Antonio Hernandez, Miguel Reyes, Victor Ponce, & Sergio Escalera. (2012). GrabCut-Based Human Segmentation in Video Sequences. SENS - Sensors, 12(11), 15376–15393.
Abstract: In this paper, we present a fully-automatic Spatio-Temporal GrabCut human segmentation methodology that combines tracking and segmentation. GrabCut initialization is performed by a HOG-based subject detection, face detection, and skin color model. Spatial information is included by Mean Shift clustering whereas temporal coherence is considered by the historical of Gaussian Mixture Models. Moreover, full face and pose recovery is obtained by combining human segmentation with Active Appearance Models and Conditional Random Fields. Results over public datasets and in a new Human Limb dataset show a robust segmentation and recovery of both face and pose using the presented methodology.
Keywords: segmentation; human pose recovery; GrabCut; GraphCut; Active Appearance Models; Conditional Random Field
|
Arnau Ramisa, David Aldavert, Shrihari Vasudevan, Ricardo Toledo, & Ramon Lopez de Mantaras. (2012). Evaluation of Three Vision Based Object Perception Methods for a Mobile Robot. JIRC - Journal of Intelligent and Robotic Systems, 68(2), 185–208.
Abstract: This paper addresses visual object perception applied to mobile robotics. Being able to perceive household objects in unstructured environments is a key capability in order to make robots suitable to perform complex tasks in home environments. However, finding a solution for this task is daunting: it requires the ability to handle the variability in image formation in a moving camera with tight time constraints. The paper brings to attention some of the issues with applying three state of the art object recognition and detection methods in a mobile robotics scenario, and proposes methods to deal with windowing/segmentation. Thus, this work aims at evaluating the state-of-the-art in object perception in an attempt to develop a lightweight solution for mobile robotics use/research in typical indoor settings.
|
Michal Drozdzal, Santiago Segui, Carolina Malagelada, Fernando Azpiroz, & Petia Radeva. (2013). Adaptable image cuts for motility inspection using WCE. CMIG - Computerized Medical Imaging and Graphics, 37(1), 72–80.
Abstract: The Wireless Capsule Endoscopy (WCE) technology allows the visualization of the whole small intestine tract. Since the capsule is freely moving, mainly by the means of peristalsis, the data acquired during the study gives a lot of information about the intestinal motility. However, due to: (1) huge amount of frames, (2) complex intestinal scene appearance and (3) intestinal dynamics that make difficult the visualization of the small intestine physiological phenomena, the analysis of the WCE data requires computer-aided systems to speed up the analysis. In this paper, we propose an efficient algorithm for building a novel representation of the WCE video data, optimal for motility analysis and inspection. The algorithm transforms the 3D video data into 2D longitudinal view by choosing the most informative, from the intestinal motility point of view, part of each frame. This step maximizes the lumen visibility in its longitudinal extension. The task of finding “the best longitudinal view” has been defined as a cost function optimization problem which global minimum is obtained by using Dynamic Programming. Validation on both synthetic data and WCE data shows that the adaptive longitudinal view is a good alternative to the traditional motility analysis done by video analysis. The proposed novel data representation a new, holistic insight into the small intestine motility, allowing to easily define and analyze motility events that are difficult to spot by analyzing WCE video. Moreover, the visual inspection of small intestine motility is 4 times faster then by means of video skimming of the WCE.
|
Cristhian Aguilera, Fernando Barrera, Felipe Lumbreras, Angel Sappa, & Ricardo Toledo. (2012). Multispectral Image Feature Points. SENS - Sensors, 12(9), 12661–12672.
Abstract: Far-Infrared and Visible Spectrum images. It allows matching interest points on images of the same scene but acquired in different spectral bands. Initially, points of interest are detected on both images through a SIFT-like based scale space representation. Then, these points are characterized using an Edge Oriented Histogram (EOH) descriptor. Finally, points of interest from multispectral images are matched by finding nearest couples using the information from the descriptor. The provided experimental results and comparisons with similar methods show both the validity of the proposed approach as well as the improvements it offers with respect to the current state-of-the-art.
Keywords: multispectral image descriptor; color and infrared images; feature point descriptor
|
Fernando Barrera, Felipe Lumbreras, & Angel Sappa. (2012). Multimodal Stereo Vision System: 3D Data Extraction and Algorithm Evaluation. J-STSP - IEEE Journal of Selected Topics in Signal Processing, 6(5), 437–446.
Abstract: This paper proposes an imaging system for computing sparse depth maps from multispectral images. A special stereo head consisting of an infrared and a color camera defines the proposed multimodal acquisition system. The cameras are rigidly attached so that their image planes are parallel. Details about the calibration and image rectification procedure are provided. Sparse disparity maps are obtained by the combined use of mutual information enriched with gradient information. The proposed approach is evaluated using a Receiver Operating Characteristics curve. Furthermore, a multispectral dataset, color and infrared images, together with their corresponding ground truth disparity maps, is generated and used as a test bed. Experimental results in real outdoor scenarios are provided showing its viability and that the proposed approach is not restricted to a specific domain.
|
|
Cristhian Aguilera, M.Ramos, & Angel Sappa. (2012). Simulated Annealing: A Novel Application of Image Processing in the Wood Area. In Marcos de Sales Guerra Tsuzuki (Ed.), Simulated Annealing – Advances, Applications and Hybridizations (pp. 91–104).
|
David Geronimo, Joan Serrat, Antonio Lopez, & Ramon Baldrich. (2013). Traffic sign recognition for computer vision project-based learning. T-EDUC - IEEE Transactions on Education, 56(3), 364–371.
Abstract: This paper presents a graduate course project on computer vision. The aim of the project is to detect and recognize traffic signs in video sequences recorded by an on-board vehicle camera. This is a demanding problem, given that traffic sign recognition is one of the most challenging problems for driving assistance systems. Equally, it is motivating for the students given that it is a real-life problem. Furthermore, it gives them the opportunity to appreciate the difficulty of real-world vision problems and to assess the extent to which this problem can be solved by modern computer vision and pattern classification techniques taught in the classroom. The learning objectives of the course are introduced, as are the constraints imposed on its design, such as the diversity of students' background and the amount of time they and their instructors dedicate to the course. The paper also describes the course contents, schedule, and how the project-based learning approach is applied. The outcomes of the course are discussed, including both the students' marks and their personal feedback.
Keywords: traffic signs
|
Joan Serrat, Felipe Lumbreras, & Antonio Lopez. (2013). Cost estimation of custom hoses from STL files and CAD drawings. COMPUTIND - Computers in Industry, 64(3), 299–309.
Abstract: We present a method for the cost estimation of custom hoses from CAD models. They can come in two formats, which are easy to generate: a STL file or the image of a CAD drawing showing several orthogonal projections. The challenges in either cases are, first, to obtain from them a high level 3D description of the shape, and second, to learn a regression function for the prediction of the manufacturing time, based on geometric features of the reconstructed shape. The chosen description is the 3D line along the medial axis of the tube and the diameter of the circular sections along it. In order to extract it from STL files, we have adapted RANSAC, a robust parametric fitting algorithm. As for CAD drawing images, we propose a new technique for 3D reconstruction from data entered on any number of orthogonal projections. The regression function is a Gaussian process, which does not constrain the function to adopt any specific form and is governed by just two parameters. We assess the accuracy of the manufacturing time estimation by k-fold cross validation on 171 STL file models for which the time is provided by an expert. The results show the feasibility of the method, whereby the relative error for 80% of the testing samples is below 15%.
Keywords: On-line quotation; STL format; Regression; Gaussian process
|
|
Noha Elfiky. (2009). Enhancing Local Binary Patterns with Spatial Pyramid Kernel: Application to Scene Classification (Vol. 129). Master's thesis, , Bellaterra, Barcelona.
|
Onur Ferhat. (2012). Eye-Tracking with Webcam-Based Setups: Implementation of a Real-Time System and an Analysis of Factors Affecting Performance (Fernando Vilariño, Ed.) (Vol. 172). Master's thesis, , .
Abstract: In the recent years commercial eye-tracking hardware has become more common, with the introduction of new models from several brands that have better performance and easier setup procedures. A cause and at the same time a result of this phenomenon is the popularity of eye-tracking research directed at marketing, accessibility and usability, among others.
One problem with these hardware components is scalability, because both the price and the necessary expertise to operate them makes it practically impossible in the large scale. In this work, we analyze the feasibility of a software eye-tracking system based on a single, ordinary webcam. Our aim is to discover the limits of such a system and to see whether it provides acceptable performances.
The significance of this setup is that it is the most common setup found in consumer environments, off-the-shelf electronic devices such as laptops, mobile phones and tablet computers. As no special equipment such as infrared lights, mirrors or zoom lenses are used; setting up and calibrating the system is easier compared to other approaches using these components.
Our work is based on the open source application Opengazer, which provides a good starting point for our contributions. We propose several improvements in order to push the system's performance further and make it feasible as a robust, real-time device. Then we carry out an elaborate experiment involving 18 human subjects and 4 different system setups. Finally, we give an analysis of the results and discuss the effects of setup changes, subject differences and modifications in the software.
Keywords: Computer vision, eye-tracking, gaussian process, feature selection, optical flow
|
Simone Balocco, Carlo Gatta, Marina Alberti, Xavier Carrillo, Juan Rigla, & Petia Radeva. (2012). Relation between plaque type, plaque thickness, blood shear stress and plaque stress in coronary arteries assessed by X-ray Angiography and Intravascular Ultrasound. MEDPHYS - Medical Physics, 39(12), 7430–7445.
Abstract: PMID 23231293
PURPOSE:
Atheromatic plaque progression is affected, among others phenomena, by biomechanical, biochemical, and physiological factors. In this paper, the authors introduce a novel framework able to provide both morphological (vessel radius, plaque thickness, and type) and biomechanical (wall shear stress and Von Mises stress) indices of coronary arteries.
METHODS:
First, the approach reconstructs the three-dimensional morphology of the vessel from intravascular ultrasound (IVUS) and Angiographic sequences, requiring minimal user interaction. Then, a computational pipeline allows to automatically assess fluid-dynamic and mechanical indices. Ten coronary arteries are analyzed illustrating the capabilities of the tool and confirming previous technical and clinical observations.
RESULTS:
The relations between the arterial indices obtained by IVUS measurement and simulations have been quantitatively analyzed along the whole surface of the artery, extending the analysis of the coronary arteries shown in previous state of the art studies. Additionally, for the first time in the literature, the framework allows the computation of the membrane stresses using a simplified mechanical model of the arterial wall.
CONCLUSIONS:
Circumferentially (within a given frame), statistical analysis shows an inverse relation between the wall shear stress and the plaque thickness. At the global level (comparing a frame within the entire vessel), it is observed that heavy plaque accumulations are in general calcified and are located in the areas of the vessel having high wall shear stress. Finally, in their experiments the inverse proportionality between fluid and structural stresses is observed.
|
Cesar Isaza, Joaquin Salas, & Bogdan Raducanu. (2012). Evaluation of Intrinsic Image Algorithms to Detect the Shadows Cast by Static Objects Outdoors. SENS - Sensors, 12(10), 13333–13348.
Abstract: In some automatic scene analysis applications, the presence of shadows becomes a nuisance that is necessary to deal with. As a consequence, a preliminary stage in many computer vision algorithms is to attenuate their effect. In this paper, we focus our attention on the detection of shadows cast by static objects outdoors, as the scene is viewed for extended periods of time (days, weeks) from a fixed camera and considering daylight intervals where the main source of light is the sun. In this context, we report two contributions. First, we introduce the use of synthetic images for which ground truth can be generated automatically, avoiding the tedious effort of manual annotation. Secondly, we report a novel application of the intrinsic image concept to the automatic detection of shadows cast by static objects in outdoors. We make both a quantitative and a qualitative evaluation of several algorithms based on this image representation. For the quantitative evaluation, we used the synthetic data set, while for the qualitative evaluation we used both data sets. Our experimental results show that the evaluated methods can partially solve the problem of shadow detection.
|
Xavier Otazu, Olivier Penacchio, & Laura Dempere-Marco. (2012). Brightness induction by contextual influences in V1: a neurodynamical account. In Journal of Vision (Vol. 12).
Abstract: Brightness induction is the modulation of the perceived intensity of an area by the luminance of surrounding areas and reveals fundamental properties of neural organization in the visual system. Several phenomenological models have been proposed that successfully account for psychophysical data (Pessoa et al. 1995, Blakeslee and McCourt 2004, Barkan et al. 2008, Otazu et al. 2008).
Neurophysiological evidence suggests that brightness information is explicitly represented in V1 and neuronal response modulations have been observed followingluminance changes outside their receptive fields (Rossi and Paradiso, 1999).
In this work we investigate possible neural mechanisms that offer a plausible explanation for such effects. To this end, we consider the model by Z.Li (1999) which is based on biological data and focuses on the part of V1 responsible for contextual influences, namely, layer 2–3 pyramidal cells, interneurons, and horizontal intracortical connections. This model has proven to account for phenomena such as contour detection and preattentive segmentation, which share with brightness induction the relevant effect of contextual influences. In our model, the input to the network is derived from a complete multiscale and multiorientation wavelet decomposition which makes it possible to recover an image reflecting the perceived intensity. The proposed model successfully accounts for well known pyschophysical effects (among them: the White's and modified White's effects, the Todorović, Chevreul, achromatic ring patterns, and grating induction effects). Our work suggests that intra-cortical interactions in the primary visual cortex could partially explain perceptual brightness induction effects and reveals how a common general architecture may account for several different fundamental processes emerging early in the visual pathway.
|
Xavier Otazu. (2012). Perceptual tone-mapping operator based on multiresolution contrast decomposition. In Perception (Vol. 41, 86).
Abstract: Tone-mapping operators (TMO) are used to display high dynamic range(HDR) images in low dynamic range (LDR) displays. Many computational and biologically inspired approaches have been used in the literature, being many of them based on multiresolution decompositions. In this work, a simple two stage model for TMO is presented. The first stage is a novel multiresolution contrast decomposition, which is inspired in a pyramidal contrast decomposition (Peli, 1990 Journal of the Optical Society of America7(10), 2032-2040).
This novel multiresolution decomposition represents the Michelson contrast of the image at different spatial scales. This multiresolution contrast representation, applied on the intensity channel of an opponent colour decomposition, is processed by a non-linear saturating model of V1 neurons (Albrecht et al, 2002 Journal ofNeurophysiology 88(2) 888-913). This saturation model depends on the visual frequency, and it has been modified in order to include information from the extended Contrast Sensitivity Function (e-CSF) (Otazu et al, 2010 Journal ofVision10(12) 5).
A set of HDR images in Radiance RGBE format (from CIS HDR Photographic Survey and Greg Ward database) have been used to test the model, obtaining a set of LDR images. The resulting LDR images do not show the usual halo or color modification artifacts.
|
Olivier Penacchio, Laura Dempere-Marco, & Xavier Otazu. (2012). Switching off brightness induction through induction-reversed images. In Perception (Vol. 41, 208).
Abstract: Brightness induction is the modulation of the perceived intensity of an
area by the luminance of surrounding areas. Although V1 is traditionally regarded as
an area mostly responsive to retinal information, neurophysiological evidence
suggests that it may explicitly represent brightness information. In this work, we
investigate possible neural mechanisms underlying brightness induction. To this end,
we consider the model by Z Li (1999 Computation and Neural Systems10187-212)
which is constrained by neurophysiological data and focuses on the part of V1
responsible for contextual influences. This model, which has proven to account for
phenomena such as contour detection and preattentive segmentation, shares with
brightness induction the relevant effect of contextual influences. Importantly, the
input to our network model derives from a complete multiscale and multiorientation
wavelet decomposition, which makes it possible to recover an image reflecting the
perceived luminance and successfully accounts for well known psychophysical
effects for both static and dynamic contexts. By further considering inverse problem
techniques we define induction-reversed images: given a target image, we build an
image whose perceived luminance matches the actual luminance of the original
stimulus, thus effectively canceling out brightness induction effects. We suggest that
induction-reversed images may help remove undesired perceptual effects and can
find potential applications in fields such as radiological image interpretation
|
