|
Marina Alberti, Carlo Gatta, Simone Balocco, Francesco Ciompi, Oriol Pujol, Joana Silva, et al. (2011). Automatic Branching Detection in IVUS Sequences. In Jordi Vitria, Joao Miguel Raposo, & Mario Hernandez (Eds.), 5th Iberian Conference on Pattern Recognition and Image Analysis (Vol. 6669, pp. 126–133). LNCS. Berlin: Springer Berlin Heidelberg.
Abstract: Atherosclerosis is a vascular pathology affecting the arterial walls, generally located in specific vessel sites, such as bifurcations. In this paper, for the first time, a fully automatic approach for the detection of bifurcations in IVUS pullback sequences is presented. The method identifies the frames and the angular sectors in which a bifurcation is visible. This goal is achieved by applying a classifier to a set of textural features extracted from each image of an IVUS pullback. A comparison between two state-of-the-art classifiers is performed, AdaBoost and Random Forest. A cross-validation scheme is applied in order to evaluate the performances of the approaches. The obtained results are encouraging, showing a sensitivity of 75% and an accuracy of 94% by using the AdaBoost algorithm.
|
|
|
Jose Manuel Alvarez, Theo Gevers, Ferran Diego, & Antonio Lopez. (2013). Road Geometry Classification by Adaptative Shape Models. TITS - IEEE Transactions on Intelligent Transportation Systems, 14(1), 459–468.
Abstract: Vision-based road detection is important for different applications in transportation, such as autonomous driving, vehicle collision warning, and pedestrian crossing detection. Common approaches to road detection are based on low-level road appearance (e.g., color or texture) and neglect of the scene geometry and context. Hence, using only low-level features makes these algorithms highly depend on structured roads, road homogeneity, and lighting conditions. Therefore, the aim of this paper is to classify road geometries for road detection through the analysis of scene composition and temporal coherence. Road geometry classification is proposed by building corresponding models from training images containing prototypical road geometries. We propose adaptive shape models where spatial pyramids are steered by the inherent spatial structure of road images. To reduce the influence of lighting variations, invariant features are used. Large-scale experiments show that the proposed road geometry classifier yields a high recognition rate of 73.57% ± 13.1, clearly outperforming other state-of-the-art methods. Including road shape information improves road detection results over existing appearance-based methods. Finally, it is shown that invariant features and temporal information provide robustness against disturbing imaging conditions.
Keywords: road detection
|
|
|
Jon Almazan, Albert Gordo, Alicia Fornes, & Ernest Valveny. (2013). Handwritten Word Spotting with Corrected Attributes. In 15th IEEE International Conference on Computer Vision (pp. 1017–1024).
Abstract: We propose an approach to multi-writer word spotting, where the goal is to find a query word in a dataset comprised of document images. We propose an attributes-based approach that leads to a low-dimensional, fixed-length representation of the word images that is fast to compute and, especially, fast to compare. This approach naturally leads to an unified representation of word images and strings, which seamlessly allows one to indistinctly perform query-by-example, where the query is an image, and query-by-string, where the query is a string. We also propose a calibration scheme to correct the attributes scores based on Canonical Correlation Analysis that greatly improves the results on a challenging dataset. We test our approach on two public datasets showing state-of-the-art results.
|
|
|
Jon Almazan, Albert Gordo, Alicia Fornes, & Ernest Valveny. (2014). Word Spotting and Recognition with Embedded Attributes. TPAMI - IEEE Transactions on Pattern Analysis and Machine Intelligence, 36(12), 2552–2566.
Abstract: This article addresses the problems of word spotting and word recognition on images. In word spotting, the goal is to find all instances of a query word in a dataset of images. In recognition, the goal is to recognize the content of the word image, usually aided by a dictionary or lexicon. We describe an approach in which both word images and text strings are embedded in a common vectorial subspace. This is achieved by a combination of label embedding and attributes learning, and a common subspace regression. In this subspace, images and strings that represent the same word are close together, allowing one to cast recognition and retrieval tasks as a nearest neighbor problem. Contrary to most other existing methods, our representation has a fixed length, is low dimensional, and is very fast to compute and, especially, to compare. We test our approach on four public datasets of both handwritten documents and natural images showing results comparable or better than the state-of-the-art on spotting and recognition tasks.
|
|
|
Jon Almazan, Albert Gordo, Alicia Fornes, & Ernest Valveny. (2014). Segmentation-free Word Spotting with Exemplar SVMs. PR - Pattern Recognition, 47(12), 3967–3978.
Abstract: In this paper we propose an unsupervised segmentation-free method for word spotting in document images. Documents are represented with a grid of HOG descriptors, and a sliding-window approach is used to locate the document regions that are most similar to the query. We use the Exemplar SVM framework to produce a better representation of the query in an unsupervised way. Then, we use a more discriminative representation based on Fisher Vector to rerank the best regions retrieved, and the most promising ones are used to expand the Exemplar SVM training set and improve the query representation. Finally, the document descriptors are precomputed and compressed with Product Quantization. This offers two advantages: first, a large number of documents can be kept in RAM memory at the same time. Second, the sliding window becomes significantly faster since distances between quantized HOG descriptors can be precomputed. Our results significantly outperform other segmentation-free methods in the literature, both in accuracy and in speed and memory usage.
Keywords: Word spotting; Segmentation-free; Unsupervised learning; Reranking; Query expansion; Compression
|
|
|
Aitor Alvarez-Gila, Adrian Galdran, Estibaliz Garrote, & Joost Van de Weijer. (2019). Self-supervised blur detection from synthetically blurred scenes. IMAVIS - Image and Vision Computing, 92, 103804.
Abstract: Blur detection aims at segmenting the blurred areas of a given image. Recent deep learning-based methods approach this problem by learning an end-to-end mapping between the blurred input and a binary mask representing the localization of its blurred areas. Nevertheless, the effectiveness of such deep models is limited due to the scarcity of datasets annotated in terms of blur segmentation, as blur annotation is labor intensive. In this work, we bypass the need for such annotated datasets for end-to-end learning, and instead rely on object proposals and a model for blur generation in order to produce a dataset of synthetically blurred images. This allows us to perform self-supervised learning over the generated image and ground truth blur mask pairs using CNNs, defining a framework that can be employed in purely self-supervised, weakly supervised or semi-supervised configurations. Interestingly, experimental results of such setups over the largest blur segmentation datasets available show that this approach achieves state of the art results in blur segmentation, even without ever observing any real blurred image.
|
|
|
Jon Almazan, Lluis Gomez, Suman Ghosh, Ernest Valveny, & Dimosthenis Karatzas. (2020). WATTS: A common representation of word images and strings using embedded attributes for text recognition and retrieval. In K. A. Analysis”, & C.V. Jawahar (Eds.), Visual Text Interpretation – Algorithms and Applications in Scene Understanding and Document Analysis. Series on Advances in Computer Vision and Pattern Recognition. Springer.
|
|
|
Jose Manuel Alvarez, Theo Gevers, Y. LeCun, & Antonio Lopez. (2012). Road Scene Segmentation from a Single Image. In 12th European Conference on Computer Vision (Vol. 7578, pp. 376–389). LNCS. Springer Berlin Heidelberg.
Abstract: Road scene segmentation is important in computer vision for different applications such as autonomous driving and pedestrian detection. Recovering the 3D structure of road scenes provides relevant contextual information to improve their understanding.
In this paper, we use a convolutional neural network based algorithm to learn features from noisy labels to recover the 3D scene layout of a road image. The novelty of the algorithm relies on generating training labels by applying an algorithm trained on a general image dataset to classify on–board images. Further, we propose a novel texture descriptor based on a learned color plane fusion to obtain maximal uniformity in road areas. Finally, acquired (off–line) and current (on–line) information are combined to detect road areas in single images.
From quantitative and qualitative experiments, conducted on publicly available datasets, it is concluded that convolutional neural networks are suitable for learning 3D scene layout from noisy labels and provides a relative improvement of 7% compared to the baseline. Furthermore, combining color planes provides a statistical description of road areas that exhibits maximal uniformity and provides a relative improvement of 8% compared to the baseline. Finally, the improvement is even bigger when acquired and current information from a single image are combined
Keywords: road detection
|
|
|
Jose Manuel Alvarez, Theo Gevers, & Antonio Lopez. (2013). Evaluating Color Representation for Online Road Detection. In ICCV Workshop on Computer Vision in Vehicle Technology: From Earth to Mars (pp. 594–595).
Abstract: Detecting traversable road areas ahead a moving vehicle is a key process for modern autonomous driving systems. Most existing algorithms use color to classify pixels as road or background. These algorithms reduce the effect of lighting variations and weather conditions by exploiting the discriminant/invariant properties of different color representations. However, up to date, no comparison between these representations have been conducted. Therefore, in this paper, we perform an evaluation of existing color representations for road detection. More specifically, we focus on color planes derived from RGB data and their most com-
mon combinations. The evaluation is done on a set of 7000 road images acquired
using an on-board camera in different real-driving situations.
|
|
|
Arash Akbarinia, Raquel Gil Rodriguez, & C. Alejandro Parraga. (2017). Colour Constancy: Biologically-inspired Contrast Variant Pooling Mechanism. In 28th British Machine Vision Conference.
Abstract: Pooling is a ubiquitous operation in image processing algorithms that allows for higher-level processes to collect relevant low-level features from a region of interest. Currently, max-pooling is one of the most commonly used operators in the computational literature. However, it can lack robustness to outliers due to the fact that it relies merely on the peak of a function. Pooling mechanisms are also present in the primate visual cortex where neurons of higher cortical areas pool signals from lower ones. The receptive fields of these neurons have been shown to vary according to the contrast by aggregating signals over a larger region in the presence of low contrast stimuli. We hypothesise that this contrast-variant-pooling mechanism can address some of the shortcomings of maxpooling. We modelled this contrast variation through a histogram clipping in which the percentage of pooled signal is inversely proportional to the local contrast of an image. We tested our hypothesis by applying it to the phenomenon of colour constancy where a number of popular algorithms utilise a max-pooling step (e.g. White-Patch, Grey-Edge and Double-Opponency). For each of these methods, we investigated the consequences of replacing their original max-pooling by the proposed contrast-variant-pooling. Our experiments on three colour constancy benchmark datasets suggest that previous results can significantly improve by adopting a contrast-variant-pooling mechanism.
|
|
|
Maedeh Aghaei, & Petia Radeva. (2014). Bag-of-Tracklets for Person Tracking in Life-Logging Data. In 17th International Conference of the Catalan Association for Artificial Intelligence (Vol. 269, pp. 35–44).
Abstract: By increasing popularity of wearable cameras, life-logging data analysis is becoming more and more important and useful to derive significant events out of this substantial collection of images. In this study, we introduce a new tracking method applied to visual life-logging, called bag-of-tracklets, which is based on detecting, localizing and tracking of people. Given the low spatial and temporal resolution of the image data, our model generates and groups tracklets in a unsupervised framework and extracts image sequences of person appearance according to a similarity score of the bag-of-tracklets. The model output is a meaningful sequence of events expressing human appearance and tracking them in life-logging data. The achieved results prove the robustness of our model in terms of efficiency and accuracy despite the low spatial and temporal resolution of the data.
|
|
|
Eduardo Aguilar, & Petia Radeva. (2019). Class-Conditional Data Augmentation Applied to Image Classification. In 18th International Conference on Computer Analysis of Images and Patterns (Vol. 11679, pp. 182–192). LNCS.
Abstract: Image classification is widely researched in the literature, where models based on Convolutional Neural Networks (CNNs) have provided better results. When data is not enough, CNN models tend to be overfitted. To deal with this, often, traditional techniques of data augmentation are applied, such as: affine transformations, adjusting the color balance, among others. However, we argue that some techniques of data augmentation may be more appropriate for some of the classes. In order to select the techniques that work best for particular class, we propose to explore the epistemic uncertainty for the samples within each class. From our experiments, we can observe that when the data augmentation is applied class-conditionally, we improve the results in terms of accuracy and also reduce the overall epistemic uncertainty. To summarize, in this paper we propose a class-conditional data augmentation procedure that allows us to obtain better results and improve robustness of the classification in the face of model uncertainty.
Keywords: CNNs; Data augmentation; Deep learning; Epistemic uncertainty; Image classification; Food recognition
|
|
|
Eduardo Aguilar, & Petia Radeva. (2019). Food Recognition by Integrating Local and Flat Classifiers. In 9th Iberian Conference on Pattern Recognition and Image Analysis (Vol. 11867, pp. 65–74). LNCS.
Abstract: The recognition of food image is an interesting research topic, in which its applicability in the creation of nutritional diaries stands out with the aim of improving the quality of life of people with a chronic disease (e.g. diabetes, heart disease) or prone to acquire it (e.g. people with overweight or obese). For a food recognition system to be useful in real applications, it is necessary to recognize a huge number of different foods. We argue that for very large scale classification, a traditional flat classifier is not enough to acquire an acceptable result. To address this, we propose a method that performs prediction with local classifiers, based on a class hierarchy, or with flat classifier. We decide which approach to use, depending on the analysis of both the Epistemic Uncertainty obtained for the image in the children classifiers and the prediction of the parent classifier. When our criterion is met, the final prediction is obtained with the respective local classifier; otherwise, with the flat classifier. From the results, we can see that the proposed method improves the classification performance compared to the use of a single flat classifier.
|
|
|
Eduardo Aguilar, & Petia Radeva. (2020). Uncertainty-aware integration of local and flat classifiers for food recognition. PRL - Pattern Recognition Letters, 136, 237–243.
Abstract: Food image recognition has recently attracted the attention of many researchers, due to the challenging problem it poses, the ease collection of food images, and its numerous applications to health and leisure. In real applications, it is necessary to analyze and recognize thousands of different foods. For this purpose, we propose a novel prediction scheme based on a class hierarchy that considers local classifiers, in addition to a flat classifier. In order to make a decision about which approach to use, we define different criteria that take into account both the analysis of the Epistemic Uncertainty estimated from the ‘children’ classifiers and the prediction from the ‘parent’ classifier. We evaluate our proposal using three Uncertainty estimation methods, tested on two public food datasets. The results show that the proposed method reduces parent-child error propagation in hierarchical schemes and improves classification results compared to the single flat classifier, meanwhile maintains good performance regardless the Uncertainty estimation method chosen.
|
|
|
Cristhian Aguilera. (2017). Local feature description in cross-spectral imagery (Angel Sappa, Ed.). Ph.D. thesis, Ediciones Graficas Rey, .
Abstract: Over the last few years, the number of consumer computer vision applications has increased dramatically. Today, computer vision solutions can be found in video game consoles, smartphone applications, driving assistance – just to name a few. Ideally, we require the performance of those applications, particularly those that are safety critical to remain constant under any external environment factors, such as changes in illumination or weather conditions. However, this is not always possible or very difficult to obtain by only using visible imagery, due to the inherent limitations of the images from that spectral band. For that reason, the use of images from different or multiple spectral bands is becoming more appealing.
The aforementioned possible advantages of using images from multiples spectral bands on various vision applications make multi-spectral image processing a relevant topic for research and development. Like in visible image processing, multi-spectral image processing needs tools and algorithms to handle information from various spectral bands. Furthermore, traditional tools such as local feature detection, which is the basis of many vision tasks such as visual odometry, image registration, or structure from motion, must be adjusted or reformulated to operate under new conditions. Traditional feature detection, description, and matching methods tend to underperform in multi-spectral settings, in comparison to mono-spectral settings, due to the natural differences between each spectral band.
The work in this thesis is focused on the local feature description problem when cross-spectral images are considered. In this context, this dissertation has three main contributions. Firstly, the work starts by proposing the usage of a combination of frequency and spatial information, in a multi-scale scheme, as feature description. Evaluations of this proposal, based on classical hand-made feature descriptors, and comparisons with state of the art cross-spectral approaches help to find and understand limitations of such strategy. Secondly, different convolutional neural network (CNN) based architectures are evaluated when used to describe cross-spectral image patches. Results showed that CNN-based methods, designed to work with visible monocular images, could be successfully applied to the description of images from two different spectral bands, with just minor modifications. In this framework, a novel CNN-based network model, specifically intended to describe image patches from two different spectral bands, is proposed. This network, referred to as Q-Net, outperforms state of the art in the cross-spectral domain, including both previous hand-made solutions as well as L2 CNN-based architectures. The third contribution of this dissertation is in the cross-spectral feature description application domain. The multispectral odometry problem is tackled showing a real application of cross-spectral descriptors
In addition to the three main contributions mentioned above, in this dissertation, two different multi-spectral datasets are generated and shared with the community to be used as benchmarks for further studies.
|
|