M. Campos-Taberner, Adriana Romero, Carlo Gatta, & Gustavo Camps-Valls. (2015). Shared feature representations of LiDAR and optical images: Trading sparsity for semantic discrimination. In IEEE International Geoscience and Remote Sensing Symposium IGARSS2015 (pp. 4169–4172).
Abstract: This paper studies the level of complementary information conveyed by extremely high resolution LiDAR and optical images. We pursue this goal following an indirect approach via unsupervised spatial-spectral feature extraction. We used a recently presented unsupervised convolutional neural network trained to enforce both population and lifetime spar-sity in the feature representation. We derived independent and joint feature representations, and analyzed the sparsity scores and the discriminative power. Interestingly, the obtained results revealed that the RGB+LiDAR representation is no longer sparse, and the derived basis functions merge color and elevation yielding a set of more expressive colored edge filters. The joint feature representation is also more discriminative when used for clustering and topological data visualization.
|
Lluis Pere de las Heras, Oriol Ramos Terrades, Sergi Robles, & Gemma Sanchez. (2015). CVC-FP and SGT: a new database for structural floor plan analysis and its groundtruthing tool. IJDAR - International Journal on Document Analysis and Recognition, 18(1), 15–30.
Abstract: Recent results on structured learning methods have shown the impact of structural information in a wide range of pattern recognition tasks. In the field of document image analysis, there is a long experience on structural methods for the analysis and information extraction of multiple types of documents. Yet, the lack of conveniently annotated and free access databases has not benefited the progress in some areas such as technical drawing understanding. In this paper, we present a floor plan database, named CVC-FP, that is annotated for the architectural objects and their structural relations. To construct this database, we have implemented a groundtruthing tool, the SGT tool, that allows to make specific this sort of information in a natural manner. This tool has been made for general purpose groundtruthing: It allows to define own object classes and properties, multiple labeling options are possible, grants the cooperative work, and provides user and version control. We finally have collected some of the recent work on floor plan interpretation and present a quantitative benchmark for this database. Both CVC-FP database and the SGT tool are freely released to the research community to ease comparisons between methods and boost reproducible research.
|
Lluis Pere de las Heras, Oriol Ramos Terrades, Josep Llados, David Fernandez, & Cristina Cañero. (2015). Use case visual Bag-of-Words techniques for camera based identity document classification. In 13th International Conference on Document Analysis and Recognition ICDAR2015 (pp. 721–725).
Abstract: Nowadays, automatic identity document recognition, including passport and driving license recognition, is at the core of many applications within the administrative and service sectors, such as police, hospitality, car renting, etc. In former years, the document information was manually extracted whereas today this data is recognized automatically from images obtained by flat-bed scanners. Yet, since these scanners tend to be expensive and voluminous, companies in the sector have recently turned their attention to cheaper, small and yet computationally powerful scanners: the mobile devices. The document identity recognition from mobile images enclose several new difficulties w.r.t traditional scanned images, such as the loss of a controlled background, perspective, blurring, etc. In this paper we present a real application for identity document classification of images taken from mobile devices. This classification process is of extreme importance since a prior knowledge of the document type and origin strongly facilitates the subsequent information extraction. The proposed method is based on a traditional Bagof-Words in which we have taken into consideration several key aspects to enhance recognition rate. The method performance has been studied on three datasets containing more than 2000 images from 129 different document classes.
|
Lluis Pere de las Heras, Oriol Ramos Terrades, & Josep Llados. (2015). Attributed Graph Grammar for floor plan analysis. In 13th International Conference on Document Analysis and Recognition ICDAR2015 (pp. 726–730).
Abstract: In this paper, we propose the use of an Attributed Graph Grammar as unique framework to model and recognize the structure of floor plans. This grammar represents a building as a hierarchical composition of structurally and semantically related elements, where common representations are learned stochastically from annotated data. Given an input image, the parsing consists on constructing that graph representation that better agrees with the probabilistic model defined by the grammar. The proposed method provides several advantages with respect to the traditional floor plan analysis techniques. It uses an unsupervised statistical approach for detecting walls that adapts to different graphical notations and relaxes strong structural assumptions such are straightness and orthogonality. Moreover, the independence between the knowledge model and the parsing implementation allows the method to learn automatically different building configurations and thus, to cope the existing variability. These advantages are clearly demonstrated by comparing it with the most recent floor plan interpretation techniques on 4 datasets of real floor plans with different notations.
|
Lluis Gomez, & Dimosthenis Karatzas. (2015). Object Proposals for Text Extraction in the Wild. In 13th International Conference on Document Analysis and Recognition ICDAR2015 (pp. 206–210).
Abstract: Object Proposals is a recent computer vision technique receiving increasing interest from the research community. Its main objective is to generate a relatively small set of bounding box proposals that are most likely to contain objects of interest. The use of Object Proposals techniques in the scene text understanding field is innovative. Motivated by the success of powerful while expensive techniques to recognize words in a holistic way, Object Proposals techniques emerge as an alternative to the traditional text detectors. In this paper we study to what extent the existing generic Object Proposals methods may be useful for scene text understanding. Also, we propose a new Object Proposals algorithm that is specifically designed for text and compare it with other generic methods in the state of the art. Experiments show that our proposal is superior in its ability of producing good quality word proposals in an efficient way. The source code of our method is made publicly available
|
Lluis Garrido, M.Guerrieri, & Laura Igual. (2015). Image Segmentation with Cage Active Contours. TIP - IEEE Transactions on Image Processing, 24(12), 5557–5566.
Abstract: In this paper, we present a framework for image segmentation based on parametrized active contours. The evolving contour is parametrized according to a reduced set of control points that form a closed polygon and have a clear visual interpretation. The parametrization, called mean value coordinates, stems from the techniques used in computer graphics to animate virtual models. Our framework allows to easily formulate region-based energies to segment an image. In particular, we present three different local region-based energy terms: 1) the mean model; 2) the Gaussian model; 3) and the histogram model. We show the behavior of our method on synthetic and real images and compare the performance with state-of-the-art level set methods.
Keywords: Level sets; Mean value coordinates; Parametrized active contours; level sets; mean value coordinates
|
Katerine Diaz, Francesc J. Ferri, & W. Diaz. (2015). Incremental Generalized Discriminative Common Vectors for Image Classification. TNNLS - IEEE Transactions on Neural Networks and Learning Systems, 26(8), 1761–1775.
Abstract: Subspace-based methods have become popular due to their ability to appropriately represent complex data in such a way that both dimensionality is reduced and discriminativeness is enhanced. Several recent works have concentrated on the discriminative common vector (DCV) method and other closely related algorithms also based on the concept of null space. In this paper, we present a generalized incremental formulation of the DCV methods, which allows the update of a given model by considering the addition of new examples even from unseen classes. Having efficient incremental formulations of well-behaved batch algorithms allows us to conveniently adapt previously trained classifiers without the need of recomputing them from scratch. The proposed generalized incremental method has been empirically validated in different case studies from different application domains (faces, objects, and handwritten digits) considering several different scenarios in which new data are continuously added at different rates starting from an initial model.
|
Kamal Nasrollahi, Sergio Escalera, P. Rasti, Gholamreza Anbarjafari, Xavier Baro, Hugo Jair Escalante, et al. (2015). Deep Learning based Super-Resolution for Improved Action Recognition. In 5th International Conference on Image Processing Theory, Tools and Applications IPTA2015 (pp. 67–72).
Abstract: Action recognition systems mostly work with videos of proper quality and resolution. Even most challenging benchmark databases for action recognition, hardly include videos of low-resolution from, e.g., surveillance cameras. In videos recorded by such cameras, due to the distance between people and cameras, people are pictured very small and hence challenge action recognition algorithms. Simple upsampling methods, like bicubic interpolation, cannot retrieve all the detailed information that can help the recognition. To deal with this problem, in this paper we combine results of bicubic interpolation with results of a state-ofthe-art deep learning-based super-resolution algorithm, through an alpha-blending approach. The experimental results obtained on down-sampled version of a large subset of Hoolywood2 benchmark database show the importance of the proposed system in increasing the recognition rate of a state-of-the-art action recognition system for handling low-resolution videos.
|
Julie Digne, Mariella Dimiccoli, Neus Sabater, & Philippe Salembier. (2015). Neighborhood Filters and the Recovery of 3D Information. In Handbook of Mathematical Methods in Imaging (pp. 1645–1673). Springer New York.
Abstract: Following their success in image processing (see Chapter Local Smoothing Neighborhood Filters), neighborhood filters have been extended to 3D surface processing. This adaptation is not straightforward. It has led to several variants for surfaces depending on whether the surface is defined as a mesh, or as a raw data point set. The image gray level in the bilateral similarity measure is replaced by a geometric information such as the normal or the curvature. The first section of this chapter reviews the variants of 3D mesh bilateral filters and compares them to the simplest possible isotropic filter, the mean curvature motion.In a second part, this chapter reviews applications of the bilateral filter to a data composed of a sparse depth map (or of depth cues) and of the image on which they have been computed. Such sparse depth cues can be obtained by stereovision or by psychophysical techniques. The underlying assumption to these applications is that pixels with similar intensity around a region are likely to have similar depths. Therefore, when diffusing depth information with a bilateral filter based on locality and color similarity, the discontinuities in depth are assured to be consistent with the color discontinuities, which is generally a desirable property. In the reviewed applications, this ends up with the reconstruction of a dense perceptual depth map from the joint data of an image and of depth cues.
|
Juan Ramon Terven Salinas, Bogdan Raducanu, Maria Elena Meza-de-Luna, & Joaquin Salas. (2015). Evaluating Real-Time Mirroring of Head Gestures using Smart Glasses. In 16th IEEE International Conference on Computer Vision Workshops (pp. 452–460).
Abstract: Mirroring occurs when one person tends to mimic the non-verbal communication of their counterparts. Even though mirroring is a complex phenomenon, in this study, we focus on the detection of head-nodding as a simple non-verbal communication cue due to its significance as a gesture displayed during social interactions. This paper introduces a computer vision-based method to detect mirroring through the analysis of head gestures using wearable cameras (smart glasses). In addition, we study how such a method can be used to explore perceived competence. The proposed method has been evaluated and the experiments demonstrate how static and wearable cameras seem to be equally effective to gather the information required for the analysis.
|
Juan Ignacio Toledo, Jordi Cucurull, Jordi Puiggali, Alicia Fornes, & Josep Llados. (2015). Document Analysis Techniques for Automatic Electoral Document Processing: A Survey. In E-Voting and Identity, Proceedings of 5th international conference, VoteID 2015 (pp. 139–141). LNCS.
Abstract: In this paper, we will discuss the most common challenges in electoral document processing and study the different solutions from the document analysis community that can be applied in each case. We will cover Optical Mark Recognition techniques to detect voter selections in the Australian Ballot, handwritten number recognition for preferential elections and handwriting recognition for write-in areas. We will also propose some particular adjustments that can be made to those general techniques in the specific context of electoral documents.
Keywords: Document image analysis; Computer vision; Paper ballots; Paper based elections; Optical scan; Tally
|
Josep M. Gonfaus, Marco Pedersoli, Jordi Gonzalez, Andrea Vedaldi, & Xavier Roca. (2015). Factorized appearances for object detection. CVIU - Computer Vision and Image Understanding, 138, 92–101.
Abstract: Deformable object models capture variations in an object’s appearance that can be represented as image deformations. Other effects such as out-of-plane rotations, three-dimensional articulations, and self-occlusions are often captured by considering mixture of deformable models, one per object aspect. A more scalable approach is representing instead the variations at the level of the object parts, applying the concept of a mixture locally. Combining a few part variations can in fact cheaply generate a large number of global appearances.
A limited version of this idea was proposed by Yang and Ramanan [1], for human pose dectection. In this paper we apply it to the task of generic object category detection and extend it in several ways. First, we propose a model for the relationship between part appearances more general than the tree of Yang and Ramanan [1], which is more suitable for generic categories. Second, we treat part locations as well as their appearance as latent variables so that training does not need part annotations but only the object bounding boxes. Third, we modify the weakly-supervised learning of Felzenszwalb et al. and Girshick et al. [2], [3] to handle a significantly more complex latent structure.
Our model is evaluated on standard object detection benchmarks and is found to improve over existing approaches, yielding state-of-the-art results for several object categories.
Keywords: Object recognition; Deformable part models; Learning and sharing parts; Discovering discriminative parts
|
Jorge Bernal, F. Javier Sanchez, Gloria Fernandez Esparrach, Debora Gil, Cristina Rodriguez de Miguel, & Fernando Vilariño. (2015). WM-DOVA Maps for Accurate Polyp Highlighting in Colonoscopy: Validation vs. Saliency Maps from Physicians. CMIG - Computerized Medical Imaging and Graphics, 43, 99–111.
Abstract: We introduce in this paper a novel polyp localization method for colonoscopy videos. Our method is based on a model of appearance for polyps which defines polyp boundaries in terms of valley information. We propose the integration of valley information in a robust way fostering complete, concave and continuous boundaries typically associated to polyps. This integration is done by using a window of radial sectors which accumulate valley information to create WMDOVA1 energy maps related with the likelihood of polyp presence. We perform a double validation of our maps, which include the introduction of two new databases, including the first, up to our knowledge, fully annotated database with clinical metadata associated. First we assess that the highest value corresponds with the location of the polyp in the image. Second, we show that WM-DOVA energy maps can be comparable with saliency maps obtained from physicians' fixations obtained via an eye-tracker. Finally, we prove that our method outperforms state-of-the-art computational saliency results. Our method shows good performance, particularly for small polyps which are reported to be the main sources of polyp miss-rate, which indicates the potential applicability of our method in clinical practice.
Keywords: Polyp localization; Energy Maps; Colonoscopy; Saliency; Valley detection
|
Jorge Bernal, F. Javier Sanchez, Cristina Rodriguez de Miguel, & Gloria Fernandez Esparrach. (2015). Bulding up the future of colonoscopy: A synergy between clinicians and computer scientists. In Colonoscopy and Colorectal Cancer.
Abstract: Recent advances in endoscopic technology have generated an increasing interest in strengthening the collaboration between clinicians and computers scientist to develop intelligent systems that can provide additional information to clinicians in the different stages of an intervention. The objective of this chapter is to identify clinical drawbacks of colonoscopy in order to define potential areas of collaboration. Once areas are defined, we present the challenges that colonoscopy images present in order computational methods to provide with meaningful output, including those related to image formation and acquisition, as they are proven to have an impact in the performance of an intelligent system. Finally, we also propose how to define validation frameworks in order to assess the performance of a given method, making an special emphasis on how databases should be created and annotated and which metrics should be used to evaluate systems correctly.
Keywords: Intelligent systems; Image properties; Validation; Clinical drawbacks; Endoluminal scene description
|
Jordina Torrents-Barrena, Aida Valls, Petia Radeva, Meritxell Arenas, & Domenec Puig. (2015). Automatic Recognition of Molecular Subtypes of Breast Cancer in X-Ray images using Segmentation-based Fractal Texture Analysis. In Artificial Intelligence Research and Development (Vol. 277, pp. 247–256). Frontiers in Artificial Intelligence and Applications. IOS Press.
Abstract: Breast cancer disease has recently been classified into four subtypes regarding the molecular properties of the affected tumor region. For each patient, an accurate diagnosis of the specific type is vital to decide the most appropriate therapy in order to enhance life prospects. Nowadays, advanced therapeutic diagnosis research is focused on gene selection methods, which are not robust enough. Hence, we hypothesize that computer vision algorithms can offer benefits to address the problem of discriminating among them through X-Ray images. In this paper, we propose a novel approach driven by texture feature descriptors and machine learning techniques. First, we segment the tumour part through an active contour technique and then, we perform a complete fractal analysis to collect qualitative information of the region of interest in the feature extraction stage. Finally, several supervised and unsupervised classifiers are used to perform multiclass classification of the aforementioned data. The experimental results presented in this paper support that it is possible to establish a relation between each tumor subtype and the extracted features of the patterns revealed on mammograms.
|
