Abstract: The image sensor, nowadays, is rolling the smartphone industry. While some phone brands explore equipping more image sensors, others, like Google, maintain their smartphones with just one sensor; but this sensor is equipped with Deep Learning to enhance the image quality. However, what all brands agree on is the need to research new image sensors; for instance, in 2015 Omnivision and PixelTeq presented new CMOS based image sensors defined as multispectral Single Sensor Camera (SSC), which are capable of capturing multispectral bands. This dissertation presents the benefits of using a multispectral SSCs that, as aforementioned, simultaneously acquires images in the visible and near-infrared (NIR) bands. The principal benefits while addressing problems related to image bands in the spectral range of 400 to 1100 nanometers, there are cost reductions in the hardware and software setup because only one SSC is needed instead of two, and the images alignment are not required any more. Concerning to the NIR spectrum, many works in literature have proven the benefits of working with NIR to enhance RGB images (e.g., image enhancement, remove shadows, dehazing, etc.). In spite of the advantage of using SSC (e.g., low latency), there are some drawback to be solved. One of this drawback corresponds to the nature of the silicon-based sensor, which in addition to capture the RGB image, when the infrared cut off filter is not installed it also acquires NIR information into the visible image. This phenomenon is called RGB and NIR crosstalking. This thesis firstly faces this problem in challenging images and then it shows the benefit of using multispectral images in the edge detection task.
The RGB color restoration from RGBN image is the topic tackled in RGB and NIR crosstalking. Even though in the literature a set of processes have been proposed to face this issue, in this thesis novel approaches, based on DL, are proposed to subtract the additional NIR included in the RGB channel. More precisely, an Artificial Neural Network (NN) and two Convolutional Neural Network (CNN) models are proposed. As the DL based models need a dataset with a large collection of image pairs, a large dataset is collected to address the color restoration. The collected images are from challenging scenes where the sunlight radiation is sufficient to give absorption/reflectance properties to the considered scenes. An extensive evaluation has been conducted on the CNN models, differences from most of the restored images are almost imperceptible to the human eye. The next proposal of the thesis is the validation of the usage of SSC images in the edge detection task. Three methods based on CNN have been proposed. While the first one is based on the most used model, holistically-nested edge detection (HED) termed as multispectral HED (MS-HED), the other two have been proposed observing the drawbacks of MS-HED. These two novel architectures have been designed from scratch (training from scratch); after the first architecture is validated in the visible domain a slight redesign is proposed to tackle the multispectral domain. Again, another dataset is collected to face this problem with SSCs. Even though edge detection is confronted in the multispectral domain, its qualitative and quantitative evaluation demonstrates the generalization in other datasets used for edge detection, improving state-of-the-art results.

Abstract: In the current work, we identify several problems of current tracking systems. The lack of large-scale labeled datasets hampers the usage of deep learning, especially end-to-end training, for tracking in TIR images. Therefore, many methods for tracking on TIR data are still based on hand-crafted features. This situation also happens in multi-modal tracking, e.g. RGB-T tracking. Another reason, which hampers the development of RGB-T tracking, is that there exists little research on the fusion mechanisms for combining information from RGB and TIR modalities. One of the crucial components of most trackers is the update module. For the currently existing end-to-end tracking architecture, e.g, Siamese trackers, the online model update is still not taken into consideration at the training stage. They use no-update or a linear update strategy during the inference stage. While such a hand-crafted approach to updating has led to improved results, its simplicity limits the potential gain likely to be obtained by learning to update.
To address the data-scarcity for TIR and RGB-T tracking, we use image-to-image translation to generate a large-scale synthetic TIR dataset. This dataset allows us to perform end-to-end training for TIR tracking. Furthermore, we investigate several fusion mechanisms for RGB-T tracking. The multi-modal trackers are also trained in an end-to-end manner on the synthetic data. To improve the standard online update, we pose the updating step as an optimization problem which can be solved by training a neural network. Our approach thereby reduces the hand-crafted components in the tracking pipeline and sets a further step in the direction of a complete end-to-end trained tracking network which also considers updating during optimization.

Abstract: Counterfeiting and piracy are a form of theft that has been steadily growing in recent years. A counterfeit is an unauthorized reproduction of an authentic/genuine object. Banknotes and identity documents are two common objects of counterfeiting. The former is used by organized criminal groups to finance a variety of illegal activities or even to destabilize entire countries due the inflation effect. Generally, in order to run their illicit businesses, counterfeiters establish companies and bank accounts using fraudulent identity documents. The illegal activities generated by counterfeit banknotes and identity documents has a damaging effect on business, the economy and the general population. To fight against counterfeiters, governments and authorities around the globe cooperate and develop security features to protect their security documents. Many of the security features in identity documents can also be found in banknotes. In this dissertation we focus our efforts in detecting the counterfeit banknotes and identity documents by analyzing the security features at the background printing. Background areas on secure documents contain fine-line patterns and designs that are difficult to reproduce without the manufacturers cutting-edge printing equipment. Our objective is to find the loose of resolution between the genuine security document and the printed counterfeit version with a publicly available commercial printer. We first present the most complete survey to date in identity and banknote security features. The compared algorithms and systems are based on computer vision and machine learning. Then we advance to present the banknote and identity counterfeit dataset we have built and use along all this thesis. Afterwards, we evaluate and adapt algorithms in the literature for the security background texture analysis. We study this problem from the point of view of robustness, computational efficiency and applicability into a real and non-controlled industrial scenario, proposing key insights to use these algorithms. Next, within the industrial environment of this thesis, we build a complete service oriented architecture to detect counterfeit documents. The mobile application and the server framework intends to be used even by non-expert document examiners to spot counterfeits. Later, we re-frame the problem of background texture counterfeit detection as a full-reference game of spotting the differences, by alternating glimpses between a counterfeit and a genuine background using recurrent neural networks. Finally, we deal with the lack of counterfeit samples, studying different approaches based on anomaly detection.

Abstract: Image generation is arguably one of the most attractive, compelling, and challenging tasks in computer vision. Among the methods which perform image generation, generative adversarial networks (GANs) play a key role. The most common image generation models based on GANs can be divided into two main approaches. The first one, called simply image generation takes random noise as an input and synthesizes an image which follows the same distribution as the images in the training set. The second class, which is called image-to-image translation, aims to map an image from a source domain to one that is indistinguishable from those in the target domain. Image-to-image translation methods can further be divided into paired and unpaired image-to-image translation based on whether they require paired data or not. In this thesis, we aim to address some challenges of both image generation and image-to-image generation.GANs highly rely upon having access to vast quantities of data, and fail to generate realistic images from random noise when applied to domains with few images. To address this problem, we aim to transfer knowledge from a model trained on a large dataset (source domain) to the one learned on limited data (target domain). We find that both GANs andconditional GANs can benefit from models trained on large datasets. Our experiments show that transferring the discriminator is more important than the generator. Using both the generator and discriminator results in the best performance. We found, however, that this method suffers from overfitting, since we update all parameters to adapt to the target data. We propose a novel architecture, which is tailored to address knowledge transfer to very small target domains. Our approach effectively exploreswhich part of the latent space is more related to the target domain. Additionally, the proposed method is able to transfer knowledge from multiple pretrained GANs. Although image-to-image translation has achieved outstanding performance, it still facesseveral problems. First, for translation between complex domains (such as translations between different modalities) image-to-image translation methods require paired data. We show that when only some of the pairwise translations have been seen (i.e. during training), we can infer the remaining unseen translations (where training pairs are not available). We propose a new approach where we align multiple encoders and decoders in such a way that the desired translation can be obtained by simply cascadingthe source encoder and the target decoder, even when they have not interacted during the training stage (i.e. unseen). Second, we address the issue of bias in image-to-image translation. Biased datasets unavoidably contain undesired changes, which are dueto the fact that the target dataset has a particular underlying visual distribution. We use carefully designed semantic constraints to reduce the effects of the bias. The semantic constraint aims to enforce the preservation of desired image properties. Finally, current approaches fail to generate diverse outputs or perform scalable image transfer in a single model. To alleviate this problem, we propose a scalable and diverse image-to-image translation. We employ random noise to control the diversity. The scalabitlity is determined by conditioning the domain label.computer vision, deep learning, imitation learning, adversarial generative networks, image generation, image-to-image translation.

Abstract: This book compiles leading research on the development of explainable and interpretable machine learning methods in the context of computer vision and machine learning.
Research progress in computer vision and pattern recognition has led to a variety of modeling techniques with almost human-like performance. Although these models have obtained astounding results, they are limited in their explainability and interpretability: what is the rationale behind the decision made? what in the model structure explains its functioning? Hence, while good performance is a critical required characteristic for learning machines, explainability and interpretability capabilities are needed to take learning machines to the next step to include them in decision support systems involving human supervision.
This book, written by leading international researchers, addresses key topics of explainability and interpretability, including the following:

·Evaluation and Generalization in Interpretable Machine Learning
·Explanation Methods in Deep Learning
·Learning Functional Causal Models with Generative Neural Networks
·Learning Interpreatable Rules for Multi-Label Classification
·Structuring Neural Networks for More Explainable Predictions
·Generating Post Hoc Rationales of Deep Visual Classification Decisions
·Ensembling Visual Explanations
·Explainable Deep Driving by Visualizing Causal Attention
·Interdisciplinary Perspective on Algorithmic Job Candidate Search
·Multimodal Personality Trait Analysis for Explainable Modeling of Job Interview Decisions
·Inherent Explainability Pattern Theory-based Video Event Interpretations

Abstract: In this work we contribute a novel pipeline to automatically generate training data, and to improve over state-of-the-art multi-object tracking and segmentation (MOTS) methods. Our proposed track mining algorithm turns raw street-level videos into high-fidelity MOTS training data, is scalable and overcomes the need of expensive and time-consuming manual annotation approaches. We leverage state-of-the-art instance segmentation results in combination with optical flow predictions, also trained on automatically harvested training data. Our second major contribution is MOTSNet – a deep learning, tracking-by-detection architecture for MOTS – deploying a novel mask-pooling layer for improved object association over time. Training MOTSNet with our automatically extracted data leads to significantly improved sMOTSA scores on the novel KITTI MOTS dataset (+1.9%/+7.5% on cars/pedestrians), and MOTSNet improves by +4.1% over previously best methods on the MOTSChallenge dataset. Our most impressive finding is that we can improve over previous best-performing works, even in complete absence of manually annotated MOTS training data.

Abstract: In handball videos recorded during the training, multiple players are present in the scene at the same time. Although they all might move and interact, not all players contribute to the currently relevant exercise nor practice the given handball techniques. The goal of this experiment is to automatically determine players on training footage that perform given handball techniques and are therefore considered active. It is a very challenging task for which a precise object detector is needed that can handle cluttered scenes with poor illumination, with many players present in different sizes and distances from the camera, partially occluded, moving fast. To determine which of the detected players are active, additional information is needed about the level of player activity. Since many handball actions are characterized by considerable changes in speed, position, and variations in the player's appearance, we propose using spatio-temporal interest points (STIPs) and optical flow (OF). Therefore, we propose an active player detection method combining the YOLO object detector and two activity measures based on STIPs and OF. The performance of the proposed method and activity measures are evaluated on a custom handball video dataset acquired during handball training lessons.

Abstract: Humans are capable of learning new tasks without forgetting previous ones, while neural networks fail due to catastrophic forgetting between new and previously-learned tasks. We consider a class-incremental setting which means that the task-ID is unknown at inference time. The imbalance between old and new classes typically results in a bias of the network towards the newest ones. This imbalance problem can either be addressed by storing exemplars from previous tasks, or by using image replay methods. However, the latter can only be applied to toy datasets since image generation for complex datasets is a hard problem.
We propose a solution to the imbalance problem based on generative feature replay which does not require any exemplars. To do this, we split the network into two parts: a feature extractor and a classifier. To prevent forgetting, we combine generative feature replay in the classifier with feature distillation in the feature extractor. Through feature generation, our method reduces the complexity of generative replay and prevents the imbalance problem. Our approach is computationally efficient and scalable to large datasets. Experiments confirm that our approach achieves state-of-the-art results on CIFAR-100 and ImageNet, while requiring only a fraction of the storage needed for exemplar-based continual learning