier Sanchez. (2011). Towards Intelligent Systems for Colonoscopy. In Paul Miskovitz (Ed.), Colonoscopy (Vol. 1, pp. 257–282). Intech.
Abstract: In this chapter we present tools that can be used to build intelligent systems for colonoscopy.
The idea is, by using methods based on computer vision and artificial intelligence, add significant value to the colonoscopy procedure. Intelligent systems are being used to assist in other medical interventions
|
Jorge Bernal, F. Javier Sanchez, & Fernando Vilariño. (2011). Integration of Valley Orientation Distribution for Polyp Region Identification in Colonoscopy. In In MICCAI 2011 Workshop on Computational and Clinical Applications in Abdominal Imaging (Vol. 6668, pp. 76–83). Lecture Notes in Computer Science. Springer Link.
Abstract: This work presents a region descriptor based on the integration of the information that the depth of valleys image provides. The depth of valleys image is based on the presence of intensity valleys around polyps due to the image acquisition. Our proposed method consists of defining, for each point, a series of radial sectors around it and then accumulates the maxima of the depth of valleys image only if the orientation of the intensity valley coincides with the orientation of the sector above. We apply our descriptor to a prior segmentation of the images and we present promising results on polyp detection, outperforming other approaches that also integrate depth of valleys information.
|
